SS 304 Hex Bolt and UNS S30403 Threaded Rod Manufacturer in India
The success of an application does not only depend on its toughness and corrosion resistance properties, but also on its cost. Considered to be one of the most economical grades around, using Stainless Steel 304 Bolts and Nuts will reduce the overall cost of the entire application, without putting a dent in your pocket. It is also known as 18-8, a derivation of its chemical composition. So the UNS S30403 Threaded Rod contains about 18% chromium with 8% nickel, thereby making it one of the most economical solutions around the market for general purposes applications.
In an annealed condition the alloy is not magnetic. However, practices like cold working or welding the UNS S30403 Nut Bolt give it magnetic properties. Compared to most alloy steels, the high content of chromium gives it good resistance to corrosion. In particular, when in an oxidizing environment, that contains nitric acid whose concentration is 55%, the Type 304 Stainless Steel Fasteners could be used to a temperature of about 176°F. The alloy has good resistance to acetic acid. Acetic acid is an organic acid found in food that is moderately aggressive. Similar to acetic acid, the other acidic compounds or even alkali found in food do not affect the SS 304 Hex Bolt, when used to fasten or assemble equipment in the food industry. This alloy is adversely affected by both chlorides and sulfuric acid, which is why it is not possible for these fasteners in highly reducing environments. While it is easy to weld grade 304, there is a risk of sensitization at grain boundary by carbide precipitate. Preventing the formation of carbide precipitates is possible by reducing the content of carbon in the alloy. The low carbon grade is indicated with an L in the term. These alloys often experience a loss in tensile properties, which can be balanced by including nitrogen in the alloy of Stainless Steel 304L Stud Bolts.
Do not forget to compare our price with other Type 304 Stainless Steel Fasteners in Mumbai, Check UNS S30400 Bolt Price list
Table of Contents
- Stainless Steel 304 Bolts and Nuts Specification Format
- Ss 304 Fasteners Price List
- Stainless Steel 304 Fasteners Quality and Test reports
- Most Famous Types Of UNS S30403 Threaded Rod
- 304 SS Screw Head Drive Types
- Chemical Formula of Type 304 Stainless Steel Fasteners
- UNS S30400 Bolt Mechanical Properties Chart
- Stainless Steel 304L Stud Bolts Equivalent Material
- SS 304 Nut Thread Types
- Torque Chart of SS 304 Hex Bolt
- Stainless Steel 304 Threaded Rod threads type
- Stainless Steel 304L Bolts Size chart
- 304 Stainless Steel Hex Bolt dimension
- SS 304 Hex Nut Dimension Table
- Stainless Steel 304 Fasteners Dimension Chart
- SS 304 Threaded Rod grade markings
- Different SS 304 bolt head styles
- Stainless Steel 304 fasteners Hs Code
- Ss 304 Bolt Surface Finish
- UNS S30403 Fasteners Application
Stainless Steel 304 Bolts and Nuts Specification Format
PED approved Stainless Steel 304 Fasteners manufacturer in India, Check UNS S30403 Nut Bolt Specification and Dimension Chart
| Stainless Steel Grades | SS 304 | Stainless Steel 304 Fasteners Specifications | ASTM A193 / A193, ASME SA193 / SA194 |
| Standard | ASTM, DIN, BS |
| Length | 3 - 200 MM |
| 304 Stainless Steel Nuts Sizes | M3 - M56 3/6 inch to 2 Inch |
| SS 304 Bolt / Screw Sizes | M3 - M56 3/6 inch to 2 Inch |
| 304 Stainless Steel Screws Sizes | M1.6 To M12 |
| 304 SS Washers Sizes | M3 - M56 3/6 inch to 2 inch |
Ss 304 Fasteners Price List
| Description | Price Per Piece in INR | Price Per Piece in USA $ | Price Per Piece in UAE Dirham |
|---|---|---|---|
| DIN933 SS304 M48 Stainless Steel Hexagon Fit Bolts and Fasteners | INR 11.18 | USA $ 0.15 | AED 0.55 |
| DIN933 A2 SS 304 316 Stainless Steel Hex Bolt | INR 22.36 | USA $ 0.30 | AED 1.10 |
| Stainless Steel 304 316 Eye Self Tapping Screw | INR 7.45 | USA $ 0.10 | AED 0.37 |
| High Precision SS 304 Stainless Steel Half Thread Hex Bolts | INR 11.18 | USA $ 0.15 | AED 0.55 |
