Copper is a very ductile material with several attractive properties including high ductility and good conductivity to both heat and electricity. With a unique pink-orangeish tint, these fasteners are also produced by copper bolts manufacturers for decorative purposes. Since the material is ductile, it could be shaped into various fasteners including washers as well as threaded copper bolts and nuts.
In an alloyed form, their ductility is reduced, yielding a tougher fastener with higher mechanical properties including higher strength and improved hardness. Yet, the properties inherited by the copper alloy bolts will depend on their chemical composition and the treatment performed on the alloy. From being used in architecture to marine environments, its natural color makes a wonderful addition across several applications in building and construction. Like other decorative fasteners, it is possible to coat them with paints to get a different color. The layer of color added on the Copper Colored Bolt not only makes them attractive but also offers a small level of resistance to corrosion. Resistance to corrosion is an important characteristic needed in many applications. Since the material is resilient to the effects of seawater, the m5 copper bolts make a fitting addition to boats or yachts. Naturally resistant to microorganisms and bacterial, these fasteners work well against lichen, moss, and algae. Copper is a material that could be used at high temperatures and is often used in applications to conduct heat. Often the Copper Bolts Nuts Washers are used in applications that are likely to get attached by bacterial. And as a natural bacteriostatic material, with moderate strength and good resistance to corrosion, copper anchor bolts are favored across several industries including plumbing, architecture, and construction as well as shipbuilding.
Standards | ANSI, DIN, BS, ASME, UNI, ASTM ISO, JIS, IS, GB |
Thread | BSW, METRIC, BSF, UNC, UNF |
Length in MM | 3 - 200 |
Nut & Bolt Sizes in Inch | M3 - M56 3/6 - 2 |
Screws Size | M1.6 - M12 |
Washers Size in Inch | M3 - M56 3/6 - 2 |
Supplier and Distributors Located in | Gurgaon, Ankara, Port of Spain, Calgary, Abu Dhabi, Coimbatore, Courbevoie, Bengaluru, Santiago, Surat, Kanpur, Vadodara, Istanbul, Gimhae si, Ahvaz, Melbourne, Kuwait, Ludhiana, New Delhi, Ludhiana, Ranchi, Tau, Khobar, Muscat, Bangalore, Caracas, Jamshedpur, Chennai, Montreal, Baroda, Pimpri Chinchwad, Manama, Tehran, Kolkata, Indore, Thiruvananthapuram, Bogota, Noida, Lagos, London, Mumbai, Sydney, Janeiro, Ernakulam, Hyderabad, Riyadh, Dammam, Howrah, Gujarat, India, Mexico, Perth, Karachi, Nagpur, Rajkot, Ahmedabad |
---|
Element | Copper | Silver | Bismuth | Oxygen | Phosphorus | Lead | Other elements | |
Total | Excluding | |||||||
Minimum Maximum |
99,90(1) – |
– – |
– 0,0005 |
– 0,040(2) |
– – |
– 0,005 |
– 0,03 |
Ag. O |
Minimum Maximum |
99,90(1) – |
– – |
– – |
– 0,040(2) |
– – |
– – |
– 0,04 |
Ag. O |
Minimum Maximum |
99,95(1) – |
– – |
– 0,0005 |
– -(3) |
– – |
– 0,005 |
– 0,03 |
Ag. |
Minimum Maximum |
Balance – |
0,03 0,05 |
– 0,0005 |
– 0,040 |
– – |
– – |
– 0,03 |
Ag. O |
Minimum Maximum |
Balance – |
0,06 0,08 |
– 0,0005 |
– 0,040 |
– – |
– – |
– 0,03 |
Ag. O |
Minimum Maximum |
Balance – |
0,08 0,12 |
– 0,0005 |
– 0,040 |
– – |
– – |
– 0,03 |
Ag. O |
Minimum Maximum |
Balance – |
0,03 0,05 |
– 0,0005 |
– -(3) |
0,001 0,007 |
– – |
– 0,03 |
Ag. P |
