Despite the availability of very economical carbon steels in the market, for applications that desire better mechanical properties and good ductility, most users prefer using grade 304 stainless steel. An austenitic stainless steel grade, the chemical composition of Stainless Steel 304 Flanges gives them an edge over ordinary carbon steel grades. And even though they cost higher than the former alloys, the performance they deliver takes the applications a notch higher. Also known as 18/8, grade 304 has better corrosion resistance properties.
In industries that process nitric acid, it is possible to use grade 304 stainless steel Threaded Pipe Flange at temperatures up to 176°F. However, because this solution is oxidizing, it is can rapidly cause disintegration if used at a concentration higher than 55%. Another industry that works well with this alloy is the food and beverage industry, which uses acetic acid as a preservative. Acetic acid is an organic acid and is corrosive to carbon steels. Yet, the content of nickel present in SS UNS S30400 Blind Flanges prevents the equipment from getting corroded by the use of acidic solutions including acetic acid and phosphoric acid, which is a reductive acid. However, caution is to be thrown while using this alloy with phosphoric acid, because despite being moderately reductive, DIN 1 4301 WNRF Flanges cannot be used at elevated temperatures. Freshwater contains a low level of chloride ions, which would usually affect carbon steel. Yet, ASME SA182 SS 304 Pipe Flanges delivers good performance despite being exposed to chloride ions less than 100 parts per million. With moderate strength properties, this versatile, economic alloy works well in several applications. The tensile properties of the ASTM A182 F304 Slip on Flange could be improved by cold working the alloy.
Specifications List | ASTM A182 / ASME SA182 |
---|---|
Class / Pressure Rating | Class 150, 300, 1500, 600, 900, 2500 LBS, PN40, PN6, PN16, PN10, PN25, PN64 |
Size Chart | 1/2 inch to 48 inch |
ASTM Standards |
ANSI/ASME B16.5, B 16.47 Series A & B, BS 10, B16.48, BS4504, EN-1092 |
Standard | DIN, ANSI, ASME, BS, EN etc. |
Flange Face Type | Lap-Joint Face, Raised Face, Ring Type Joint, Flat Face, Small Tongue, Large Male-Female, Small Male-Female, Large Tongue & Groove Flange manufacturer and Supplier |
