SS 304 Hex Head Bolt and M8 Heavy Hex Bolt exporter in Mumbai
Stainless steel alloys make good fasteners because they are strong, and have good corrosion resistance properties. The most popular grade chosen by most manufacturers is grade 304, which is also known as grade A2-70. A Stainless Steel Hex Bolts manufacturer in India recommends using this alloy because it is economical while being an effective solution in applications that require good strength, with moderate resistance to corrosion. In comparison to grade 316, which contains molybdenum, grade 304 contains 18% chromium with 8% nickel.
Its chemical composition is also why the A2 70 Hex Head Bolt may be referred to as grade 18/8. Since the chromium content of this alloy is higher than 12%, in oxidizing environments, the rate of oxidation is lower because the outer layer of the alloy forms a self-protecting passivating layer. This passivating oxide layer generated on the surface of the SS 304 Hex Head Bolt prevents the alloy from getting corroded in the presence of oxygen in the air. Although this layer is only beneficial to environments that contain oxidizing media, it is possible to galvanize the fasteners to improve their performance in other environments, with a thick coat of zinc. The main difference between electroplated fasteners and Galvanized Hex Bolts is in the width of the protective coating layer. While plating may be used for aesthetic appearances, they offer very little protection and are suited to those environments which require moderate to very little resistance to corrosion. On the other hand, a thick layer of zinc coat on the galvanized alloy 304 SS Flanged Hex Bolts is ideal for applications that require higher corrosion resistance properties.
Most Trusted Manufacturer of A2 70 Hex Head Bolt in India, Distributor of Galvanized Hex Bolts, SS 316 hex bolt Wholesaler, Stockist of stainless steel heavy hex bolt
Table of Content
Stainless Steel Hex Bolts Standard Specifications
Buy Black hex bolts, SS 304 M8 Hex Head Bolt at best price in India, Check Stainless Steel Hex Bolts ready stock
| Specifiaction | Stainless Steel Hex Bolts |
|---|---|
| Standard | DIN931, ISO 4017 |
| ISO Standards | ISO 4032, ISO 4033, ISO 4017, ISO7380 |
| DIN Standard | B.S. DIN931, 933, 912, 934, 6923, 603 |
| Surface treatment | Passivation /plain |
| Diameter | M3-M60 |
| Size | M2 – M100 |
| Length | 6mm-500mm |
| Dimensions | ASME B18.6.3 *Exception: screws 6 inches and shorter are fully threaded. |
| Head | Square, Round, T-head, Flat and Triangular |
