Grade B6 refers to martensitic stainless steel alloy grade 410. Like most alloys that have a martensitic microstructure, which gives the ASTM A193 Grade B6 a good toughness and hardness value, in a heat treated condition. If heat treatment is not performed on stainless steel alloys like grade 410, they become brittle and experience failure in applications. As a base alloy, the use of ASTM A193 Grade B6 Bolts is prominent in the field of engineering, simply because of their toughness and good mechanical properties.
Though the corrosion resistance properties of this class aren’t as that of austenitic stainless steel, they nonetheless, perform admirably in applications that demand high strength. With 12% chromium in its chemistry, Sa193 Gr B6 Bolts work well in industries like ore extraction, oil and gas, and in the processing of sugar. Because of the substantial content of chromium in their alloy, these fasteners are suited to environments that experience oxidation. The rate of oxidation is inversely proportional to the increase in temperature. This means if the temperature in the application were to increase, the alloys present there would undergo rapid decay. The ASTM A193 B6 Stainless Steel Studs Bolt was produced to deliver a good performance in high temperature environments. In such applications, it is possible to use the fasteners up to a temperature of 1292°F, without the alloy giving in to corrosion. As a martensitic grade, it is possible to use treatments like tempering, hardening, and stress relieving to achieve the optimum level of hardness in the A193 B6 Stainless Steel Studs. Moreover, heat treatments offer the alloy other benefits including better dimensional stability, good mechanical strength, and durability.
Dimensions | ASME B18.2.1, B18.3 |
---|---|
Standard | ASTM A193 B6/ ASME SB193 B6 |
Melt Origin | Korea, Japan, South America, East Europe |
Mandatory Requirements | Free from Radioactive Contaminationand Mercury |
Certification | Dual Certified As per ASTM and ASME Standards |
Additional Requirements | NACE MR0103 / ISO 15156 Compliance / MR0175 |
Threads Configuration | B1.1 2A or 3A Inch Unified Threads B1.13M 6h Metric Coarse Threads |
Supplier and Distributors Located in | Gurgaon, Kolkata, Ernakulam, Ludhiana, Rajkot, Courbevoie, Kuwait, Janeiro, Bengaluru, Surat, Jamshedpur, Ankara, Tau, Calgary, Abu Dhabi, Ludhiana, Port of Spain, Gujarat, Mumbai, Khobar, Melbourne, Gimhae si, Bogota, London, Bangalore, Indore, Kanpur, Thiruvananthapuram, Muscat, Dammam, Montreal, Ahvaz, Istanbul, Perth, Manama, Vadodara, India, Riyadh, Ranchi, Santiago, Karachi, Howrah, Tehran, Caracas, Nagpur, Ahmedabad, Pimpri Chinchwad, Lagos, Sydney, Mexico, Noida, New Delhi, Coimbatore, Hyderabad, Chennai, Baroda |
Astm A193 Grade B6 Bolts
A193 B6 Stainless Steel Hex Bolts
Sa 193 B6 Heavy Hex Bolts
Asme Sa 193 B6 Flange Bolts
Astm A193 Gr B6 Carriage Bolt
A193 B6 Bolt
Astm A193 Grade B6 Hex Nuts
Sa 193 B6 Nyloc Nuts
Asme Sa 193 B6 Lock Nut
A193 B6 Self Locking Nuts
A193 B6 Stainless Steel Flange Nuts
ASTM A193 B6 Stainless Steel Nut
ASTM A193 Grade B6 Threaded Rod
ASME SA 193 B6 Studs
A193 B6 Double Ended Studs
Sa 193 B6 Fully Threaded Studs
Astm A193 Grade B6 Unc Stud Bolt
Sa 193 B6 Stud Bolts
ASTM A193 Grade B6 Socket Head Cap Screws
A193 B6 Self Tapping Screws
ASME SA 193 B6 Set Screw
Astm A193 Gr B6 Cap Screw
Sa 193 B6 Coach Screws
ASTM A193 B6 Stainless Steel Screws
A193 B6 Flat Washer
Astm A193 Grade B6 Fender Washer
Sa 193 B6 Belleville Washer
A193 B6 Stainless Steel Washer
ASTM A193 Grade B6 Spring Washer
Sa 193 B6 Lock Washer
Carbon | Manganese | Phosphorus | Sulfur | Chromium | Silicon |
---|---|---|---|---|---|
0.08 To 0.15 | 1 | 0.040 | 11.5 To 13.5 | 0.030 | 1 |
Diameter in inch | Tensile Strength | Yield Strength | Elongation | Reduction | Hardness | |
---|---|---|---|---|---|---|
HBW | HRC | |||||
4 | 100 | 80 | 16 | 50 | 321 | 35 |
ASTM | AISI | UNS |
---|---|---|
ASTM A193 GRADE B6 | 410 | 41000 |
The use of ASTM A193 Grade B6 Bolts is prominent in those applications that have the need for characteristics such as mild resistance to corrosion, heat resistance as well as high strength. The Asme Sa 193 B6 fasteners are magnetic in both annealed condition as well as heat treated condition.
