• info@vineshsteel.com
  • +91 - 022 - 66541072

ASME B16.5 SWRF Flanges and Carbon Steel Reducing Socket Weld Flange Supplier in India

Most flanges are built for specific purposes, as their designs accommodate a part of their application. In the case of pipes that have a smaller sized bore, the Socket Weld Flanges are the corresponding connection used. In such pipes, the media flowing through is not high pressured and thus is referred to as non-critical. Hence, these connections are considered ideal for operations that are of a less arduous nature.

Socket Weld Flange

There is only one method of connecting the Socket Weld Raised Face Flange to a piping system. A fillet weld is used on the outer side as a means of joining. As welding is the only way to form connections here, the material used in their manufacture must have good weldability and be able to resist corrosion. For this reason, only, stainless steel or carbon steel (weldable) grades are preferred in their production. A Stainless Steel Socket Weld Flange that contains very low carbon content suits this application, especially since they can eliminate the occurrence of intergranular corrosion as well as oxidation corrosion, with their chemical composition. On the other hand, high strength with hardness are also properties required in some applications. Here the only property that matters is durability and so the Carbon Steel Reducing Socket Weld Flange used delivers an excellent performance. The main drawback of using this device is spacing it out correctly. In an incorrect setup, there are problems associated with the setup. And so, using the appropriate material or appropriate steel grade, in this case, is a must while producing the ASME B16.5 SWRF Flanges. It is because of the presence of a problem causing space in a piping system that uses this device, that some applications altogether do not recommend using a Reducing Socket Weld Flange.

IBR approved Socket Weld Flange, Alloy steel SWRF Flange Manufacturer in India, Check A350 LF2 SW Flanges Dimensions

 

Standard Specification Of Socket Weld Pipe Flanges

Check Socket Weld Pipe Flanges specification, Socket Weld Hydraulic Flanges Weight Chart, Buy 304 Stainless Steel Socket Weld Flange at best price

Material Specification Stainless Steel Socket Weld Flanges
Flanges Standards ASME B16.47 type A, EN 1092-1, JIS, ASME B16.5, UNI, DIN
Pressure Rating Class 150 - Class 2500
High Temperature Above 200°C or 400°F For Class 150 / Above 400°C or 750°F
Low Temperature Above -29 Degree C or −20°F
South African Standard Flanges SANS Flanges And SABS Flanges
European Standard Flanges JIS B2220 Flanges 5k to 30k and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, UNI, DIN, EN 1092-1
Surface Finish smooth, concentric serrated, stock
Standard Cover : tolerances, pressure ratings & temperature ratings, dimensions, materials, marking, weight, testing
Size Chart Normal Pipe Size 1/2 - NPS 24 inch
Thickness Normal Pipe Size ≤ 18
Bore Diameter Normal Pipe ≤ 10
Flanges Face Type Small Tongue, Lap-Joint Face, Raised Face, Ring Type Joint, Flat Face, Large Male-Female, Small Male-Female, Large Tongue & Groove Flanges manufacturer and Supplier
Flanges Marking All Flanges are marked as follows: Supplier or Manufacturer’s Name, Size, Class, Bore, Dimension, Material, Heat No. Or according to the customer’s request.
Supplier and Distributors Located in Jamshedpur, Port of Spain, Ankara, Khobar, Mexico, Rajkot, Coimbatore, Courbevoie, Santiago, Montreal, Bangalore, Gimhae si, Dammam, Ahvaz, Muscat, Bengaluru, Kanpur, Baroda, Janeiro, Gujarat, Karachi, Noida, Gurgaon, Indore, Tehran, Mumbai, Lagos, India, Sydney, Melbourne, Nagpur, Riyadh, Pimpri Chinchwad, New Delhi, Caracas, London, Bogota, Kolkata, Chennai, Hyderabad, Howrah, Ludhiana, Kuwait, Manama, Perth, Ahmedabad, Abu Dhabi, Surat, Thiruvananthapuram, Ernakulam, Istanbul, Ludhiana, Ranchi, Calgary, Vadodara