Minimum Maximum |
Balance – |
0,06 0,08 |
– 0,0005 |
– -(3) |
0,001 0,007 |
– – |
– 0,03 |
Ag. P |
Minimum Maximum |
Balance – |
0,08 0,12 |
– 0,0005 |
– -(3) |
0,001 0,007 |
– – |
– 0,03 |
Ag. P |
Minimum Maximum |
Balance – |
0,03 0,05 |
– 0,0005 |
– -(3) |
– – |
– – |
– 0,0065 |
Ag. O |
Minimum Maximum |
Balance – |
0,06 0,08 |
– 0,0005 |
– -(3) |
– – |
– – |
– 0,0065 |
Ag. O |
Minimum Maximum |
Balance – |
0,08 0,12 |
– 0,0005 |
– -(3) |
– – |
– – |
– 0,0065 |
Ag. O |
Minimum Maximum |
99,95(1) – |
– – |
– 0,0005 |
– -(3) |
0,001 0,006 |
– 0,005 |
– 0,03 |
Ag. P |
Minimum Maximum |
99,95(1) – |
– – |
– 0,0005 |
– -(3) |
0,002 0,007 |
– 0,005 |
– 0,03 |
Ag. P |
Minimum Value | Maximum Value | Units | Minimum Value | Maximum Value | Units |
---|---|---|---|---|---|
0.0071 | 0.0073 | m3/kmol | 433.268 | 445.473 | in3/kmol |
8.93 | 8.94 | Mg/m3 | 557.482 | 558.106 | lb/ft3 |
100 | 130 | MJ/kg | 10833.9 | 14084 | kcal/lb |
130 | 145 | GPa | 18.8549 | 21.0305 | 106 psi |
45 | 330 | MPa | 6.5267 | 47.8625 | ksi |
0.04 | 0.5 | 0.04 | 0.5 | NULL | |
45 | 330 | MPa | 6.5267 | 47.8625 | ksi |
70 | 140 | MPa | 10.1526 | 20.3053 | ksi |
40 | 100 | MPa.m1/2 | 36.4019 | 91.0047 | ksi.in1/2 |
400 | 1150 | MPa | 58.0151 | 166.793 | ksi |
3.5e-005 | 0.002 | 3.5e-005 | 0.002 | NULL | |
45 | 330 | MPa | 6.5267 | 47.8625 | ksi |
0.34 | 0.35 | 0.34 | 0.35 | NULL | |
44 | 49 | GPa | 6.38166 | 7.10685 | 106 psi |
210 | 390 | MPa | 30.4579 | 56.5647 | ksi |
121 | 133 | GPa | 17.5496 | 19.29 | 106 psi |
K | °F | ||||
200 | 210 | kJ/kg | 85.9841 | 90.2833 | BTU/lb |
350 | 400 | K | 170.33 | 260.33 | °F |
1320 | 1355 | K | 1916.33 | 1979.33 | °F |
0 | 0 | K | -459.67 | -459.67 | °F |
372 | 388 | J/kg.K | 0.287875 | 0.300257 | BTU/lb.F |
147 | 370 | W/m.K | 275.189 | 692.652 | BTU.ft/h.ft2.F |
16.8 | 17.9 | 10-6/K | 30.24 | 32.22 | 10-6/°F |
MV/m | V/mil | ||||
NULL | |||||
1.82 | 4.9 | 10-8ohm.m | 1.82 | 4.9 | 10-8 ohm.m |
British Standard Equivalent | Designation Of European Material | Copper Description |
---|---|---|
C101 | CW004A | Copper ETP |
C101 | CW012A | Copper Ag 0.06 - 0.08 |
C101 | CW011A | Copper Ag 0.03 - 0.05 |
C111 | CW114C | Copper (added sulphur) |
C101 | CW013A | Copper Ag 0.08 - 0.012 |
C109 | CW118C | Copper (added tellurium) |
C103 | CW008A | Oxygen free Copper |
C110 | CW009A | Oxygen free Copper |
Copper Alloy Bolts
Copper Alloy Anchor Bolts
Copper Eye Bolts
Astm F467 C12200 Copper Flange Bolts
Copper Hex Bolts
Uns C11000 Lag Bolts
Pure Copper Hex Nut
Copper Flange Nuts
UNS C12200 Lug Nuts
M8 Copper Lock Nuts
Copper Wing Nuts
ASTM F467 UNS C11000 Acorn Nuts
Copper Stud Bolt
UNS C11000 Tie Rod
Cu Alloy Threaded Rod
Copper Fully Threaded Studs
UNS C12200 Double Ended Studs
110 Copper Stud Bolts
Copper Screws
UNS C11000 Wood Screws
Copper Hex Screw
110 Copper Deck Screws
UNS C12200 Machine Screws
Cu Alloy Flat Head Screws
Copper lock washer
CU Alloy flat washer
ASTM F467 UNS C11000 belleville washer
Copper Washer
UNS C12200 fender washer
ASTM F467 Cu Split lock
Nut Size in MM | Diameter in Mm | Height in MM | ||
---|---|---|---|---|
Hex Nut | Jam Nut | Nylock Nut | ||
2 | 4 | 1.6 | 1.2 | - |
2.5 | 5 | 2 | 1.6 | - |
3 | 5.5 | 2.4 | 1.8 | 4 |
4 | 7 | 3.2 | 2.2 | 5 |
5 | 8 | 4 | 2.7 | 5 |
6 | 10 | 5 | 3.2 | 6 |
7 | 11 | 5.5 | 3.5 | - |
8 | 13 | 6.5 | 4 | 8 |
10 | 17 | 8 | 5 | 10 |
12 | 19 | 10 | 6 | 12 |
14 | 22 | 11 | 7 | 14 |
16 | 24 | 13 | 8 | 16 |
18 | 27 | 15 | 9 | 18.5 |