Flanges Marking | All Stainless Steel 304 Flanges are marked as follows: Supplier or Manufacturer’s Name, Size, Class, Bore, Dimension, Material, Heat No. (Or according to the customer’s request. |
Stainless Steel 304 Flanges Supplier and Distributors Located in | Jamshedpur, Bengaluru, Thiruvananthapuram, Vadodara, Caracas, Melbourne, Noida, Ranchi, Manama, Kanpur, Bogota, Pimpri Chinchwad, Hyderabad, Gimhae si, Montreal, Surat, Coimbatore, Courbevoie, Bangalore, Ludhiana, Perth, Ankara, Port of Spain, London, Janeiro, Sydney, Gurgaon, Mexico, India, Lagos, Istanbul, Ernakulam, Tehran, Nagpur, Santiago, Mumbai, Abu New Delhi, Howrah, Tau, Karachi, Dhabi, Indore, Ludhiana, Khobar, Chennai, Ahvaz, Rajkot, Kolkata, Calgary, Ahmedabad, Gujarat, Kuwait, Baroda, Riyadh, Muscat, Dammam, |
Stainless Steel 304 Forged Weld Neck Flange
150# Slip-on 10 inch Rf Pipe Flange Stainless Steel 304
Dn 32 125 150 Flat Ss 304 Inch Reducing Raised Face Stainless Steel Flange
Spectacle Blind Flange 300# 4 inch Stainless Steel 304
Ss 304 Welding Neck Orifice Flange
Jis 10k Blind Flange Ff Stainless Steel 304
Decoration 304 Stainless Steel Plate Covers Flange
2inch 304 Stainless Steel Cf 4-way Cross Flange
Stainless Steel 304 Kf16 Flange To 12.7mm
Ansi Standard 304 Stainless Steel Rtj Flange
6 Inch Aisi 304 Stainless Steel Flange
8 Inch 304 Stainless Steel Blind Flanges
Description | Price Per Piece in INR | Price Per Piece in USA $ | Price Per Piece in UAE Dirham |
---|---|---|---|
Stainless Steel 304 Class 150lbs Lap Joint Pipe Flanges | INR 149.21 | USA $ 2.00 | AED 7.35 |
DIN 6 2 Inch Decorative Slip on Welding Neck 304 Stainless Steel Flange | INR 470.02 | USA $ 6.3 | AED 23.14 |
Blind Flange BS4504 Pn16 RF Stainless Steel 304 | INR 141.75 | USA $ 1.90 | AED 6.98 |
304 Stainless Steel Weld Neck Forging Centrifugal Pump Flanges | INR 392.43 | USA $ 5.26 | AED 19.32 |
ASME B16.5 ANSI 304 Stainless Steel Forged RF Welding Neck Flange | INR 119.37 | USA $ 1.60 | AED 5.88 |
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flanges | Table C | 95 | 67 | 4 | 13 | 14 |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flanges | PN6 | 80 | 55 | 4 | M10 | 11 |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 |
Nominal Pipe sizes in Inches | Number of bolts used | Diameter of Flange in inches | Diameter of Bolt Holes in Inches | Diameter of Bolts in Inches | Bolt Circle in Inches |
---|---|---|---|---|---|
1/4 | 4 | 3-3/8 | 0.62 | 1/2 | 2-1/4 |