| Stainless Steel 304 Hexagon Socket cup Head Screw | INR 2.24 | USA $ 0.03 | AED 0.11 |
Stainless Steel 304 Fasteners Quality and Test reports
- Third Party Inspection
- EN 10204/3.1B
- Raw Materials Certificate
- 100% Radiography Test
- Mill test
Most Famous Types Of UNS S30403 Threaded Rod
SUS 304 Stainless Steel Wire Thread Insert Coil Insert Screw Fasteners
din 965 stainless steel 304 cross flat head screw fastener
stainless steel DIN 315 butterfly wing nut bolt fastener
304 Customized Stainless Steel U Bolt
DIN933 304 Stainless Steel Hex Bolts M12
M4 Stainless Steel 304 Set Screws
DIN931 A2 A4 Stainless Steel 304 hex head bolts
DIN938 304 Stainless Steel Double Thread Rods
304 Material Full Thread Hex Nuts Bolts
Custom Stainless Steel SS304 Hex Bolt And Nuts
DIN975 DIN976 ss fastener 304 stainless steel threaded rods
Stainless Steel 304 A4-80 DIN835 Double Head Stud
304 SS Screw Head Drive Types
Chemical Formula of Type 304 Stainless Steel Fasteners
| Grade | Carbon | Manganese | Silicon | Phosphorus | Sulfur | Chromium | Molybdenum | Nickel | Nitrogen |
| Stainless Steel 304 | - 0.08 | - 2.0 | - 0.75 | - 0.045 | - 0.030 | 18.0 20.0 | - | 8.0 10.5 | - 0.10 |
UNS S30400 Bolt Mechanical Properties Chart
| Grade | Elongation | Yield Strength | Tensile Strength | Hardness | |
| Rockwell | Brine | ||||
| Stainless Steel 304 | 40 | 205 | 515 | 92 | 201 |
Stainless Steel 304L Stud Bolts Equivalent Material
Manufacturer and supplier of 304L Ultra Coated Stainless Steel Fasteners in India, Buy SS 304 Bolt at best price, View UNS S30403 Threaded Rod Weight Chart
| Grade | UNS | ss Notation | JIS | EN/DIN | EN/DIN Equivalent |
| AISI 304 | UNS S30400 | SS 304 | SUS304 | EN 1.4301 | X4CrNi18-10 |
SS 304 Nut Thread Types
Torque Chart of SS 304 Hex Bolt
| Diameter | Torque Feet/Lbs | ||
| 30% | 70% | 100% | |
| 9/16 | 23 | 53 | 75 |
| 1/2 | 16 | 36 | 52 |
| 5/8 | 31 | 73 | 104 |
| 7/8 | 71 | 166 | 237 |
| 3/4 | 55 | 129 | 184 |
| 1 | 107 | 249 | 356 |
| 1.1/4 | 179 | 417 | 596 |
| 1.1/8 | 127 | 297 | 424 |
| 1.3/8 | 186 | 435 | 622 |
| 1.9/16 | 168 | 392 | 560 |
| 1.1/2 | 246 | 574 | 821 |
| 1.5/8 | 191 | 445 | 636 |
| 1.7/8 | 298 | 696 | 994 |
| 1.3/4 | 240 | 561 | 801 |
| 2 | 366 | 853 | 1219 |
| 3 | 1289 | 3008 | 4297 |
| 2.1/2 | 733 | 1709 | 2442 |
| 2.1/4 | 529 | 1234 | 1762 |
| 2.3/4 | 986 | 2300 | 3285 |
Stainless Steel 304 Threaded Rod threads type
- Right Hand
- Left Hand
Stainless Steel 304L Bolts Size chart
| Diameter | Diameter in mm | Diameter in inch | Nut Sizes |
|---|---|---|---|
| M12 | 12 | 0.4724 | 19 |
| M10 | 10 | 0.3937 | 17 |
| M14 | 14 | 0.5512 | 22 |
| M18 | 18 | 0.7087 | 27 |
| M16 | 16 | 0.6299 | 24 |
| M20 | 20 | 0.7874 | 30 |
| M24 | 24 | 0.9449 | 36 |
| M22 | 22 | 0.8661 | 32 |
| M27 | 27 | 1.063 | 41 |
| M33 | 33 | 1.2992 | 50 |
| M30 | 30 | 1.1811 | 46 |
| M36 | 36 | 1.4173 | 55 |
| M42 | 42 | 1.6535 | 65 |
| M39 | 39 | 1.5354 | 60 |
| M45 | 45 | 1.7717 | 70 |
| M52 | 52 | 2.0472 | 80 |
| M48 | 48 | 1.8898 | 75 |
| M56 | 56 | 2.2047 | 85 |
| M64 | 64 | 2.5197 | 95 |
| M60 | 60 | 2.3622 | 90 |
| M68 | 68 | 2.6772 | 100 |
| M76 | 76 | 2.9921 | 110 |
| M72 | 72 | 2.8346 | 105 |
| M80 | 80 | 3.1496 | 115 |
| M90 | 90 | 3.5433 | 130 |
| M85 | 85 | 3.3464 | 120 |
| M100 | 100 | 3.937 | 145 |
| M160 | 160 | 6.2992 | 230 |
| M125 | 125 | 4.9212 | 180 |
| M110 | 110 | 4.3307 | 155 |
| M140 | 140 | 5.5118 | 200 |
304 Stainless Steel Hex Bolt dimension
Never forget to compare our price with other SS 304 Bolts suppliers, best quality and lowest price of 304L Stainless Steel Threaded Rod & UNS S30403 Bolt
| Nominal Size | F | G | H | ||||||
| Width Across Flats | Width Across Corners | Thickness | |||||||
| Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | |||
| 1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
| 3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
| 5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
| 7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
| 9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
