While grade 304 is very economical, some applications demand higher corrosion resistance properties. In these instances, the use of grade 316 is highly recommended because they deliver a good performance. Generally, any Stainless Steel Stud Bolts manufacturer in India suggests using this grade because it has excellent resistance to marine environments. The high concentration of salt in water is a cause for application failure, for ordinary steel alloys, because they lack the strength to withstand such corrosive solutions.
Unlike grade 304, which only contains chromium and nickel, grade 316 Ss Stud Bolts contains molybdenum as well. The inclusion of molybdenum in this alloy enhances its resistance to marine water, making it an ideal fastener grade to work in environments with a high concentration of salt. Moreover, the oxidation resistance of this alloy is also outstanding. Like most stainless steel alloys that contain more than 12% of chromium in their alloys, the passivating oxide layer formed on the M16 Stainless Steel Stud Bolts prevents the fasteners from getting corroded. Pitting and crevice corrosion are other forms of decay, that affect ordinary alloys. Since this grade contains some amount of molybdenum included in its chemistry, the fasteners do not give in to such corrosion. Hence, the Double End Threaded Studs can be used in environments that contain chloride ions without them becoming susceptible to either corrosion by pitting or crevice corrosion. The alloy also has good resistance to acids and alkalis present in food, which makes the Asme B 16.5 Stud Bolt an ideal fastener in the dairy, pharma, and food and beverage industry. The alloy is also easily weldable, with no requirement for a post welding annealing treatment to be carried out, if the weld sections are thin.
Manufacturing Process | Cold Heading, Insert tapping, Wire Drawing, Surface Plating, Heat Treatment, Inspection, Packing |
---|---|
Head | Square, Hex, Hex flange, Round, T-head, Flat & Triangular etc |
Neck type | Square, Hex, Oval, Triangular & Knurled etc |
Dimensions | ASME B18.3 / B18.2.1 |
Supplier and Distributors Located in | Courbevoie, Gurgaon, Noida, Howrah, London, Gimhae si, Gujarat, Ernakulam, Ahmedabad, Hyderabad, Bengaluru, Tehran, New Delhi, Vadodara, Coimbatore, Baroda, Indore, Thiruvananthapuram, Port of Spain, Santiago, Ankara, Manama, Janeiro, Istanbul, Ranchi, Bogota, Pimpri Chinchwad, Ludhiana, Mumbai, Lagos, Mexico, Surat, Abu Dhabi, Sydney, Riyadh, Ahvaz, Bangalore, Dammam, Khobar, Rajkot, Calgary, Kuwait, Ludhiana, Karachi, India, Chennai, Nagpur, Kolkata, Muscat, Montreal, Jamshedpur, Melbourne, Kanpur, Caracas, Perth |
Many stainless steel Stud Bolts dealers, supplier, importers, exporters, distributors Purchase Double End Threaded Studs from us and supply in their own countries with higher rates, so contact us directly and check our updated price list online.