1/2 | 4 | 3-1/2 | 0.62 | 1/2 | 2-3/8 |
3/4 | 4 | 3-7/8 | 0.62 | 1/2 | 2-3/4 |
1 | 4 | 4-1/4 | 0.62 | 1/2 | 3-1/8 |
1-1/4 | 4 | 4-5/8 | 0.62 | 1/2 | 3-1/2 |
1-1/2 | 4 | 5 | 0.62 | 1/2 | 3-7/8 |
2 | 4 | 6 | 0.75 | 5/8 | 4-3/4 |
2-1/2 | 4 | 7 | 0.75 | 5/8 | 5-1/2 |
3 | 4 | 7-1/2 | 0.75 | 5/8 | 6 |
3-1/2 | 8 | 8-1/2 | 0.75 | 5/8 | 7 |
4 | 8 | 9 | 0.75 | 5/8 | 7-1/2 |
5 | 8 | 10 | 0.88 | 3/4 | 8-1/2 |
6 | 8 | 11 | 0.88 | 3/4 | 9-1/2 |
8 | 8 | 13-1/2 | 0.88 | 3/4 | 11-3/4 |
10 | 12 | 16 | 1 | 7/8 | 14-1/4 |
12 | 12 | 19 | 1 | 7/8 | 17 |
14 | 12 | 21 | 1.12 | 1 | 18-3/4 |
16 | 16 | 23-1/2 | 1.12 | 1 | 21-1/4 |
18 | 16 | 25 | 1.25 | 1-1/8 | 22-3/4 |
20 | 20 | 27-1/2 | 1.25 | 1-1/8 | 25 |
24 | 20 | 32 | 1.38 | 1-1/4 | 29-1/2 |
Nominal Pipe Size in Inch | Number of Bolt used | Bolt Circle in inch | Diameter of Bolts in inch | Diameter of Flange in inch | Diameter of Bolt Holes in inch |
---|---|---|---|---|---|
1/4 | 4 | 2-1/4 | 1/2 | 3-3/8 | 0.62 |
1/2 | 4 | 2-5/8 | 1/2 | 3-3/4 | 0.62 |
3/4 | 4 | 3-1/4 | 5/8 | 4-5/8 | 0.75 |
1 | 4 | 3-1/2 | 5/8 | 4-7/8 | 0.75 |
1-1/4 | 4 | 3-7/8 | 5/8 | 5-1/4 | 0.75 |
1-1/2 | 4 | 4-1/2 | 3/4 | 6-1/8 | 0.88 |
2 | 8 | 5 | 5/8 | 6-1/2 | 0.75 |
2-1/2 | 8 | 5-7/8 | 3/4 | 7-1/2 | 0.88 |
3 | 8 | 6-5/8 | 3/4 | 8-1/4 | 0.88 |
3-1/2 | 8 | 7-1/4 | 3/4 | 9 | 0.88 |
4 | 8 | 7-7/8 | 3/4 | 10 | 0.88 |
5 | 8 | 9-1/4 | 3/4 | 11 | 0.88 |
6 | 12 | 10-5/8 | 3/4 | 12-1/2 | 0.88 |
8 | 12 | 13 | 7/8 | 15 | 1 |
10 | 16 | 15-1/4 | 1 | 17-1/2 | 1.12 |
12 | 16 | 17-3/4 | 1-1/8 | 20-1/2 | 1.25 |
14 | 20 | 20-1/4 | 1-1/8 | 23 | 1.25 |
16 | 20 | 22-1/2 | 1-1/4 | 25-1/2 | 1.38 |
18 | 24 | 24-3/4 | 1-1/4 | 28 | 1.38 |
20 | 24 | 27 | 1-1/4 | 30-1/2 | 1.38 |
24 | 24 | 32 | 1-1/2 | 36 | 1.62 |
Nominal Pipe Sizes in Inch | Diameter of Bolt Holes in inch | Number of Bolt used | Diameter of Flange in inch | Diameter of Bolts in inch | Bolt Circle in inch |
---|---|---|---|---|---|
1/4 | 0.62 | 4 | 3-3/8 | 1/2 | 2-1/4 |
1/2 | 0.62 | 4 | 3-3/4 | 1/2 | 2-5/8 |
3/4 | 0.75 | 4 | 4-5/8 | 5/8 | 3-1/4 |
1 | 0.75 | 4 | 4-7/8 | 5/8 | 3-1/2 |
1-1/4 | 0.75 | 4 | 5-1/4 | 5/8 | 3-7/8 |
1-1/2 | 0.88 | 4 | 6-1/8 | 3/4 | 4-1/2 |
2 | 0.75 | 8 | 6-1/2 | 5/8 | 5 |
2-1/2 | 0.88 | 8 | 7-1/2 | 3/4 | 5-7/8 |
3 | 0.88 | 8 | 8-1/4 | 3/4 | 6-5/8 |
3-1/2 | 1 | 8 | 9 | 7/8 | 7-1/4 |
4 | 1 | 8 | 10 | 7/8 | 7-7/8 |
5 | 1 | 8 | 11 | 7/8 | 9-1/4 |
6 | 1 | 12 | 12-1/2 | 7/8 | 10-5/8 |
8 | 1.12 | 12 | 15 | 1 | 13 |