| 1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
| 5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
| 7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
| 3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
| 1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
| 1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
| 1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
| 1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
| 1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
| 1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
| 2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
| 2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
| 2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
| 2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
SS 304 Hex Nut Dimension Table
| Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
| Width Across Flats | Width Across Corners | Thickness | |||||||
| Basic | Max | Min | Max | Min | Basic | Max | Min | ||
| 1/4 | .2500 | 1/2 | .500 | .488 | .577 | .556 | 15/64 | .250 | .218 |
| 5/16 | .3125 | 9/16 | .562 | .546 | .650 | .622 | 19/64 | .314 | .280 |
| 3/8 | .3750 | 11/16 | .688 | .669 | .794 | .763 | 23/64 | .377 | .341 |
| 7/16 | .4375 | 3/4 | .750 | .728 | .866 | .830 | 27/64 | .441 | .403 |
| 1/2 | .5000 | 7/8 | .875 | .850 | 1.010 | .969 | 31/64 | .504 | .464 |
| 9/16 | .5625 | 15/16 | .938 | .909 | 1.083 | 1.037 | 35/64 | .568 | .526 |
| 5/8 | .6250 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 39/64 | .631 | .587 |
| 3/4 | .7500 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.382 | 47/64 | .758 | .710 |
| 7/8 | .8750 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 55/64 | .885 | .833 |
| 1 | 1.0000 | 1-5/8 | 1.325 | 1.575 | 1.876 | 1.796 | 63/64 | 1.012 | .956 |
| 1-1/8 | 1.1250 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 1-7/64 | 1.139 | 1.079 |
| 1-1/4 | 1.2500 | 2 | 2.000 | 1.938 | 2.309 | 2.209 | 1-7/32 | 1.251 | 1.187 |
| 1-3/8 | 1.3750 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 1-11/32 | 1.378 | 1.460 |
| 1-1/2 | 1.5000 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1-15/32 | 1.505 | 1.433 |
| 1-5/8 | 1.6250 | 2-9/16 | 2.562 | 2.481 | 2.959 | 2.828 | 1-19/32 | 1.632 | 1.556 |
| 1-3/4 | 1.7500 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-23/32 | 1.759 | 1.679 |
| 2 | 2.0000 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-31/32 | 2.013 | 1.925 |
| 2-1/4 | 2.2500 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 2-13/64 | 2.251 | 2.155 |
| 2-1/2 | 2.5000 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 2-29/64 | 2.505 | 2.401 |
| 2-3/4 | 2.7500 | 4-1/4 | 4.250 | 4.112 | 4.907 | 4.688 | 2-45/64 | 2.759 | 2.647 |
| 3 | 3.0000 | 4-5/8 | 4.625 | 4.475 | 5.340 | 5.102 | 2-61/64 | 3.013 | 2.893 |
| 3-1/4 | 3.2500 | 5 | 5.000 | 4.838 | 5.774 | 5.515 | 3-3/16 | 3.252 | 3.124 |
| 3-1/2 | 3.5000 | 5-3/8 | 5.375 | 5.200 | 6.207 | 5.928 | 3-7/16 | 3.506 | 3.370 |
| 3-3/4 | 3.7500 | 5-3/4 | 5.750 | 5.562 | 6.640 | 6.341 | 3-11/16 | 3.670 | 3.616 |
| 4 | 4.0000 | 6-1/8 | 6.125 | 5.925 | 7.073 | 6.755 | 3-15/16 | 4.014 | 3.862 |
Stainless Steel 304 Fasteners Dimension Chart
SS 304 Threaded Rod grade markings
- Brinell Hardness Number
- Supplier and Manufacturer’s Name
- Grade
- Heat Code
- ASTM Specification
- Nominal Diameter
Different SS 304 bolt head styles
Stainless Steel 304 fasteners Hs Code
| Description | HSN Code |
|---|---|
| Stainless Steel 304 fasteners | 73181500 |
Ss 304 Bolt Surface Finish
- Cadmium
- Sherardized
- Plated zinc-nickel
- Zinc Alluminium Flake Coating
- Manganese Phosphate
- Zinc Electro Plating
- Ptfe Coated Silicon Bronze Bolts
- Dacroment
- Bright Zinc Plated
- Teflon
- Zinc Phosphat
- Anodizing
- Self-Colour
- Nickel plated
- Xylon
- Phosphate
- Geometry
UNS S30403 Fasteners Application
- Chemicals
- Sea Water Equipment
- Petrochemicals
- Aircraft Exhaust
- Power Generation
- Oil Drilling Companies
- Pharmaceuticals
- Gas Processing
- Heat Exchangers