M12X1.50 Wheel Stud Bolt and Nut
Stainless Steel Wheel Stud Bolt
grade 10.9 m10 Galvanized stud bolt
High tensile custom sizes stud bolt
20 x P1.5/P1.25 Stainless Steel Stud Bolt
M12 M16 M20 High Strength Stainless Steel A193 B8 Stud Bolt
ASTM A193 Grade B7 thread stud bolt
High quality duplex 2205 stainless steel stud bolt
ASTM A193 B8 Stainless Steel 304 A2-70 Stud Bolt M16
M14*1.5 steel wheel stud bolt
High strength ASTM A193 Gr B7 L7 double end stud bolt
Gr5 Titanium Wheel Stud bolts
Description | Price Per Piece in INR | Price Per Piece in USA $ | Price Per Piece in UAE Dirham |
---|---|---|---|
18-8 stainless steel threaded rod ends all thread stud bolt | INR 7.41 | USA $ 0.10 | AED 3.67 |
M5 M6 M10 SS 304 Stainless Steel A2-70 A2-80 Stud Bolt DIN976 | INR 7.41 | USA $ 0.10 | AED 3.67 |
5/8 3/4 Inch Double Thread Black A193 B8 B8M Threaded Rods Stud Bolt | INR 12.60 | USA $ 0.17 | AED 0.62 |
M6 M8 M10 M12 M20 steel double end stud bolt | INR 8.89 | USA $ 0.12 | AED 0.44 |
stainless steel full thread stud bolt | INR 11.12 | USA $ 0.15 | AED 0.55 |
Length in inches | 1/2 | 5/8 | 3/4 | 7/8 | 1 | 1 1/8 | 1 1/4 | 1.3/8 | 1 1/2 | 1.5/8 | 1.3/4 | 1 7/8 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
2.3/4 | 11.6 | 19.8 | ||||||||||
3.1/4 | 12.4 | 21 | 32.4 | |||||||||
2.1/2 | 10.8 | |||||||||||
3.1/2 | 13.2 | 22.2 | 34.3 | 50 | ||||||||
4.1/2 | 14.8 | 24.6 | 38.1 | 55.2 | 75.2 | 102 | ||||||
4.3/4 | 15.6 | 25.8 | 40 | 57.8 | 78.6 | 106 | 137 | |||||
4 | 14 | 23.4 | 36.2 | 52.6 | 71.8 | |||||||
5 | 16.4 | 27 | 41.9 | 60.4 | 82 | 111 | 142 | 179 | ||||
6 | 18 | 29.4 | 45.7 | 65.6 | 88.8 | 119 | 153 | 193 | 242 | 289 | ||
6.1/4 | 18.8 | 30.6 | 47.6 | 68.2 | 92.2 | 123 | 158 | 200 | 250 | 298 | 263 | |
6.1/2 | 19.6 | 32.3 | 49.5 | 70.8 | 95.6 | 128 | 164 | 206 | 258 | 308 | 374 | 437 |
5.1/2 | 17.2 | 28.2 | 43.8 | 63 | 85.4 | 115 | 147 | 186 | 234 | |||
7 | 20.4 | 33.5 | 50.8 | 73.4 | 99 | 132 | 169 | 213 | 266 | 317 | 385 | 449 |
10/1.4 | 93.3 | 125 | 166 | 212 | 267 | 332 | 391 | 474 | 551 | |||
8 | 22 | 36.1 | 54.5 | 78 | 106 | 141 | 180 | 226 | 283 | 336 | 407 | 475 |
8.1/4 | 37.3 | 56.3 | 80.5 | 108 | 145 | 185 | 233 | 291 | 345 | 418 | 488 | |
8.3/4 | 38.6 | 58.1 | 83.1 | 112 | 149 | 191 | 240 | 299 | 354 | 429 | 500 | |
9 | 39.8 | 60 | 85.6 | 115 | 153 | 196 | 246 | 307 | 364 | 440 | 513 | |
7.1/2 | 21.2 | 34.8 | 52.7 | 75.5 | 103 | 136 | 174 | 220 | 275 | 326 | 396 | 462 |
9.1/2 | 41.1 | 61.8 | 88.2 | 118 | 158 | 201 | 253 | 316 | 373 | 451 | 526 | |
10 | 63.7 | 90.7 | 122 | 162 | 206 | 260 | 324 | 382 | 463 | 538 | ||
1.0.1/2 | 128 | 171 | 217 | 273 | 340 | 401 | 485 | 564 | ||||
12 | 138 | 184 | 233 | 292 | 358 | 429 | 518 | 602 | ||||