10 | 1.25 | 16 | 17-1/2 | 1-1/8 | 15-1/4 |
12 | 1.38 | 16 | 20-1/2 | 1-1/4 | 17-3/4 |
14 | 1.38 | 20 | 23 | 1-1/4 | 20-1/4 |
16 | 1.5 | 20 | 25-1/2 | 1-3/8 | 22-1/2 |
18 | 1.5 | 24 | 28 | 1-3/8 | 24-3/4 |
20 | 1.62 | 24 | 30-1/2 | 1-1/2 | 27 |
24 | 1.88 | 24 | 36 | 1-3/4 | 32 |
Nominal Pipe Sizes in Inch | Number of Bolt Used | Bolt Circle in inch | Diameter of Bolts in inch | Diameter of Flange in inch | Diameter of Bolt Holes in inch |
---|---|---|---|---|---|
1/4 | 4 | 2-1/4 | 1/2 | 3-3/8 | 0.62 |
1/2 | 4 | 2-5/8 | 1/2 | 3-3/4 | 0.62 |
3/4 | 4 | 3-1/4 | 5/8 | 4-5/8 | 0.75 |
1 | 4 | 3-1/2 | 5/8 | 4-7/8 | 0.75 |
1-1/4 | 4 | 3-7/8 | 5/8 | 5-1/4 | 0.75 |
1-1/2 | 4 | 4-1/2 | 3/4 | 6-1/8 | 0.88 |
2 | 8 | 5 | 5/8 | 6-1/2 | 0.75 |
2-1/2 | 8 | 5-7/8 | 3/4 | 7-1/2 | 0.88 |
3 | 8 | 6-5/8 | 3/4 | 8-1/4 | 0.88 |
3-1/2 | 8 | 7-1/4 | 7/8 | 9 | 1 |
4 | 8 | 8-1/2 | 7/8 | 10-3/4 | 1 |
5 | 8 | 10-1/2 | 1 | 13 | 1.12 |
6 | 12 | 11-1/2 | 1 | 14 | 1.12 |
8 | 12 | 13-3/4 | 1-1/8 | 16-1/2 | 1.25 |
10 | 16 | 17 | 1-1/4 | 20 | 1.38 |
12 | 20 | 19-1/4 | 1-1/4 | 22 | 1.38 |
14 | 20 | 20-3/4 | 1-3/8 | 23-3/4 | 1.5 |
16 | 20 | 23-3/4 | 1-1/2 | 27 | 1.62 |
18 | 20 | 25-3/4 | 1-5/8 | 29-1/4 | 1.75 |
20 | 24 | 28-1/2 | 1-5/8 | 32 | 1.75 |
24 | 24 | 33 | 1-7/8 | 37 | 2 |
Nominal Pipe Sizes in Inch | Diameter of Flange in inch | Diameter of Bolts in inch | Bolt Circle in inch | Diameter of Bolt Holes in inch | Number of Bolt Used |
---|---|---|---|---|---|
1/2 | 4-3/4 | 3/4 | 3-1/4 | 0.88 | 4 |
3/4 | 5-1/8 | 3/4 | 3-1/2 | 0.88 | 4 |
1 | 5-7/8 | 7/8 | 4 | 1 | 4 |
1-1/4 | 6-1/4 | 7/8 | 4-3/8 | 1 | 4 |
1-1/2 | 7 | 1 | 4-7/8 | 1.12 | 4 |
2 | 8-1/2 | 7/8 | 6-1/2 | 1 | 8 |
2-1/2 | 9-5/8 | 1 | 7-1/2 | 1.12 | 8 |
3 | 9-1/2 | 7/8 | 7-1/2 | 1 | 8 |
4 | 11-1/2 | 1-1/8 | 9-1/4 | 1.25 | 8 |
5 | 13-3/4 | 1-1/4 | 11 | 1.38 | 8 |
6 | 15 | 1-1/8 | 12-1/2 | 1.25 | 12 |
8 | 18-1/2 | 1-3/8 | 15-1/2 | 1.5 | 12 |
10 | 21-1/2 | 1-3/8 | 18-1/2 | 1.5 | 16 |
12 | 24 | 1-3/8 | 21 | 1.5 | 20 |
14 | 25-1/4 | 1-1/2 | 22 | 1.62 | 20 |
16 | 27-3/4 | 1-5/8 | 24-1/2 | 1.75 | 20 |
18 | 31 | 1-7/8 | 27 | 2 | 20 |
20 | 33-3/4 | 2 | 29-1/2 | 2.12 | 20 |
24 | 41 | 2-1/2 | 35-1/2 | 2.62 | 20 |
Nominal Pipe Sizes in Inch | Diameter of Bolts in inch | Diameter of Flange in inch | Diameter of Bolt Holes in inch | Number of Bolt Used | Bolt Circle in inch |
---|---|---|---|---|---|
1/2 | 3/4 | 4-3/4 | 0.88 | 4 | 3-1/4 |
3/4 | 3/4 | 5-1/8 | 0.88 | 4 | 3-1/2 |