Types of Reducing Socket Weld Flange

Socket Weld Flange Type

Sa A105 Socket Welding Neck Flange

Sa A105 Socket Welding Neck Flange

Socket Welding 3000 Psi Flange

Socket Welding 3000 Psi Flange

Sw Socket Welding Flange 38 Inch Hastelloy C276 Plate Flange

Sw Socket Welding Flange 38 Inch Hastelloy C276 Plate Flange

Stainless Steel 1 Inch Sw Socket Welding Flanges

Stainless Steel 1 Inch Sw Socket Welding Flanges

Dn250 Stainless Steel Socket Weld Flanges

Dn250 Stainless Steel Socket Weld Flanges

Ansi B16.5 Class150lbs Stainless Steel Socket Weld Raised Face Sch40s Flanges

Ansi B16.5 Class150lbs Stainless Steel Socket Weld Raised Face Sch40s Flanges

Stainless Steel Adapter Socket Weld Welding Neck Flanges

Stainless Steel Adapter Socket Weld Welding Neck Flanges

Plastic Hdpe Socket 75mm Stub Flange

Plastic Hdpe Socket 75mm Stub Flange

Forged Stainless Steel Socket Weld Flange

Forged Stainless Steel Socket Weld Flange

3000psi 6000psi Socket Weld Hydraulic Flanges

3000psi 6000psi Socket Weld Hydraulic Flanges

Din Stainless Steel 304 316 316l Forged Pn 16 Socket Weld Flange

Din Stainless Steel 304 316 316l Forged Pn 16 Socket Weld Flange

Class150 B16.5 Carbon Steel Sa A105 Socket Welding Flange

Class150 B16.5 Carbon Steel Sa A105 Socket Welding Flange

Carbon Steel Forged Astm A105 Socket Welding Flange

Carbon Steel Forged Astm A105 Socket Welding Flange

Socket Din 2633 Pn16 Flanges

Socket Din 2633 Pn16 Flanges

Din 2533 Pn16 Socket Welding Flange

Din 2533 Pn16 Socket Welding Flange

Stainless Steel Sae Socket Weld Flange

Stainless Steel Sae Socket Weld Flange

Stainless Steel 304/316 2inch Class150 Socket Weld Flanges

Stainless Steel 304/316 2inch Class150 Socket Weld Flanges

8 Holes Socket Welding Flanges

8 Holes Socket Welding Flanges

Titanium Socket Weld Flanges

Titanium Socket Weld Flanges

Asme B16.5 Stainless Steel 300lb 3inch Socket Welding Flange

Asme B16.5 Stainless Steel 300lb 3inch Socket Welding Flange

3/4 Inch 150 Sch 40 Socket Weld Raised Face Flanges

3/4 Inch 150 Sch 40 Socket Weld Raised Face Flanges


Socket Weld Flange Pressure Ratings

Temperature (F°) 150 LBS 300 LBS 400 LBS 600 LBS 900 LBS 1500 LBS 2500 LBS
-20 to 100 285 740 985 1480 2220 3705 6170
200 260 680 905 1360 2035 3395 5655
400 200 635 845 1265 1900 3170 5280
500 170 605 805 1205 1810 3015 5025
600 140 570 755 1135 1705 2840 4730
750 95 505 675 1015 1520 2535 4230
650 125 550 730 1100 1650 2745 4575
300 230 655 870 1310 1965 3270 5450
700 110 530 710 1060 1590 2655 4425
800 80 410 550 825 1235 2055 3430
850 65 320 425 640 955 1595 2655
1000 20 85 115 170 255 430 715
900 50 230 305 460 690 1150 1915
950 35 135 185 275 410 685 1145

Socket Weld Flange Drawing

Socket Weld Flange Drawing

Socket Weld Flange Installation

Insert the pipe end into socket weld flange,, until the pipe base touch the shoulder region, pull back 1.6mm (1/16'') distance of the embedded pipe at that point do filet welding. The fact is to make an extension hole (1 filet weld) between the flange and the pipes or fittings.