11 | 132 | 175 | 223 | 279 | 345 | 410 | 496 | 576 | ||||
11.1/2 | 135 | 179 | 228 | 285 | 350 | 419 | 507 | 589 |
Diameter | Diameter in mm | Diameter in inch | Nut Sizes |
---|---|---|---|
M12 | 12 | 0.4724 | 19 |
M10 | 10 | 0.3937 | 17 |
M14 | 14 | 0.5512 | 22 |
M18 | 18 | 0.7087 | 27 |
M16 | 16 | 0.6299 | 24 |
M20 | 20 | 0.7874 | 30 |
M24 | 24 | 0.9449 | 36 |
M22 | 22 | 0.8661 | 32 |
M27 | 27 | 1.063 | 41 |
M33 | 33 | 1.2992 | 50 |
M30 | 30 | 1.1811 | 46 |
M36 | 36 | 1.4173 | 55 |
M42 | 42 | 1.6535 | 65 |
M39 | 39 | 1.5354 | 60 |
M45 | 45 | 1.7717 | 70 |
M52 | 52 | 2.0472 | 80 |
M48 | 48 | 1.8898 | 75 |
M56 | 56 | 2.2047 | 85 |
M64 | 64 | 2.5197 | 95 |
M60 | 60 | 2.3622 | 90 |
M68 | 68 | 2.6772 | 100 |
M76 | 76 | 2.9921 | 110 |
M72 | 72 | 2.8346 | 105 |
M80 | 80 | 3.1496 | 115 |
M90 | 90 | 3.5433 | 130 |
M85 | 85 | 3.3464 | 120 |
M100 | 100 | 3.937 | 145 |
M160 | 160 | 6.2992 | 230 |
M125 | 125 | 4.9212 | 180 |
M110 | 110 | 4.3307 | 155 |
M140 | 140 | 5.5118 | 200 |
Nominal Pipe Sizes | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 inch |
Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 |
Flange Size |
B16.5 Class 150 RF/ Ring Gaskets | B16.5 Class 150 FF/ Full Face Gaskets | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence | Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence | |||||||
1st | 2nd | Final | Dwg/No. | Bolt Size | 1st | 2nd | Final | Dwg*/No. | Bolt Size | |
1/2″ | 10 | 20 | 30 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
3/4″ | 13 | 27 | 40 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
1″ | 15 | 30 | 50 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
1-1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
2″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
2-1/2″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
3″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
1-1/4″ | 20 | 40 | 60 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
3-1/2″ | 40 | 80 | 120 | 8-bolt | 5/8″ | 40 | 80 | 120 | 8-bolt | 5/8″ |
4″ | 40 | 80 | 120 | 8-bolt | 5/8″ | 40 | 80 | 120 | 8-bolt | 5/8″ |
5″ | 60 | 120 | 200 | 8-bolt | 3/4″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
8″ | 60 | 120 | 200 | 8-bolt | 3/4″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
10″ | 95 | 190 | 320 | 12-bolt | 7/8″ | 95 | 190 | 320 | 12-bolt | 7/8″ |
12″ | 95 | 190 | 320 | 12-bolt | 7/8″ | 95 | 190 | 320 | 12-bolt | 7/8″ |
14″ | 147 | 294 | 490 | 12-bolt | 1″ | 147 | 294 | 490 | 12-bolt | 1″ |
16″ | 147 | 294 | 490 | 16-bolt | 1″ | 147 | 294 | 490 | 16-bolt | 1″ |
18″ | 213 | 426 | 710 | 16-bolt | 1-1/8″ | 213 | 426 | 710 | 16-bolt | 1-1/8″ |