1 | 7/8 | 5-7/8 | 1 | 4 | 4 |
1-1/4 | 7/8 | 6-1/4 | 1 | 4 | 4-3/8 |
1-1/2 | 1 | 7 | 1.12 | 4 | 4-7/8 |
2 | 7/8 | 8-1/2 | 1 | 8 | 6-1/2 |
2-1/2 | 1 | 9-5/8 | 1.12 | 8 | 7-1/2 |
3 | 1-1/8 | 10-1/2 | 1.25 | 8 | 8 |
4 | 1-1/4 | 12-1/4 | 1.38 | 8 | 9-1/2 |
5 | 1-1/2 | 14-3/4 | 1.62 | 8 | 11-1/2 |
6 | 1-3/8 | 15-1/2 | 1.5 | 12 | 12-1/2 |
8 | 1-5/8 | 19 | 1.75 | 12 | 15-1/2 |
10 | 1-7/8 | 23 | 2 | 12 | 19 |
12 | 2 | 26-1/2 | 2.12 | 16 | 22-1/2 |
14 | 2-1/4 | 29-1/2 | 2.38 | 16 | 25 |
16 | 2-1/2 | 32-1/2 | 2.62 | 16 | 27-3/4 |
18 | 2-3/4 | 36 | 2.88 | 16 | 30-1/2 |
20 | 3 | 38-3/4 | 3.12 | 16 | 32-3/4 |
24 | 3-1/2 | 46 | 3.62 | 16 | 39 |
Nominal Pipe Sizes in Inch | Diameter of Flange in inch | Bolt Circle in inch | Diameter of Bolts in inch | Number of Bolt Used | Diameter of Bolt Holes in inch |
---|---|---|---|---|---|
1/2 | 5-1/4 | 3-1/2 | 3/4 | 4 | 0.88 |
3/4 | 5-1/2 | 3-3/4 | 3/4 | 4 | 0.88 |
1 | 6-1/4 | 4-1/4 | 7/8 | 4 | 1 |
1-1/4 | 7-1/4 | 5-1/8 | 1 | 4 | 1.12 |
1-1/2 | 8 | 5-3/4 | 1-1/8 | 4 | 1.25 |
2 | 9-1/4 | 6-3/4 | 1 | 8 | 1.12 |
2-1/2 | 10-1/2 | 7-3/4 | 1-1/8 | 8 | 1.25 |
3 | 12 | 9 | 1-1/4 | 8 | 1.38 |
4 | 14 | 10-3/4 | 1-1/2 | 8 | 1.62 |
5 | 16-1/2 | 12-3/4 | 1-3/4 | 8 | 1.88 |
6 | 19 | 14-1/2 | 2 | 8 | 2.12 |
8 | 21-3/4 | 17-1/4 | 2 | 12 | 2.12 |
10 | 26-1/2 | 21-1/4 | 2-1/2 | 12 | 2.62 |
12 | 30 | 24-3/8 | 2-3/4 | 12 | 2.88 |
Size in Inch | Size in MM | Number of Bolt | Bolt Diameter | Thread Type | Bolt Stress lb/in2 |
Torque lbf.ft. |
Torque Nm |
1/2 | 15 | 4 | ½” | UNC | 25,000 | 22 | 30 |
3/4 | 20 | 4 | ½” | UNC | 30,000 | 26 | 36 |
1 | 35 | 4 | ½” | UNC | 33,000 | 29 | 39 |
1 ½ | 40 | 4 | ½” | UNC | 50,000 | 44 | 60 |
2 | 50 | 4 | 5/8” | UNC | 50,000 | 86 | 117 |
3 | 80 | 4 | 5/8” | UNC | 50,000 | 86 | 117 |
4 | 100 | 8 | 5/8” | UNC | 40,000 | 69 | 93 |
6 | 150 | 8 | ¾” | UNC | 45,000 | 137 | 185 |
8 | 200 | 8 | ¾” | UNC | 45,000 | 137 | 185 |
10 | 250 | 12 | 7/8” | UNC | 40,000 | 194 | 263 |
12 | 300 | 12 | 7/8” | UNC | 40,000 | 194 | 263 |
14 | 350 | 12 | 1” | UN8 | 41,000 | 296 | 401 |
16 | 400 | 16 | 1” | UN8 | 40,000 | 289 | 392 |
18 | 450 | 16 | 1 1/8” | UN8 | 40,000 | 421 | 571 |
20 | 500 | 20 | 1 1/8” | UN8 | 40,000 | 421 | 571 |
24 | 600 | 20 | 1 ¼” | UN8 | 40,000 | 588 | 797 |
Temperature °F | 150 LBS | 300 LBS | 400 LBS | 600 LBS | 900 LBS | 1500 LBS | 2500 LBS |
-20 to 100 | 275 | 720 | 960 | 1440 | 2160 | 3600 | 6000 |