Socket Weld Flange Class 150 Dimensions

Size in Inch Size in MM Outer Diameter Flange Thickness Hub Ooter Diameter Flange Length RF Diameter RF Height Socket Depth PCD Socket Bore No of Bolts Bolt Size UNC Machine Bolt Length RF Stud Length Hole Size ISO Stud Size Weight in kg
A B C D E F G H J
1/2 15 90 9.6 30 14 34.9 2 10 60.3 22.2 4 1/2 50 55 5/8 M14 0.8
1 25 110 12.7 49 16 50.8 2 13 79.4 34.5 4 1/2 55 65 5/8 M14 0.9
1 1/4 32 115 14.3 59 19 63.5 2 14 88.9 43.2 4 1/2 55 70 5/8 M14 1.4
3/4 20 100 11.2 38 14 42.9 2 11 69.9 27.7 4 1/2 50 65 5/8 M14 0.9
2 1/2 65 180 20.7 90 27 105 2 19 139.7 74.6 4 5/8 75 90 3/4 M16 3.2
1 1/2 40 125 15.9 65 21 73 2 16 98.4 49.5 4 1/2 65 70 5/8 M14 1.4
2 50 150 17.5 78 24 92.1 2 17 120.7 61.9 4 5/8 70 85 3/4 M16 2.3
3 80 190 22.3 108 29 127 2 21 152.4 90.7 4 5/8 75 90 3/4 M16 3.7

Socket Weld Flange Dimensions Class 300

Manufacturer and supplier of Carbon Steel A105 SWRF Flange and A182 Gr F316 SW Pipe Flange, View Class 1500 Socket Weld Flange Dimensions and Pressure Ratings
Size in Inch Size in MM Outer Diameter Flange Thickness Hub Outer Diameter Flange Length RF Diameter RF Height Socket Depth PCD Socket Bore No of Bolts Bolt Size UNC Machine Bolt Length RF Stud Length Hole Size ISO Stud Size Weight in kg
A B C D E F G H J
1/2 15 95 12.7 38 21 34.9 2 10 66.7 22.2 4 1/2 55 65 5/8 M14 1.2
1 25 125 15.9 54 25 50.8 2 13 88.9 34.5 4 5/8 65 75 3/4 M16 1.4
1 1/4 32 135 17.5 64 25 63.5 2 14 98.4 43.2 4 5/8 70 85 3/4 M16 1.8
3/4 20 115 14.3 48 24 42.9 2 11 82.6 27.7 4 5/8 65 75 3/4 M16 1.4
1 1/2 40 155 19.1 70 29 73 2 16 114.3 49.5 4 3/4 75 90 7/8 M20 2.7
2 50 165 20.7 84 32 92.1 2 17 127 61.9 8 5/8 75 90 3/4 M16 3.2
3 80 210 27 117 41 127 2 21 168.3 90.7 8 3/4 90 110 7/8 M20 5.9
2 1/2 65 190 23.9 100 37 105 2 19 149.2 74.6 8 3/4 85 100 7/8 M20 4.6

600# Socket Weld Flange Dimensions

Size in Inch Size in MM Outer Diameter Flange Thickness Hub OD Flange Length RF Diameter RF Height Socket Depth PCD Socket Bore No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size Weight in kg
A B C D E F G H J
1/2 15 95 14.3 38 22 34.9 7 10 66.7 22.2 4 1/2 75 5/8 M14 1.3
1 25 125 17.5 54 27 50.8 7 13 88.9 34.5 4 5/8 90 3/4 M16 1.8
1 1/4 32 135 20.7 64 29 63.5 7 14 98.4 43.2 4 5/8 95 3/4 M16 2.3
3/4 20 115 15.9 48 25 42.9 7 11 82.6 27.7 4 5/8 90 3/4 M16 1.4
1 1/2 40 155 22.3 70 32 73 7 16 114.3 49.5 4 3/4 110 7/8 M20 3.2
2 1/2 65 190 28.6 100 41 105 7 19 149.2 74.6 8 3/4 120 7/8 M20 5.9
3 80 210 31.8 117 46 127 7 21 168.3 90.7 8 3/4 125 7/8 M20 7.3
2 50 165 25.4 84 37 92.1 7 17 127 61.9 8 5/8 110 3/4 M16 4.1

