Stainless steels with a low carbon content offer significant welding characteristics over those grades that contain a higher degree of carbon. Grade 316 is an alloy that has good weldability. However, because the content of carbon in this alloy is higher, it is prone to intergranular corrosion in the area that has been welded. Welding makes use of short bursts of high temperatures to melt the alloy, facilitating the joining of two sections.
At this stage, the carbon in the melted alloy forms precipitates, which in turn causes the grains to become sensitized, resulting in intergranular corrosion. This can be remedied by converting grade 316 into Stainless Steel 316L Flanges, which is similar to the initial grade, with the exception of its carbon content. Lowering the carbon content prevents sensitization of the grain boundary since there is no precipitate formed. Altering the chemical composition of any alloy could affect the other properties of the alloys as well. In the case of sa182 f316l Slip on Flanges, lowering the carbon content would mean loss of its high strength and hardness, to which it was initially attributed. Therefore as an f316l flanges manufacturer, who understands this fact, nitrogen will be added to the new alloy. Nitrogen, which stabilizes austenite also improves the mechanical properties, namely the yield strength of the alloy. Furthermore, nitrogen improves the pitting resistance of the UNS S31603 Weld Neck Flange, making it possible to use in marine engineering. Similar to the original alloy, 316L is a stainless steel grade that exhibits resistance to marine water corrosion on similar levels. To simplify the grade, ASTM A182 316L Blind Flange, is also referred to as marine grade and it may be dual certified.
Specifications List | ASTM A182 and ASME SA182 |
---|---|
Standard | ASME, DIN, ANSI, BS, EN etc. |
Size Chart | 1/2 inch to 48 inch |
Class / Pressure Rating | Class 150, 300, 1500, 600, 900, 2500 LBS, PN6, PN16, PN10, PN40, PN25, PN64 |
Flange Face Type | Lap-Joint Face, Raised Face, Ring Type Joint, Flat Face, Small Tongue, Large Male-Female, Small Male-Female, Large Tongue & Groove Flanges manufacturer and Supplier |
Flanges Marking | All Stainless Steel 316l Flanges are marked as follows: Supplier or Manufacturer’s Name, Size, Class, Bore, Dimension, Material, Heat No. Or according to the customer’s request. |
Stainless Steel 316l Flanges Supplier and Distributors Located in | Kuwait, Lagos, Surat, Janeiro, Howrah, Khobar, Kanpur, Jamshedpur, Courbevoie, Riyadh, Karachi, Coimbatore, Bangalore, Manama, Mumbai, Tau, Perth, Noida, India, Chennai, Melbourne, Ahvaz, Gimhae-si, Kolkata, Vadodara, Hyderabad, Calgary, Dammam, Thiruvananthapuram, Caracas, Bengaluru, Port-of-Spain, Rajkot, Ludhiana, Istanbul, London, Tehran, Ludhiana, Bogota, Abu- Mexico, Indore, Muscat, Pimpri-Chinchwad, Dhabi, Gujarat, Ranchi, Ahmedabad, Nagpur, Gurgaon, Santiago, Montreal, New-Delhi, Sydney, Ernakulam, Baroda, Ankara |