750 | 95 | 415 | 555 | 830 | 1245 | 2075 | 3460 |
300 | 205 | 540 | 720 | 1080 | 1620 | 2700 | 4500 |
400 | 190 | 495 | 660 | 995 | 1490 | 2485 | 4140 |
500 | 170 | 465 | 620 | 930 | 1395 | 2330 | 3880 |
600 | 140 | 435 | 580 | 875 | 1310 | 2185 | 3640 |
200 | 230 | 600 | 800 | 1200 | 1800 | 3000 | 5000 |
650 | 125 | 430 | 575 | 860 | 1290 | 2150 | 3580 |
700 | 110 | 425 | 565 | 850 | 1275 | 2125 | 3540 |
800 | 80 | 405 | 540 | 805 | 1210 | 2015 | 3360 |
850 | 65 | 395 | 530 | 790 | 1190 | 1980 | 3300 |
900 | 50 | 390 | 520 | 780 | 1165 | 1945 | 3240 |
950 | 35 | 380 | 510 | 765 | 1145 | 1910 | 3180 |
1000 | 20 | 320 | 430 | 640 | 965 | 1605 | 2675 |
1100 | 20 | 255 | 345 | 515 | 770 | 1285 | 2145 |
1150 | 20 | 200 | 265 | 400 | 595 | 995 | 1655 |
1200 | 20 | 155 | 205 | 310 | 465 | 770 | 1285 |
1250 | 20 | 115 | 150 | 225 | 340 | 565 | 945 |
1050 | 20 | 310 | 410 | 615 | 925 | 1545 | 2570 |
1300 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
1350 | 20 | 60 | 80 | 125 | 185 | 310 | 515 |
1500 | 10 | 25 | 35 | 55 | 80 | 135 | 230 |
1400 | 20 | 50 | 65 | 95 | 145 | 240 | 400 |
1450 | 15 | 35 | 45 | 70 | 105 | 170 | 285 |
Nominal pipe diameter in Inch | Outer Diameter Flange | Thickness | Diameter of Hub | Diameter of Raised Face | Length | Thread Length | KG | LB | |
---|---|---|---|---|---|---|---|---|---|
1 | 25 | 108.00 | 14.20 | 49.30 | 50.80 | 17.50 | 17.50 | 0.8 | 1.8 |
1/2 | 15 | 89.00 | 11.20 | 30.20 | 35.10 | 15.70 | 15.70 | 0.4 | 0.9 |
1-1/4 | 32 | 117.50 | 15.70 | 58.70 | 63.50 | 20.60 | 20.60 | 1.2 | 2.6 |
1-1/2 | 40 | 127.00 | 17.50 | 65.00 | 73.20 | 22.40 | 22.40 | 1.5 | 3.3 |
3/4 | 20 | 98.50 | 12.70 | 38.10 | 42.90 | 15.70 | 15.70 | 0.7 | 1.5 |
6 | 150 | 279.50 | 25.40 | 192.00 | 215.90 | 39.60 | 39.60 | 8.4 | 18.5 |
3 | 80 | 190.50 | 23.90 | 108.00 | 127.00 | 30.20 | 30.20 | 4.1 | 9 |
2-1/2 | 65 | 178.00 | 22.40 | 90.40 | 104.60 | 28.40 | 28.40 | 3.7 | 8.1 |
3-1/2 | 90 | 216.00 | 23.90 | 122.20 | 139.70 | 31.80 | 31.80 | 5.1 | 11.2 |
2 | 50 | 152.50 | 19.10 | 77.70 | 91.90 | 25.40 | 25.40 | 2.3 | 5.1 |
4 | 100 | 228.50 | 23.90 | 134.90 | 157.20 | 33.30 | 33.30 | 5.9 | 13 |
5 | 125 | 254.00 | 23.90 | 163.60 | 185.70 | 36.60 | 36.60 | 7 | 15.4 |
8 | 200 | 343.00 | 28.40 | 246.10 | 269.70 | 44.50 | 44.50 | 13 | 28.6 |
14 | 350 | 533.50 | 35.10 | 400.10 | 412.80 | 57.20 | 57.20 | 39 | 86 |
10 | 250 | 406.50 | 30.20 | 304.80 | 323.90 | 49.30 | 49.30 | 18 | 39.5 |