Class 1500 Socket Weld Flange Dimensions

Size in Inch Size in MM Outer Diameter Flange Thicknee Hub Outer Diameter Flange Length RF Diameter RF Height Socket Depth PCD Socket Bore No of Bolts Bolt Size UNC RF Stud Length Hole Size ISO Stud Size Weight in kg
A B C D E F G H J
3/4 20 130 25.4 44 35 42.9 7 11 88.9 27.7 4 3/4 115 7/8 M20 2.3
1 1/2 40 180 31.8 70 44 73 7 16 123.8 49.5 4 1 140 1 1/8 M27 5.5
1 25 150 28.6 52 41 50.8 7 13 101.6 34.5 4 7/8 125 1 M24 3.7
1/2 15 120 22.3 38 32 34.9 7 10 82.6 22.2 4 3/4 110 7/8 M20 1.8
1 1/4 32 160 28.6 64 41 63.5 7 14 111.1 43.2 4 7/8 125 1 M24 4.1
2 50 215 38.1 105 57 92.1 7 17 165.1 61.9 8 7/8 145 1 M24 9.8
3 80 265 47.7 133 N/A 127 7 203.2 N/A 8 1 1/8 180 1 1/4 M30 21.8
2 1/2 65 245 41.3 124 64 105 7 19 190.5 74.6 8 1 160 1 1/8 M27 16.4

Socket Weld Flange Dimensions Class 3000

Nominal Pipe Size Socket Bore Diameter (B) Fitting Bore Diameter (D) Socket Wall Thickness (C) Socket Depth (J) Laying Length Weight in kg
Inches MM Minimum Maximum Minimum Maximum Avg Minimum Minimum Full Coupling
(E)
Half Coupling
(F)
Full Coupling Half Coupling
1/8 6 10.8 11.2 6.1 7.6 3.18 3.18 9.5 6.5 16.0 0.041 0.045
1/4 8 14.2 14.6 8.5 10.0 3.78 3.30 9.5 6.5 16.0 0.054 0.059
3/8 10 17.6 18.0 11.8 13.3 4.01 3.50 9.5 6.5 17.5 0.073 0.082
1/2 15 21.8 22.2 15.0 16.6 4.67 4.09 9.5 9.5 22.5 0.109 0.145
3/4 20 27.2 27.6 20.2 21.7 4.90 4.27 12.5 9.5 24.0 0.177 0.209
1 25 33.9 34.3 25.9 27.4 5.69 4.98 12.5 12.5 28.5 0.259 0.340
1-1/4 32 42.7 43.1 34.3 35.8 6.07 5.28 12.5 12.5 30.0 0.408 0.562
1-1/2 40 48.8 49.2 40.1 41.6 6.35 5.54 12.5 12.5 32.0 0.472 0.603
2 50 61.2 61.7 51.7 53.3 6.93 6.04 16.0 19.0 41.0 0.812 1.080
2-1/2 65 73.9 74.4 61.2 64.2 8.76 7.67 16.0 19.0 43.0 1.098 1.610
3 80 89.8 90.3 76.4 79.4 9.52 8.30 16.0 19.0 44.5 1.842 2.830
4 100 115.2 115.7 100.7 103.8 10.69 9.35 19.0 19.0 48.0 2.599 3.765

Socket Weld Flange Wall Thickness

Socket Weld Flange Thickness

Normal Pipe Sizes Outside Daimeter SCH 10 SCH 20 SCH 30 STD Wall SCH 40 SCH 60 EXT Hvy SCH 80 SCH 100 SCH 120 SCH 140 SCH 160 XX Hvy
¾ 1.05 0.083 - - 0.113 0.113 - 0.154 0.154 - - - 0.219 0.308
1 1.315 0.109 - - 0.133 0.133 - 0.179 0.179 - - - 0.25 0.358
½ 0.84 0.083 - - 0.109 0.109 - 0.147 0.147 - - - 0.188 0.294
1 ¼ 1.66 0.109 - - 0.14 0.14 - 0.191 0.191 - - - 0.25 0.382
1 ½ 1.9 0.109 - - 0.145 0.145 - 0.2 0.2 - - - 0.281 0.4
2 ½ 2.875 0.12 - - 0.203 0.203 - 0.276 0.276 - - - 0.375 0.552
3 3.5 0.12 - - 0.216 0.216 - 0.3 0.3 - - - 0.438 0.6
3 ½ 4 0.12 - - 0.226 0.226 - 0.318 0.318 - - - - 0.636
2 2.375 0.109 - - 0.154 0.154 - 0.218 0.218 - - - 0.344 0.436
4 4.5 0.12 - - 0.237 0.237 - 0.337 0.337 - 0.438 - 0.531 0.674
6 6.625 0.134 - - 0.28 0.28 - 0.432 0.432 - 0.562 - 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
5 5.563 0.134 - - 0.258 0.258 - 0.375 0.375 - 0.5 - 0.625 0.75
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 -
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 -
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 -
22 22 0.25 - - 0.375 - - 0.5 - - -. -. -. -.
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 -
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 -.
26 26 -. -. -. 0.375 -. -. 0.5 -. -. -. -. -. -.
30 30 0.312 0.5 0.625 0.375 -. -. 0.5 -. -. -. -. -. -.
36 36 0.312 0.5 0.625 0.375 0.75 -. 0.5 -. -. -. -. -. -.
48 48 - - - 0.375 - - 0.5 - - - - - -
40 40 -. -. -. 0.375 -. -. 0.5 -. -. -. -. -. -.
42 42 - - - 0.375 - - 0.5 - - - - - -