| Neck type | Square, Oval, Triangular and Knurled |
| Drive type | Slotted, Phil, Torx, and square slot etc |
| Supplier and Distributors Located in | Manama, Montreal, Calgary, Kanpur, Bogota, Ahmedabad, Karachi, Ankara, Gimhae si, Janeiro, Ahvaz, Ranchi, Mumbai, Courbevoie, Coimbatore, Ludhiana, Abu Dhabi, Noida, Kolkata, Ernakulam, Gurgaon, Thiruvananthapuram, Chennai, India, Ludhiana, Riyadh, Nagpur, London, Pimpri Chinchwad, New Delhi, Khobar, Indore, Perth, Hyderabad, Howrah, Kuwait, Melbourne, Rajkot, Gujarat, Lagos, Jamshedpur, Dammam, Mexico, Caracas, Bengaluru, Sydney, Santiago, Tehran, Baroda, Muscat, Vadodara, Port of Spain, Bangalore, Surat, Istanbul |
A2 70 Hex Head Bolt Types
M6 Heavy Hex Head Bolts
A193 B8T 321 Hex Bolts
DIN6921 Stainless Steel M3-M56 Hex Head Flanged Bolt
DIN931 M16 M18 A2 A4 Stainless Steel SS304 Half Thread Hex Bolt
DIN 933 Custom Cold Forging Galvanized Steel Hex Bolt
Alloy Steel Black 12.9 Hex Allen Key Bolt M8*25
M8 M12 SS304 SS316 Stainless Steel Hex Bolt
Black Stainless Steel Hex Bolts
Duplex 2205 Hex Bolts
316 Stainless Steel A2 A4 Fasteners Hex Bolt
A2-70 Hex Bolts
DIN931 A2-70 Stainless Steel Hex Bolts
Stainless Steel Hex Head Bolts Dimension
| Diameter (D) | Body Diameter (D) | Across the Flats (F) | Across the Corners © | Head Height (H) | Thread Lengths (T) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Maximum | Minimum | Maximum | Minimum | Maximum | Minimum | Maximum | Minimum | 6 inch | 6 inch | |
| 1/2 | 0.515 | 0.482 | 0.875 | 0.85 | 1.01 | 0.969 | 0.364 | 0.302 | 1.25 | 1.5 |
| 3/4 | 0.768 | 0.729 | 1.25 | 1.212 | 1.443 | 1.383 | 0.524 | 0.455 | 1.75 | 2 |
| 7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 1.66 | 1.589 | 0.604 | 0.531 | 2 | 2.25 |
| 1 | 1.022 | 0.976 | 1.625 | 1.575 | 1.876 | 1.796 | 0.7 | 0.591 | 2.25 | 2.5 |
| 5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 1.227 | 1.175 | 0.444 | 0.378 | 1.5 | 1.75 |
| 1 1/8 | 1.149 | 1.098 | 1.812 | 1.756 | 2.093 | 2.002 | 0.78 | 0.658 | 2.5 | 2.75 |
| 1 3/8 | 1.404 | 1.345 | 2.188 | 2.119 | 2.526 | 2.416 | 0.94 | 0.81 | 3 | 3.25 |
| 1 1/2 | 1.531 | 1.47 | 2.375 | 2.3 | 2.742 | 2.622 | 1.036 | 0.902 | 3.25 | 3.5 |
| 1 1/4 | 1.277 | 1.223 | 2 | 1.938 | 2.309 | 2.209 | 0.876 | 0.749 | 2.75 | 3 |
| 1 3/4 | 1.785 | 1.716 | 2.75 | 2.662 | 3.175 | 3.035 | 1.196 | 1.054 | 3.75 | 4 |
| 2 | 2.039 | 1.964 | 3.125 | 3.025 | 3.608 | 3.449 | 1.388 | 1.175 | 4.25 | 4.5 |
| 2 1/4 | 2.305 | 2.214 | 3.5 | 3.388 | 4.041 | 3.862 | 1.548 | 1.327 | 4.75 | 5 |