6″ | 60 | 120 | 200 | 8-bolt | 3/4″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
20″ | 213 | 426 | 710 | 20-bolt | 1-1/8″ | 213 | 426 | 710 | 20-bolt | 1-1/8″ |
24″ | 300 | 600 | 1,000 | 20-bolt | 1-1/4″ | 300 | 600 | 1,000 | 20-bolt | 1-1/4″ |
Grade 4.8 | Marking not required. |
Grade 5.8 | Blue |
Grade 5.6 | Brown |
Grade 10.9 | White |
Grade 8.8 | Yellow |
A2-70 | Green |
Grade 12.9 | Black |
A4-70 | Red |
Grades | Carbon | Nickel | Manganese | Silicon | Sulphur | Chromium | Phosphorus | Molybdenum |
---|---|---|---|---|---|---|---|---|
302 | 0.15 | 8.00/10.00 | 2.00 | 1.00 | 0.030 | 17.00/19.00 | 0.045 | – |
309 | 0.20 | 12.00/15.00 | 2.00 | 1.00 | 0.030 | 22.00/24.00 | 0.045 | – |
304L | 0.03 | 8.00/12.00 | 2.00 | 1.00 | 0.030 | 18.00/20.00 | 0.045 | – |
304 | 0.08 | 8.00/10.50 | 2.00 | 1.00 | 0.030 | 18.00/20.00 | 0.045 | – |
309S | 0.08 | – | 2.00 | 1.00 | – | 22.00/24.00 | 0.045 | – |
317 | 0.08 | 11.00/15.00 | 2.00 | 1.00/1.00 | 0.030 | 18.00/20.00 | 0.045 | 3.00/4.00 |
310S | 0.08 | 19.00/22.00 | 2.00 | 1.5 | 0.030 | 24.00/26.00 | 0.045 | – |
316 | 0.08 | 10.00/14.00 | 2.00 | 1.00 | 0.030 | 16.00/18.00 | 0.045 | 2.00/3.00 |
310 | 0.25 | 19.00/22.00 | 2.00 | 1.5 | 0.030 | 24.00/26.00 | 0.045 | – |
316L | 0.03 | 10.00/14.00 | 2.00 | 1.00 | 0.030 | 16.00/18.00 | 0.045 | 2.00/3.00 |
347 | 0.08 | 9.00/12.00 | 2.00 | 0.5/1.00 | 0.030 | 17.00/19.00 | 0.040 | 0.5/0.75 |
317L | 0.03 | 11.00/15.00 | 2.00 | 0.75 | 0.030 | 18.00/20.00 | 0.045 | 3.00/4.00 |
321 | 0.08 | 9.00/12.00 | 2.00 | 1.00 | 0.030 | 17.00/19.00 | 0.040 | 0.75/0.75 |
Type | UNS | Elongation min |
Yield (ksi) min |
Tensile (ksi) min |
Hardness (Rockwell B) max |
Hardness (Brinell) max |
---|---|---|---|---|---|---|
302 | S30200 | 40% in 2 | 30 | 75 | 88 | 183 |
304 | S30400 | 40% in 2 | 30 | 75 | 88 | 183 |
304L | S30403 | 40% in 2 | 30 | 70 | 88 | 183 |
309 | S30900 | 40% in 2 | 30 | 75 | 95 | 217 |
309S | S30908 | 40% in 2 | 30 | 75 | 95 | 217 |
310 | S31000 | 40% in 2 | 30 | 75 | 95 | 217 |
310S | S31008 | 40% in 2 | 30 | 75 | 95 | 217 |
316 | S31600 | 40% in 2 | 30 | 75 | 95 | 217 |
316L | S31603 | 35% in 2 | 25 | 70 | 95 | 217 |
317 | S31700 | 35% in 2 | 30 | 75 | 95 | 217 |
317L | S31703 | 35% in 2 | 30 | 75 | 95 | 217 |
321 | S32100 | 40% in 2 | 30 | 75 | 88 | 183 |
347 | S34700 | 40% in 2 | 30 | 75 | 88 | 183 |
STANDARD | UNS | WERKSTOFF NR. | EN | JIS | GOST | BS | AFNOR |
304 | S30400 | 1.4301 | X5CrNi18-10 | SUS 304 | 08Х18Н10 | 304S31 | Z7CN18‐09 |
304L | S30403 | 1.4306 / 1.4307 | X2CrNi18-9 / X2CrNi19-11 | SUS 304L | 03Х18Н11 | 3304S11 | Z3CN18‐10 |
304H | S30409 | 1.4301 | – | – | – | – | – |
310 | S31000 | 1.4841 | X15CrNi25-20 | SUS 310 | 20Ch25N20S2 | 310S24 | – |