Dn 32 125 150 Flat Ss 316L Inch Reducing Raised Face Stainless Steel Flange
316L Class 150 Sch10s Schedule 40 Slip On Stainless Steel Flange
8 Inch 316L Stainless Steel Blind Flanges
Forged Stainless Steel Flanges 316L
Aisi 316L Flange 34 Inch Flange
Jis 10k Blind Flange Ff Stainless Steel 316L
6 Inch Aisi 316L Stainless Steel Flange
Decoration 316L Stainless Steel Plate Covers Flange
Ansi Standard 316L Stainless Steel Rtj Flange
6 inch Flange Universal Expansion Joint Stainless Steel 316L
Stainless Steel 316L Pn10 Pn16 Flat Flanges
Spectacle Blind Flange 300 4inch Stainless Steel 316L
Grade | Carbon | Manganese | Silicon | Phosphorus | Sulfur | Chromium | Molybdenum | Nickel | Nitrogen |
---|---|---|---|---|---|---|---|---|---|
SS 316L | 0.035 maximum | 2.0 maximum | 1.0 maximum | 0.045 maximum | 0.030 maximum | 16 To 18 | 2 To 3 | 10 To 14 | 68.89 minimum |
Melting Point | Density | Elongation | Tensile Strength | Yield Strength (0.2%Offset) |
---|---|---|---|---|
1399 °C (2550 °F) | 8.0 g/cm3 | 35 % | Psi – 75000, MPa – 515 | Psi – 30000, MPa – 205 |
STANDARD | WERKSTOFF NR. | EN | UNS | JIS | BS | GOST | AFNOR |
---|---|---|---|---|---|---|---|
SS 316L | 1.4435 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 |
Temperature °F | Class 150 LB | Class 300 LB | Class 400 LB | Class 600 LB | Class 900 LB | Class 1500 LB | Class 2500 LB |
300 | 205 | 540 | 720 | 1080 | 1620 | 2700 | 4500 |
-20 to 100 | 275 | 720 | 960 | 1440 | 2160 | 3600 | 6000 |
200 | 230 | 600 | 800 | 1200 | 1800 | 3000 | 5000 |
400 | 190 | 495 | 660 | 995 | 1490 | 2485 | 4140 |
500 | 170 | 465 | 620 | 930 | 1395 | 2330 | 3880 |
650 | 125 | 430 | 575 | 860 | 1290 | 2150 | 3580 |
700 | 110 | 425 | 565 | 850 | 1275 | 2125 | 3540 |
750 | 95 | 415 | 555 | 830 | 1245 | 2075 | 3460 |
800 | 80 | 405 | 540 | 805 | 1210 | 2015 | 3360 |
850 | 65 | 395 | 530 | 790 | 1190 | 1980 | 3300 |
900 | 50 | 390 | 520 | 780 | 1165 | 1945 | 3240 |
600 | 140 | 435 | 580 | 875 | 1310 | 2185 | 3640 |
950 | 35 | 380 | 510 | 765 | 1145 | 1910 | 3180 |
1000 | 20 | 320 | 430 | 640 | 965 | 1605 | 2675 |
1050 | 20 | 310 | 410 | 615 | 925 | 1545 | 2570 |
1150 | 20 | 200 | 265 | 400 | 595 | 995 | 1655 |
1200 | 20 | 155 | 205 | 310 | 465 | 770 | 1285 |
1250 | 20 | 115 | 150 | 225 | 340 | 565 | 945 |
1300 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
1350 | 20 | 60 | 80 | 125 | 185 | 310 | 515 |
1400 | 20 | 50 | 65 | 95 | 145 | 240 | 400 |
1450 | 15 | 35 | 45 | 70 | 105 | 170 | 285 |
1500 | 10 | 25 | 35 | 55 | 80 | 135 | 230 |
1100 | 20 | 255 | 345 | 515 | 770 | 1285 | 2145 |
Pipe Normal Diameter | Outer Diameter Flange | Thickness Of Flange Min | Diameter of Hub |
Diameter of Raised Face | Length Hub.Y | Thread Length | Diameter of Bolt Circle |
Diameter of Bolt Holes |
Number of Bolts |
Diameter of Bolts (inch) |
KG | LB | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
inch | dn | O | C | X | G | Y | T | BC | BH | BN | BD | ||