| 2 3/4 | 2.827 | 2.711 | 4.25 | 4.112 | 4.907 | 4.688 | 1.869 | 1.632 | 5.75 | 6 |
| 3 | 3.081 | 2.961 | 4.625 | 4.475 | 5.34 | 5.102 | 2.06 | 1.815 | 6.25 | 6. |
| 2 1/2 | 2.559 | 2.461 | 3.875 | 3.75 | 4.474 | 4.275 | 1.708 | 1.479 | 5.25 | 5.5 |
Heavy Hex Bolt Dimension in Mm
Oldest Stainless Steel Hex Bolts Manufacturer in India, SS hex head bolts, hex bolts din 933 Supplier, Check hex bolt nut, hex bolt ISO 4014 Dimension Chart
| Nominal Sizes (D) | Body Diameter | Head Thickness ASTM A193 | Acro ASTM A193 THE Flats | Acro ASTM A193 Corners | ||||
|---|---|---|---|---|---|---|---|---|
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
ISO 4014 Hex Head Bolts Dimension table
| Bolt Size | A (maximum) | B | C (minimum) | D | E | F Thread Length for Bolt Length |
||
|---|---|---|---|---|---|---|---|---|
| max | min | 6 inch and shorter |
over 6 ich | |||||
| 1/4″ | 0.260 | 3/8 | 0.498 | 11/64 | 0.03 | 0.01 | 0.750 | 1.000 |
| 3/8″ | 0.388 | 9/16 | 0.747 | 1/4 | 0.03 | 0.01 | 1.000 | 1.250 |
| 7/16″ | 0.452 | 5/8 | 0.828 | 19/64 | 0.03 | 0.01 | 1.125 | 1.375 |
| 1/2″ | 0.515 | 3/4 | 0.995 | 21/64 | 0.03 | 0.01 | 1.250 | 1.500 |
| 5/8″ | 0.642 | 15/16 | 1.244 | 27/64 | 0.06 | 0.02 | 1.500 | 1.750 |
| 5/16″ | 0.324 | 1/2 | 0.665 | 13/64 | 0.03 | 0.01 | 0.875 | 1.125 |
| 3/4″ | 0.768 | 1-1/8 | 1.494 | 1/2 | 0.06 | 0.02 | 1.750 | 2.000 |
| 7/8″ | 0.895 | 1-5/16 | 1.742 | 19/32 | 0.06 | 0.02 | 2.000 | 2.250 |
| 1″ | 1.022 | 1-1/2 | 1.991 | 21/32 | 0.09 | 0.03 | 2.250 | 2.500 |
| 1-1/8″ | 1.149 | 1-11/16 | 2.239 | 3/4 | 0.09 | 0.03 | 2.500 | 2.750 |
| 1-3/8″ | 1.404 | 2-1/16 | 2.738 | 29/32 | 0.09 | 0.03 | 3.000 | 3.250 |
| 1-1/2″ | 1.531 | 2-1/4 | 2.986 | 1 | 0.09 | 0.03 | 3.250 | 3.500 |
| 1-1/4″ | 1.277 | 1-7/8 | 2.489 | 27/32 | 0.09 | 0.03 | 2.750 | 3.000 |
Dimension of 18-8 Stainless Steel Hex Bolts
| Bolt Size | A (max) | B | C (min) | D | E | F Thread Length for Bolt Length |
||
|---|---|---|---|---|---|---|---|---|
| max | min | 6 inches and shorter |
over 6inches | |||||
| 1/4″ | 0.260 | 3/8 | 0.498 | 11/64 | 0.03 | 0.01 | 0.750 | 1.000 |
| 3/8″ | 0.388 | 9/16 | 0.747 | 1/4 | 0.03 | 0.01 | 1.000 | 1.250 |
| 7/16″ | 0.452 | 5/8 | 0.828 | 19/64 | 0.03 | 0.01 | 1.125 | 1.375 |
| 1/2″ | 0.515 | 3/4 | 0.995 | 21/64 | 0.03 | 0.01 | 1.250 | 1.500 |
| 5/8″ | 0.642 | 15/16 | 1.244 | 27/64 | 0.06 | 0.02 | 1.500 | 1.750 |
| 5/16″ | 0.324 | 1/2 | 0.665 | 13/64 | 0.03 | 0.01 | 0.875 | 1.125 |
| 3/4″ | 0.768 | 1-1/8 | 1.494 | 1/2 | 0.06 | 0.02 | 1.750 | 2.000 |
| 7/8″ | 0.895 | 1-5/16 | 1.742 | 19/32 | 0.06 | 0.02 | 2.000 | 2.250 |