SS Socket Weld Flange Weight Chart

Get free quote of A694 Socket Weld Ring Joint Flange, Inconel 625 SW Orifice Flange, Check ASME B16.5 SWRF Flanges Class 150 Dimensions and SS Socket Weld Flange Application
Nominal Size Outside Diameter Thickness of Flanges Diameter of Raised Face Diameter of Hub at Base Length Thru Hub Diameter of Bore Depth of Socket No. of Holes Diameter of Holes Diameter of Bolts Diameter of Bolt Circle Approx Weight Pounds Kg
O C R X Y B D
1/2" in. 3.5 0.44 1.38 1.19 0.62 0.88 0.38 4 0.62 1/2 2.38 1
mm. 88.9 11.2 35.1 30.2 15.7 22.4 9.7 15.7 12.7 60.5 0.5
3/4" in. 3.88 0.5 1.69 1.5 0.62 1.09 0.44 4 0.62 1/2 2.75 2
mm. 98.6 12.7 42.9 38.1 15.7 27.7 11.2 15.7 12.7 69.9 1
1" in. 4.25 0.56 2 1.94 0.69 1.36 0.5 4 0.62 1/2 3.12 2
mm. 108 14.2 50.8 49.3 17.5 34.5 12.7 15.7 12.7 79.2 1
1 1/4" in. 4.62 0.62 2.5 2.31 0.81 1.7 0.56 4 0.62 1/2 3.5 3
mm. 117.3 15.7 63.5 58.7 20.6 43.2 14.2 15.7 12.7 88.9 1
1 1/2" in. 5 0.69 2.88 2.56 0.88 1.95 0.62 4 0.62 1/2 3.88 3
mm. 127 17.5 73.2 65 22.4 49.5 15.7 15.7 12.7 98.6 1
2" in. 6 0.75 3.62 3.06 1 2.44 0.69 4 0.75 5/8 4.75 5
mm. 152.4 19.1 91.9 77.7 25.4 62 17.5 19.1 15.9 120.7 2
2 1/2" in. 7 0.88 4.12 3.56 1.12 2.94 0.75 4 0.75 5/8 5.5 7
mm. 177.8 22.4 104.6 90.4 28.4 74.7 19.1 19.1 15.9 139.7 3
3" in. 7.5 0.94 5 4.25 1.19 3.57 0.81 4 0.75 5/8 6 8
mm. 190.5 23.9 127 108 30.2 90.7 20.6 19.1 15.9 152.4 4
3 1/2" in. 8.5 0.94 5.5 4.81 1.25 4.07   8 0.75 5/8 7 11
mm. 215.9 23.9 139.7 122.2 31.8 103.4   19.1 15.9 177.8 5
4" in. 9 0.94 6.19 5.31 1.31 4.57   8 0.75 5/8 7.5 13
mm. 228.6 23.9 157.2 134.9 33.3 116.1   19.1 15.9 190.5 6
5" in. 10 0.94 7.31 6.44 1.44 5.66   8 0.88 3/4 8.5 15
mm. 254 23.9 185.7 163.6 36.6 143.8   22.4 19.1 215.9 7
6" in. 11 1 8.5 7.56 1.56 6.72   8 0.88 3/4 9.5 19
mm. 279.4 25.4 215.9 192 39.6 170.7   22.4 19.1 241.3 9
8" in. 13.5 1.12 10.62 9.69 1.75 8.72   8 0.88 3/4 11.75 30
mm. 342.9 28.4 269.7 246.1 44.5 221.5   22.4 19.1 298.5 14
10" in. 16 1.19 12.75 12 1.94 10.88   12 1 7/8 14.25 43
mm. 406.4 30.2 323.9 304.8 49.3 276.4   25.4 22.2 362 20
12" in. 19 1.25 15 14.38 2.19 12.88   12 1 7/8 17 64
mm. 482.6 31.8 381 365.3 55.6 327.2   25.4 22.2 431.8 29
14" in. 21 1.38 16.25 15.75 2.25 14.14   12 1.12 1 18.75 90
mm. 533.4 35.1 412.8 400.1 57.2 359.2   28.4 25.4 476.3 41
16" in. 23.5 1.44 18.5 18 2.5 16.16   16 1.12 1 21.25 98
mm. 596.9 36.6 469.9 457.2 63.5 410.5   28.4 25.4 539.8 44
18" in. 25 1.56 21 19.88 2.69 18.18   16 1.25 1 1/8 22.75 130
mm. 635 39.6 533.4 505 68.3 461.8   31.8 28.6 577.9 59
20" in. 27.5 1.69 23 22 2.88 20.2   20 1.25 1 1/8 25 165
mm. 698.5 42.9 584.2 558.8 73.2 513.1   31.8 28.6 635 75
24" in. 32 1.88 27.25 26.12 3.25 24.25   20 1.38 1 1/4 29.5 220
mm. 812.8 47.8 692.2 663.4 82.6 616   35.1 31.8 749.3 100