1/2" | 15 | 89.00 | 11.20 | 30.20 | 35.10 | 15.70 | 15.70 | 60.50 | 15.80 | 4 | 1/2" | 0.4 | 0.9 |
3/4" | 20 | 98.50 | 12.70 | 38.10 | 42.90 | 15.70 | 15.70 | 69.90 | 15.80 | 4 | 1/2" | 0.7 | 1.5 |
1-1/4" | 32 | 117.50 | 15.70 | 58.70 | 63.50 | 20.60 | 20.60 | 88.90 | 15.80 | 4 | 1/2" | 1.2 | 2.6 |
1-1/2" | 40 | 127.00 | 17.50 | 65.00 | 73.20 | 22.40 | 22.40 | 98.60 | 15.80 | 4 | 1/2" | 1.5 | 3.3 |
2" | 50 | 152.50 | 19.10 | 77.70 | 91.90 | 25.40 | 25.40 | 120.70 | 19.10 | 4 | 5/8" | 2.3 | 5.1 |
2-1/2" | 65 | 178.00 | 22.40 | 90.40 | 104.60 | 28.40 | 28.40 | 139.70 | 19.10 | 4 | 5/8" | 3.7 | 8.1 |
1" | 25 | 108.00 | 14.20 | 49.30 | 50.80 | 17.50 | 17.50 | 79.30 | 15.80 | 4 | 1/2" | 0.8 | 1.8 |
3" | 80 | 190.50 | 23.90 | 108.00 | 127.00 | 30.20 | 30.20 | 152.40 | 19.10 | 4 | 5/8" | 4.1 | 9 |
3-1/2" | 90 | 216.00 | 23.90 | 122.20 | 139.70 | 31.80 | 31.80 | 177.80 | 19.10 | 8 | 5/8" | 5.1 | 11.2 |
4" | 100 | 228.50 | 23.90 | 134.90 | 157.20 | 33.30 | 33.30 | 190.50 | 19.10 | 8 | 5/8" | 5.9 | 13 |
6" | 150 | 279.50 | 25.40 | 192.00 | 215.90 | 39.60 | 39.60 | 241.30 | 22.40 | 8 | 3/4" | 8.4 | 18.5 |
8" | 200 | 343.00 | 28.40 | 246.10 | 269.70 | 44.50 | 44.50 | 298.50 | 22.40 | 8 | 3/4" | 13 | 28.6 |
10" | 250 | 406.50 | 30.20 | 304.80 | 323.90 | 49.30 | 49.30 | 362.00 | 25.40 | 12 | 7/8" | 18 | 39.5 |
12" | 300 | 482.50 | 31.80 | 365.30 | 381.00 | 55.60 | 55.60 | 431.80 | 25.40 | 12 | 7/8" | 29 | 64 |
5" | 125 | 254.00 | 23.90 | 163.60 | 185.70 | 36.60 | 36.60 | 215.90 | 22.40 | 8 | 3/4" | 7 | 15.4 |
14" | 350 | 533.50 | 35.10 | 400.10 | 412.80 | 57.20 | 57.20 | 476.30 | 28.50 | 12 | 1" | 39 | 86 |
24" | 600 | 813.00 | 47.80 | 663.40 | 692.20 | 82.60 | 82.60 | 749.30 | 35.10 | 20 | 1 1/4" | 97 | 214 |
16" | 400 | 597.00 | 36.60 | 457.20 | 469.90 | 63.50 | 63.50 | 539.80 | 28.50 | 16 | 1" | 47 | 103 |
18" | 450 | 635.00 | 39.60 | 505.00 | 533.40 | 68.30 | 68.30 | 577.90 | 31.80 | 16 | 1 1/8" | 57 | 126 |
20" | 500 | 698.50 | 42.90 | 558.80 | 584.20 | 73.20 | 73.20 | 635.00 | 31.80 | 20 | 1 1/8" | 76 | 167 |
Nominal Pipe Size | Outside Diameter of Flanges | Thickness of Flanges | Diameter of Raised Face | Diameter of Hub at Base | Length Thru Hub | Diameter or Bore | Diameter of Hub at Bevel | Radius of Fillet | Depth of Socket | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Welding Neck | Slip-On Threaded Socket | Lap Joint | Slip-on Socket | Lap Joint | ||||||||
O | Q | R | X | Y | Y | Y | W | B | H | r | Z | |
1/2 | 3-1/2 | 7/16 | 1-3/8 | 1-3/16 | 1-7/8 | 5/8 | 5/8 | .88 | .90 | .84 | 1/8 | 3/8 |
1 | 4-1/4 | 9/16 | 2 | 1-15/16 | 2-3/16 | 11/16 | 11/16 | 1.36 | 1.38 | 1.32 | 1/8 | 1/2 |
1-1/4 | 4-5/8 | 5/8 | 2-1/2 | 2-5/16 | 2-1/4 | 13/16 | 13/16 | 1.70 | 1.72 | 1.66 | 3/16 | 9/16 |
1-1/2 | 5 | 11/16 | 2-7/8 | 2-9/16 | 2-7/16 | 7/8 | 7/8 | 1.95 | 1.97 | 1.90 | 1/4 | 5/8 |
3/4 | 3-7/8 | 1/2 | 1-11/16 | 1-1/2 | 2-1/16 | 5/8 | 5/8 | 1.09 | 1.11 | 1.05 | 1/8 | 7/16 |
2 | 6 | 3/4 | 3-5/8 | 3-1/16 | 2-1/2 | 1 | 1 | 2.44 | 2.46 | 2.38 | 5/16 | 11/16 |