Description | Price Per Piece in INR | Price Per Piece in USA $ | Price Per Piece in UAE Dirham |
---|---|---|---|
ASTM 193 B6 HEX BOLT | INR 25.94 | USA $ 0.35 | AED 1.29 |
AStm carbon steel galvanized stud bolt astm a193 gr b6 | INR 3.71 | USA $ 0.05 | AED 0.18 |
astm a193 gr b6 zinc plated with nut | INR 97.81 | USA $ 1.32 | AED 4.85 |
DIN912 ASTM A193 B6 B7M Allen cup Head or Hex Socket Head Bolt | INR 7.41 | USA $ 0.10 | AED 0.37 |
ASTM A193 B6 heavy hex bolts and nuts | INR 0.74 | USA $ 0.01 | AED 0.037 |
Diameter | Torque Feet/Lbs | ||
30% | 70% | 100% | |
9/16 | 23 | 53 | 75 |
1/2 | 16 | 36 | 52 |
5/8 | 31 | 73 | 104 |
7/8 | 71 | 166 | 237 |
3/4 | 55 | 129 | 184 |
1 | 107 | 249 | 356 |
1.1/4 | 179 | 417 | 596 |
1.1/8 | 127 | 297 | 424 |
1.3/8 | 186 | 435 | 622 |
1.9/16 | 168 | 392 | 560 |
1.1/2 | 246 | 574 | 821 |
1.5/8 | 191 | 445 | 636 |
1.7/8 | 298 | 696 | 994 |
1.3/4 | 240 | 561 | 801 |
2 | 366 | 853 | 1219 |
3 | 1289 | 3008 | 4297 |
2.1/2 | 733 | 1709 | 2442 |
2.1/4 | 529 | 1234 | 1762 |
2.3/4 | 986 | 2300 | 3285 |
Diameter | Diameter in mm | Diameter in inch | Nut Sizes |
---|---|---|---|
M12 | 12 | 0.4724 | 19 |
M10 | 10 | 0.3937 | 17 |
M14 | 14 | 0.5512 | 22 |
M18 | 18 | 0.7087 | 27 |
M16 | 16 | 0.6299 | 24 |
M20 | 20 | 0.7874 | 30 |
M24 | 24 | 0.9449 | 36 |
M22 | 22 | 0.8661 | 32 |
M27 | 27 | 1.063 | 41 |
M33 | 33 | 1.2992 | 50 |
M30 | 30 | 1.1811 | 46 |
M36 | 36 | 1.4173 | 55 |
M42 | 42 | 1.6535 | 65 |
M39 | 39 | 1.5354 | 60 |
M45 | 45 | 1.7717 | 70 |
M52 | 52 | 2.0472 | 80 |
M48 | 48 | 1.8898 | 75 |
M56 | 56 | 2.2047 | 85 |
M64 | 64 | 2.5197 | 95 |
M60 | 60 | 2.3622 | 90 |
M68 | 68 | 2.6772 | 100 |
M76 | 76 | 2.9921 | 110 |
M72 | 72 | 2.8346 | 105 |
M80 | 80 | 3.1496 | 115 |
M90 | 90 | 3.5433 | 130 |
M85 | 85 | 3.3464 | 120 |
M100 | 100 | 3.937 | 145 |
M160 | 160 | 6.2992 | 230 |
M125 | 125 | 4.9212 | 180 |
M110 | 110 | 4.3307 | 155 |
M140 | 140 | 5.5118 | 200 |
Sizes | Weight per Metre | Size (UNC) | Weight per Meter |
---|---|---|---|
M2 | 0.0187 | ||
M2.5 | 0.030 | ||
M3 | 0.044 | ||
M3.5 | 0.060 | ||
M4 | 0.078 | ||
M5 | 0.124 | ||
M6 | 0.177 | ¼ | 0.194 |
M8 | 0.319 | 5/16 | 0.323 |
M10 | 0.500 | 3/8 | 0.469 |
7/16 | 0.650 | ||
M12 | 0.725 | ½ | 0.896 |
M14 | 0.970 | 9/16 | 1.096 |
M16 | 1.330 | 5/8 | 1.342 |
M18 | 1.650 | ||
M20 | 2.080 | ¾ | 2.021 |
M22 | 2.540 | 7/8 | 2.756 |
M24 | 3.000 | 1 | 3.638 |
M27 | 3.850 | 1 1/8 | 4.545 |
M30 | 4.750 | 1 ¼ | 5.718 |
M33 | 5.900 | 1 3/8 | 6.842 |
M36 | 6.900 | 1 ½ | 8.281 |