| 1″ | 1.022 | 1-1/2 | 1.991 | 21/32 | 0.09 | 0.03 | 2.250 | 2.500 |
| 1-1/8″ | 1.149 | 1-11/16 | 2.239 | 3/4 | 0.09 | 0.03 | 2.500 | 2.750 |
| 1-3/8″ | 1.404 | 2-1/16 | 2.738 | 29/32 | 0.09 | 0.03 | 3.000 | 3.250 |
| 1-1/2″ | 1.531 | 2-1/4 | 2.986 | 1 | 0.09 | 0.03 | 3.250 | 3.500 |
| 1-1/4″ | 1.277 | 1-7/8 | 2.489 | 27/32 | 0.09 | 0.03 | 2.750 | 3.000 |
M8 Hex Bolts Size Chart
Buy Stainless Steel Hex Bolts at a reasonable price, Distributor of M8 hex bolt, hex bolt ISO 4014 stockholder in India, View hex bolt nut Weight and SS 316 hex bolt Size Chart
| Dia./Thread Size | Fastener Length |
| 1/2"-13 | 1-1/2" |
| 1/2"-13 | 1-3/4" |
| 1/2"-13 | 1-3/4" |
| 1/2"-13 | 2" |
| 1/2"-13 | 2" |
| 1/2"-13 | 1-1/2" |
| 1/2"-13 | 2-1/4" |
| 1/2"-13 | 2-1/4" |
| 1/2"-13 | 2-1/2" |
| 1/2"-13 | 2-1/2" |
| 5/8"-11 | 1-1/2" |
| 5/8"-11 | 1-3/4" |
| 5/8"-11 | 1-3/4" |
| 5/8"-11 | 2" |
| 5/8"-11 | 2" |
| 5/8"-11 | 1-1/2" |
| 5/8"-11 | 2-1/4" |
| 5/8"-11 | 2-1/4" |
| 5/8"-11 | 2-1/2" |
| 5/8"-11 | 2-1/2" |
| 5/8"-11 | 2-3/4" |
| 5/8"-11 | 3" |
| 5/8"-11 | 3" |
| 5/8"-11 | 3-1/4" |
| 5/8"-11 | 3-1/4" |
| 5/8"-11 | 3-1/2" |
| 5/8"-11 | 3-1/2" |
| 5/8"-11 | 3-3/4" |
| 5/8"-11 | 2-3/4" |
| 5/8"-11 | 3-3/4" |
| 5/8"-11 | 4" |
| 5/8"-11 | 4" |
| 5/8"-11 | 4-1/2" |
| 5/8"-11 | 4-1/2" |
| 3/4"-10 | 1-3/4" |
| 3/4"-10 | 2" |
| 3/4"-10 | 2" |
| 3/4"-10 | 2-1/4" |
| 3/4"-10 | 2-1/4" |
| 3/4"-10 | 2-1/2" |
| 3/4"-10 | 2-1/2" |
| 3/4"-10 | 1-3/4" |
| 3/4"-10 | 3" |
| 3/4"-10 | 3" |
| 3/4"-10 | 3-1/4" |
| 3/4"-10 | 3-1/4" |
| 3/4"-10 | 3-1/2" |
| 3/4"-10 | 3-1/2" |
| 3/4"-10 | 4" |
| 3/4"-10 | 4-1/2" |
| 3/4"-10 | 4-1/2" |
| 3/4"-10 | 5" |
| 3/4"-10 | 4" |
| 3/4"-10 | 5" |
| 7/8"-9 | 3-1/2" |
| 7/8"-9 | 3-1/2" |
| 7/8"-9 | 4" |
| 7/8"-9 | 4" |
| 7/8"-9 | 4-1/2" |
| 7/8"-9 | 4-1/2" |
| 7/8"-9 | 5" |
| 7/8"-9 | 5" |
| 1"-8 | 3-1/2" |
| 1"-8 | 3-1/2" |
| 1"-8 | 4" |
| 1"-8 | 4" |
| 1"-8 | 4-1/2" |
| 1"-8 | 4-1/2" |
| 1-1/8"-7 | 5" |
| 1-1/8"-7 | 5" |
| 1-1/4"-7 | 6" |
Weight Chart of DIN 931 Hex Bolts
| Diameter | M12 | M16 | M20 | M22 | M24 | M27 | M30 | M36 |
|---|---|---|---|---|---|---|---|---|
| Length | ||||||||
| 30 | 49.1 | |||||||
| 35 | 53.6 | |||||||
| 40 | 58.0 | 105 | ||||||
| 45 | 62.1 | 113 | 188 | |||||
| 50 | 66.6 | 121 | 200 | 257 | ||||
| 70 | 84.3 | 153 | 249 | 316 | 398 | 532 | ||
| 55 | 71.0 | 129 | 212 | 272 | ||||
| 60 | 75.4 | 137 | 225 | 286 | 362 | |||
| 65 | 79.9 | 145 | 237 | 301 | 380 | |||
| 75 | 88.8 | 160 | 262 | 331 | 415 | 554 | 701 | |
| 80 | 93.2 | 168 | 274 | 346 | 433 | 576 | 728 | |