2-1/2 | 7 | 7/8 | 4-1/8 | 3-9/16 | 2-3/4 | 1-1/8 | 1-1/8 | 2.94 | 2.97 | 2.88 | 5/16 | 3/4 |
3-1/2 | 8-1/2 | 15/16 | 5-1/2 | 4-13/16 | 2-13/16 | 1-1/4 | 1-1/4 | 4.07 | 4.10 | 4.00 | 3/8 | 7/8 |
4 | 9 | 15/16 | 6-3/16 | 5-5/16 | 3 | 1-5/16 | 1-5/16 | 4.57 | 4.60 | 4.50 | 7/16 | 15/16 |
5 | 10 | 15/16 | 7.5/16 | 6-7/16 | 3-1/2 | 1-7/16 | 1-7/16 | 5.66 | 5.69 | 5.56 | 7/16 | 15/16 |
6 | 11 | 1 | 8-1/2 | 7-9/16 | 3-1/2 | 1-9/16 | 1-9/16 | 6.72 | 6.75 | 6.63 | 1/2 | 1-1/16 |
8 | 13-1/2 | 1-1/8 | 10-5/8 | 9-11/16 | 4 | 1-3/4 | 1-3/4 | 8.72 | 8.75 | 8.63 | 1/2 | 1-1/4 |
3 | 7-1/2 | 15/16 | 5 | 4-1/4 | 2-3/4 | 1-3/16 | 1-3/16 | 3.57 | 3.60 | 3.50 | 3/8 | 13/16 |
10 | 16 | 1-3/16 | 12-3/4 | 12 | 4 | 1-15/16 | 1-15/16 | 10.88 | 10.92 | 10.75 | 1/2 | 1-5/16 |
12 | 19 | 1-1/4 | 15 | 14-3/8 | 4-1/2 | 2-3/16 | 2-3/16 | 12.88 | 12.92 | 12.75 | 1/2 | 1-9/16 |
14 | 21 | 1-3/8 | 16-1/4 | 15-3/4 | 5 | 2-1/4 | 3-1/8 | 14.14 | 14.18 | 14.00 | 1/2 | 1-5/8 |
16 | 23-1/2 | 1-7/16 | 18-1/2 | 18 | 5 | 2-1/2 | 3-7/16 | 16.16 | 16.19 | 16.00 | 1/2 | 1-3/4 |
20 | 27-1/2 | 1-11/16 | 23 | 22 | 5-11/16 | 2-7/8 | 4-1/16 | 20.20 | 20.25 | 20.00 | 1/2 | 2-1/8 |
24 | 32 | 1-7/8 | 27-1/4 | 26-1/8 | 6 | 3-1/4 | 4-3/8 | 24.25 | 24.25 | 24.00 | 1/2 | 2-1/2 |
18 | 25 | 1-9/16 | 21 | 19-7/8 | 5-1/2 | 2-11/16 | 3-13/16 | 18.18 | 18.20 | 18.00 | 1/2 | 1-15/16 |
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 |
Products | We supplied to following Locations |
---|---|
150# Slip-on 10 inch Rf Pipe Flange Stainless Steel 316L | France, Thailand, Europe, Qatar |
Stainless Steel 316L Pn10 Pn16 Flat Flanges | Oman, Malaysia, Hong Kong, UAE |
Aisi 316L Flange 34 Inch Flange | Finland, Malaysia, USA, Bangladesh |
Stainless Steel 316L Kf16 Flange To 12.7mm | Italy, Iran, Chile, Singapore |
2inch 316L Stainless Steel Cf 4-way Cross Flange | Egypt, Spain, UK, Mexico |
Spectacle Blind Flange 300# 4'' Stainless Steel 316L | Ellington -United States, Poland, Canada, UK |
Dn 32 125 150 Flat Ss 316L Inch Reducing Raised Face Stainless Steel Flange | United Kingdom -UK, Europe, UAE, Malaysia |
Jis 10k Blind Flange Ff Stainless Steel 316L | Colombia, Malaysia, Sweden, China |
6 inch Flange Universal Expansion Joint Stainless Steel 316L | Dubai, Netherlands, Russia, Malaysia |
Forged Stainless Steel Flanges 316L | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
Decoration 316L Stainless Steel Plate Covers Flange | Philippines, Nigeria, Australia, UK |
Ss 316L Welding Neck Orifice Flange | South Africa, Bahrain, Singapore |
Stainless Steel Ansi 316L Flange So/wn/blind Flange | Canada, Singapore, Malaysia, Philippines |
316L Class 150 Sch10s Schedule 40 Slip On Stainless Steel Flange | United Arab Emirates (UAE), Norway, Malaysia, Turkey |
Ansi Standard 316L Stainless Steel Rtj Flange | Dammam -KSA, Indonesia, Belgium, Philippines. |
8 Inch 316L Stainless Steel Blind Flanges | Japan, Europe, Romania, Malaysia |
6 Inch Aisi 316L Stainless Steel Flange | Germany, Czechia, Malaysia, Thailand |