Socket Weld Flange Application

  • Sugar Industries
  • Food Processing Industries
  • Petrochemical Industries
  • Chemical Industries
  • Oil & Gas Industries
  • Gas Processing Industries
  • Fertilizers Industries
  • Power Generation Industries

Know what exactly we supply and where it goes

Products We supplied to following Locations
Sa A105 Socket Welding Neck Flange Germany, Malaysia, Czechia, Thailand
Socket Welding 3000 Psi Flange Indonesia, Belgium, Dammam -KSA, Philippines
Sw Socket Welding Flange 38 Inch Hastelloy C276 Plate Flange France, Thailand, Qatar, Europe
Stainless Steel 1 Inch Sw Socket Welding Flange Italy, Singapore, Chile, Iran
Dn250 Stainless Steel Socket Weld Flanges USA, Finland, Malaysia, Bangladesh
Ansi B16.5 Class150lbs Stainless Steel Socket Weld Raised Face Sch40s Flanges Canada, Ellington -United States, UK, Poland
Stainless Steel Adapter Socket Weld Welding Neck Flanges Saudi Arabia (KSA), Brazil, South Africa, Kuwait
Plastic Hdpe Socket Fittings 75mm Stub Flanges South Africa, Singapore, Bahrain, Singapore
Forged Stainless Steel Socket Weld Flanges Australia, Nigeria, Philippines, UK
3000psi 6000psi Socket Weld Hydraulic Flanges Malaysia, UAE, Oman, Hong Kong
Din Stainless Steel 304 316 316l Forged Pn 16 Socket Weld Flanges Turkey, Malaysia, United Arab Emirates (UAE), Norway
Class150 B16.5 Carbon Steel Sa A105 Socket Welding Flanges Malaysia, Dubai, Netherlands, Russia
Carbon Steel Forged Astm A105 Socket Welding Flange Spain, UK, Egypt, Mexico
Socket Din 2633 Pn16 Flange Europe, UAE, United Kingdom -UK, Malaysia
Din 2533 Pn16 Socket Welding Flange Malaysia, Singapore, Philippines, Canada
Stainless Steel Sae Socket Weld Flange Japan, Malaysia, Europe, Romania
Stainless Steel 304/316 2inch Class150 Socket Weld Flange Colombia, China, Sweden, Malaysia
8 Holes Socket Welding Flange Taiwan, Philippines, Malaysia, Los Alamos -Mexico
Titanium Socket Weld Flanges South Korea, Malaysia, Singapore, NY 12203 (USA)