310S | S31008 | 1.4845 | X8CrNi25-21 | SUS 310S | 20Ch23N18 | 310S16 | – |
310H | S31009 | – | – | – | – | – | – |
316 | S31600 | 1.4401 / 1.4436 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 | SUS 316 | – | 316S31 / 316S33 | Z7CND17‐11‐02 |
316L | S31603 | 1.4404 / 1.4435 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 | SUS 316L | 03Ch17N14M3 / 03Ch17N14M2 | 316S11 / 316S13 | Z3CND17‐11‐02 / Z3CND18‐14‐03 |
316H | S31609 | 1.4401 | – | – | – | – | – |
316Ti | S31635 | 1.4571 | X6CrNiMoTi17-12-2 | SUS 316Ti | 08Ch17N13M2T | 320S31 | Z6CNDT17‐123 |
317 | S31700 | 1.4449 | – | SUS 317 | – | – | – |
317L | S31703 | 1.4438 | X2CrNiMo18-15-4 | SUS 317L | – | – | – |
321 | S32100 | 1.4541 | X6CrNiTi18-10 | SUS 321 | – | – | – |
321H | S32109 | 1.4878 | X12CrNiTi18-9 | SUS 321H | – | – | – |
347 | S34700 | 1.4550 | X6CrNiNb18-10 | SUS 347 | 08Ch18N12B | – | – |
347H | S34709 | 1.4961 | X6CrNiNb18-12 | SUS 347H | – | – | – |
904L | N08904 | 1.4539 | X1NiCrMoCu25-20-5 | SUS 904L | STS 317J5L | 904S13 | Z2 NCDU 25-20 |
Description | HSN Code |
---|---|
Stainless Steel Stud Bolts | 73181900 |
Carbon Steel | Stainless Steel | Alloy Steel |
5.8, 4.8, 6.8 | 304 (A2), B8, 316 (A4), B8M |
10.9,8.8, B7, 12.9, L7, B7M, , B16, L7M |
Products | We supplied to following Locations |
---|---|
M12X1.50 Wheel Stud Bolt and Nut | Italy, Iran, Chile, Singapore |
Stainless Steel Wheel Stud Bolt | Finland, Malaysia, USA, Bangladesh |
grade 10.9 m10 Galvanized stud bolt | Canada, Singapore, Malaysia, Philippines |
High tensile custom sizes stud bolt | Egypt, Spain, UK, Mexico |
20 x P1.5/P1.25 Stainless Steel Stud Bolt | Ellington -United States, Poland, Canada, UK |
M12 M16 M20 High Strength Stainless Steel A193 B8 Stud Bolt | United Kingdom -UK, Europe, UAE, Malaysia |
ASTM A193 Grade B7 thread stud bolt | France, Thailand, Europe, Qatar |
High quality duplex 2205 stainless steel stud bolt | Colombia, Malaysia, Sweden, China |
ASTM A193 B8 Stainless Steel 304 A2-70 Stud Bolt M16 | Dubai, Netherlands, Russia, Malaysia |
M14*1.5 steel wheel stud bolt | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
High strength ASTM A193 Gr B7 L7 double end stud bolt | Philippines, Nigeria, Australia, UK |
Gr5 Titanium Wheel Stud bolts | Japan, Europe, Romania, Malaysia |
carbon steel stud bolts | Oman, Malaysia, Hong Kong, UAE |
Stainless Steel A4-70 A2-70 Stud Bolts DIN967 | South Africa, Bahrain, Singapore |
ASTM A193 b7 double end stud bolts with nuts | United Arab Emirates (UAE), Norway, Malaysia, Turkey |
galvanized double end stud bolts | Dammam -KSA, Indonesia, Belgium, Philippines. |
DIN 976 stud bolts | Germany, Czechia, Malaysia, Thailand |