M39 | 8.200 | 1 5/8 | 9.726 |
M42 | 9.400 | 1 ¾ | 11.231 |
M45 | 11.000 | 1 7/8 | 13.038 |
M48 | 12.400 | 2 | 14.741 |
Nominal Size | F | G | H | ||||||
Width Across Flats | Width Across Corners | Thickness | |||||||
Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | |||
1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
Sample Packing
Bubble Wrap Packing
Box Packing
Sizes | USS | SAE | ||||
Outer Diameter | Inner Diameter | Thickness | Outer Diameter | Inner Diameter | Thickness | |
1/8 (#6) | 0.375 | 0.156 | .036/.065 | |||
5/32 (#8) | 0.438 | 0.188 | .036/.065 | |||
3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
7/32 (#12) | 0.562 | 0.250 | .051/.080 | |||
1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
1 5/8 | 3.750 | 1.750 | .153/.213 | |||
1 3/4 | 4.000 | 1.875 | .153/.213 | |||
1 7/8 | 4.250 | 2.000 | .153/.213 | |||
2 | 4.500 | 2.125 | .153/.213 | |||
2 1/4 | 4.750 | 2.375 | .320/.248 | |||
2 1/2 | 5.000 | 2.625 | .210/.280 | |||
2 3/4 | 5.250 | 2.875 | .228/.410S | |||
3 | 5.500 | 3.125 | .249/.327 |
Products | We supplied to following Locations |
---|---|
ASTM 193 B6 HEX BOLT | Bahrain, South Africa, Singapore |
ASTM carbon steel galvanized stud bolt astm a193 gr b6 | Thailand, France, Europe, Qatar |
astm a193 gr b16 zinc plated with nut | Philippines, Australia, Nigeria, UK |
DIN912 ASTM A193 B6 Allen cup Head or Hex Socket Head Bolt | Hong Kong, Oman, Malaysia, UAE |
ASTM A193 B6 heavy hex bolts and nuts | Malaysia, USA, Finland, Bangladesh |
astm a193 b6 stud bolt | Chile, Italy, Iran, Singapore |
ferritic steel B6 stud bolt ASTM A193 | Norway, Malaysia, United Arab Emirates, Turkey |
GB 4.8 grade astm a193 b6 stud bolts | Indonesia, Belgium, Dammam -KSA, Philippines. |
HIGH TENSILE ASTM A193 B6 WING NUTS | Malaysia, Philippines, Canada, Singapore |
stud bolt astm a193 gr b6 stud bolt and nut | UK, Mexico, Egypt, Spain |
ASTM A193 B6 Alloy Steel Hex Bolt Full Threaded Rod | Poland, Canada, Ellington -United States, UK |
astm A193 B6 hexagon stud bolts with Nut | Europe, UAE, United Kingdom -UK, Malaysia |
ASTM A193 grade B6 M16x100 stud bolts | Malaysia, Japan, Europe, Romania |
ASTM A193 B6 B16 8.8 PIEE coating stud bolt | Czechia, Malaysia, Germany, Thailand |
carbon steel stud bolt astm a193 gr b6 zinc plated with nut | Sweden, China, Colombia, Malaysia |
ASTM A193 B6 Hexagon head Bolt | Netherlands, Russia, Dubai, Malaysia |
Astm a193 grade b6 transit wheel stud bolt | Saudi Arabia, Kuwait, South Africa, Brazil |