20 | 500 | 698.50 | 42.90 | 558.80 | 584.20 | 73.20 | 73.20 | 76 | 167 |
24 | 600 | 813.00 | 47.80 | 663.40 | 692.20 | 82.60 | 82.60 | 97 | 214 |
16 | 400 | 597.00 | 36.60 | 457.20 | 469.90 | 63.50 | 63.50 | 47 | 103 |
12 | 300 | 482.50 | 31.80 | 365.30 | 381.00 | 55.60 | 55.60 | 29 | 64 |
18 | 450 | 635.00 | 39.60 | 505.00 | 533.40 | 68.30 | 68.30 | 57 | 126 |
Nominal Pipe Size | Outside Diameter of Flanges | Thickness of Flanges | Diameter of Raised Face | Diameter of Hub at Base | Length Thru Hub | Diameter or Bore | Diameter of Hub at Bevel | Radius of Fillet | Depth of Socket | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Welding Neck | Slip-On Threaded Socket | Lap Joint | Slip-on Socket | Lap Joint | ||||||||
O | Q | R | X | Y | Y | Y | W | B | H | r | Z | |
2 | 6 | 3/4 | 3-5/8 | 3-1/16 | 2-1/2 | 1 | 1 | 2.44 | 2.46 | 2.38 | 5/16 | 11/16 |
3/4 | 3-7/8 | 1/2 | 1-11/16 | 1-1/2 | 2-1/16 | 5/8 | 5/8 | 1.09 | 1.11 | 1.05 | 1/8 | 7/16 |
1 | 4-1/4 | 9/16 | 2 | 1-15/16 | 2-3/16 | 11/16 | 11/16 | 1.36 | 1.38 | 1.32 | 1/8 | 1/2 |
1-1/4 | 4-5/8 | 5/8 | 2-1/2 | 2-5/16 | 2-1/4 | 13/16 | 13/16 | 1.70 | 1.72 | 1.66 | 3/16 | 9/16 |
1/2 | 3-1/2 | 7/16 | 1-3/8 | 1-3/16 | 1-7/8 | 5/8 | 5/8 | .88 | .90 | .84 | 1/8 | 3/8 |
1-1/2 | 5 | 11/16 | 2-7/8 | 2-9/16 | 2-7/16 | 7/8 | 7/8 | 1.95 | 1.97 | 1.90 | 1/4 | 5/8 |
2-1/2 | 7 | 7/8 | 4-1/8 | 3-9/16 | 2-3/4 | 1-1/8 | 1-1/8 | 2.94 | 2.97 | 2.88 | 5/16 | 3/4 |
3 | 7-1/2 | 15/16 | 5 | 4-1/4 | 2-3/4 | 1-3/16 | 1-3/16 | 3.57 | 3.60 | 3.50 | 3/8 | 13/16 |
3-1/2 | 8-1/2 | 15/16 | 5-1/2 | 4-13/16 | 2-13/16 | 1-1/4 | 1-1/4 | 4.07 | 4.10 | 4.00 | 3/8 | 7/8 |
4 | 9 | 15/16 | 6-3/16 | 5-5/16 | 3 | 1-5/16 | 1-5/16 | 4.57 | 4.60 | 4.50 | 7/16 | 15/16 |
6 | 11 | 1 | 8-1/2 | 7-9/16 | 3-1/2 | 1-9/16 | 1-9/16 | 6.72 | 6.75 | 6.63 | 1/2 | 1-1/16 |
8 | 13-1/2 | 1-1/8 | 10-5/8 | 9-11/16 | 4 | 1-3/4 | 1-3/4 | 8.72 | 8.75 | 8.63 | 1/2 | 1-1/4 |
10 | 16 | 1-3/16 | 12-3/4 | 12 | 4 | 1-15/16 | 1-15/16 | 10.88 | 10.92 | 10.75 | 1/2 | 1-5/16 |
12 | 19 | 1-1/4 | 15 | 14-3/8 | 4-1/2 | 2-3/16 | 2-3/16 | 12.88 | 12.92 | 12.75 | 1/2 | 1-9/16 |
14 | 21 | 1-3/8 | 16-1/4 | 15-3/4 | 5 | 2-1/4 | 3-1/8 | 14.14 | 14.18 | 14.00 | 1/2 | 1-5/8 |
5 | 10 | 15/16 | 7.5/16 | 6-7/16 | 3-1/2 | 1-7/16 | 1-7/16 | 5.66 | 5.69 | 5.56 | 7/16 | 15/16 |
16 | 23-1/2 | 1-7/16 | 18-1/2 | 18 | 5 | 2-1/2 | 3-7/16 | 16.16 | 16.19 | 16.00 | 1/2 | 1-3/4 |