| 85 | 97.6 | 176 | 286 | 361 | 451 | 599 | 756 | 1184 |
| 90 | 102 | 184 | 298 | 375 | 467 | 621 | 784 | 1224 |
| 95 | 107 | 192 | 310 | 390 | 485 | 644 | 812 | 1264 |
| 120 | 231 | 372 | 465 | 574 | 755 | 949 | 1455 | |
| 100 | 199 | 322 | 405 | 503 | 665 | 838 | 1304 | |
| 105 | 207 | 335 | 420 | 520 | 688 | 865 | 1336 | |
| 110 | 215 | 347 | 435 | 538 | 710 | 893 | 1376 | |
| 115 | 223 | 359 | 450 | 556 | 732 | 921 | 1415 | |
| 125 | 239 | 384 | 479 | 591 | 777 | 976 | 1495 | |
| 150 | 446 | 554 | 680 | 890 | 1115 | 1695 | ||
| 130 | 247 | 396 | 494 | 609 | 800 | 1004 | 1535 | |
| 135 | 409 | 509 | 627 | 822 | 1032 | 1575 | ||
| 140 | 421 | 524 | 645 | 845 | 1059 | 1615 | ||
| 145 | 433 | 539 | 662 | 867 | 1087 | 1655 | ||
| 155 | 458 | 569 | 698 | 912 | 1143 | 1735 | ||
| 160 | 584 | 716 | 935 | 1170 | 1775 | |||
| 185 | 804 | 1047 | 1309 | 1974 | ||||
| 165 | 599 | 733 | 957 | 1198 | 1815 | |||
| 170 | 751 | 979 | 1226 | 1855 | ||||
| 175 | 769 | 1002 | 1254 | 1895 | ||||
| 180 | 787 | 1024 | 1281 | 1935 | ||||
| 190 | 822 | 1069 | 1337 | 2014 | ||||
| 200 | 1114 | 1392 | 2094 | |||||
| 195 | 840 | 1092 | 1365 | 2054 |
80% repeat orders from below countries
| Products | We supplied to following Locations |
|---|---|
| M6 Heavy Hex Head Bolts | Philippines, UK, Australia, Nigeria |
| A193 B8T 321 Hex Bolts | Saudi Arabia (KSA), Kuwait, South Africa, Brazil |
| DIN6921 Stainless Steel M3-M56 Hex Head Flanged Bolt | Japan, Romania, Europe, Malaysia |
| DIN931 M16 M18 A2 A4 Stainless Steel SS304 Half Thread Bolt | Oman, UAE, Hong Kong, Malaysia |
| DIN 933 Custom Cold Forging Galvanized Steel Bolt | Chile, Singapore, Iran, Italy |
| Alloy Steel Black 12.9 Hex Allen Key Bolt M8*25 | United Arab Emirates (UAE), Norway, Turkey, Malaysia |
| M8 M12 SS304 SS316 Stainless Steel Bolt | United Kingdom -UK, Malaysia, Europe, UAE |
| Black Stainless Steel Bolts | South Africa, Bahrain, Singapore, Singapore |
| Duplex 2205 Bolts | Dammam -KSA, Belgium, Philippines, Indonesia. |
| 316 Stainless Steel A2 A4 Fasteners Bolt | Qatar, Thailand, Europe, France. |
| A2-70 Hex Bolts | Malaysia, Thailand, Germany, Czechia |
| DIN931 A2-70 Stainless Steel Hex Bolts | Finland, Bangladesh, Malaysia, USA |
| 18-8 Stainless Steel Bolts | Canada, Malaysia, Philippines, Singapore |
| DIN931 Grade 8.8 Bolts And Nuts | Netherlands, Russia, Malaysia, Dubai |
| DIN 933 Full Shreaded Hex Bolt | Egypt, UK, Mexico, Spain |
| A2 Hex Bolts | UK, Ellington -United States, Poland, Canada |
| SS Hex Head Bolts | Sweden, China, Malaysia, Colombia |