18 | 25 | 1-9/16 | 21 | 19-7/8 | 5-1/2 | 2-11/16 | 3-13/16 | 18.18 | 18.20 | 18.00 | 1/2 | 1-15/16 |
24 | 32 | 1-7/8 | 27-1/4 | 26-1/8 | 6 | 3-1/4 | 4-3/8 | 24.25 | 24.25 | 24.00 | 1/2 | 2-1/2 |
20 | 27-1/2 | 1-11/16 | 23 | 22 | 5-11/16 | 2-7/8 | 4-1/16 | 20.20 | 20.25 | 20.00 | 1/2 | 2-1/8 |
Grade | Carbon | Manganese | Silicon | Phosphorus | Sulfur | Chromium | Molybdenum | Nickel | Nitrogen |
---|---|---|---|---|---|---|---|---|---|
SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | - | 8 – 11 | - |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
---|---|---|---|---|
8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 30000 , MPa – 205 | Psi – 75000 , MPa – 515 | 35 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | AFNOR | BS | EN |
---|---|---|---|---|---|---|---|
SS 304 | 1.4301 | S30400 | SUS 304 | 08Х18Н10 | Z7CN18‐09 | 304S31 | X5CrNi18-10 |
Products | We supplied to following Locations |
---|---|
6 Inch Aisi 304 Stainless Steel Flanges | France, Thailand, Europe, Qatar |
Stainless Steel 304 Forged Weld Neck Flanges | United Arab Emirates (UAE), Norway, Malaysia, Turkey |
150# Slip-on 10 inch Rf Pipe Flanges Stainless Steel 304 | Dammam -KSA, Indonesia, Belgium, Philippines. |
Dn 32 125 150 Flat Ss 304 Inch Reducing Raised Face Stainless Steel Flanges | Canada, Singapore, Malaysia, Philippines |
Spectacle Blind Flanges 300# 4 inch Stainless Steel 304 | Japan, Europe, Romania, Malaysia |
Ss 304 Welding Neck Orifice Flanges | Colombia, Malaysia, Sweden, China |
Jis 10k Blind Flanges Ff Stainless Steel 304 | Dubai, Netherlands, Russia, Malaysia |
Decoration 304 Stainless Steel Plate Covers Flanges | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
2inch 304 Stainless Steel Cf 4-way Cross Flanges | Philippines, Nigeria, Australia, UK |
Stainless Steel 304 Kf16 Flanges To 12.7mm | Oman, Malaysia, Hong Kong, UAE |
Ansi Standard 304 Stainless Steel Rtj Flanges | South Africa, Bahrain, Singapore |
8 Inch 304 Stainless Steel Blind Flanges | Germany, Czechia, Malaysia, Thailand |
304 Class 150 Sch10s Schedule 40 Slip On Stainless Steel Flanges | Finland, Malaysia, USA, Bangladesh |
Stainless Steel Ansi 304 Flange So/wn/blind Flange | Italy, Iran, Chile, Singapore |
Stainless Steel 304 Pipe Flange | Egypt, Spain, UK, Mexico |
Stainless Steel 304 Pn10 Pn16 Flat Flanges | Ellington -United States, Poland, Canada, UK |
Forged Stainless Steel Flanges 304 | United Kingdom -UK, Europe, UAE, Malaysia |