20 | 30 | 16 | 10 | 20 |
copper fasteners are widely used in industrial applications due to their corrosion-resistance, high strength, conductivity and antimicrobial properties. Copper alloys contain zinc, which increases strength but may decrease corrosion resistance of fasteners.
Description | Price Per Piece in INR | Price Per Piece in USA $ | Price Per Piece in UAE Dirham |
---|---|---|---|
Copper outer hexagon bolt copper screw | INR 7.42 | USA $ 0.10 | AED 0.37 |
Hard drawn brass copper split bolts | INR 37.11 | USA $ 0.50 | AED 1.84 |
copper Hammer Head Forged T Bolt | INR 7.42 | USA $ 0.10 | AED 0.37 |
copper bolts and nuts DIN933 DIN931 | INR 0.74 | USA $ 0.01 | AED 0.037 |
M4 Double Through Hexagonal 5mm-60mm Threaded Copper Stud Bolts | INR 25.23 | USA $ 0.34 | AED 1.25 |
We are well known Copper Bolts Manufacturers in India, We provide following services to our customers
Sizes in Inch | Per Inch Threads | ||
---|---|---|---|
Fractions | Decimal | UNC | UNF |
5/32 | 0.1640 | 32 | 36 |
1/8 | 0.1380 | 32 | 40 |
3/16 | 0.1900 | 24 | 32 |
5/16 | 0.3125 | 18 | 24 |
1/4 | 0.2500 | 20 | 28 |
3/8 | 0.3750 | 16 | 24 |
1/2 | 0.5000 | 13 | 20 |
7/16 | 0.4375 | 14 | 20 |
9/16 | 0.5625 | 12 | 18 |
3/4 | 0.7500 | 10 | 16 |
5/8 | 0.6250 | 11 | 18 |
7/8 | 0.8750 | 9 | 14 |
1 1/8 | 1.1250 | 7 | 12 |
1 | 1.0000 | 8 | 12, 14 |
1 1/4 | 1.2500 | 7 | 12 |
1 1/2 | 1.5000 | 6 | 12 |
1 3/8 | 1.3750 | 6 | 12 |
1 3/4 | 1.7500 | 5 | – |
Length in MM | DIAMETER | |||||||||
M5 | M6 | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M22 | |
20 | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
16 | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
25 | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
35 | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
30 | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
40 | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
50 | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
45 | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
55 | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
65 | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
60 | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
70 | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
80 | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
75 | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
90 | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
110 | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
100 | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
120 | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
140 | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
130 | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
150 | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
170 | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
160 | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
180 | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
200 | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
190 | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
220 | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
250 | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
240 | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
260 | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
300 | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
280 | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
320 | 31.646 | 56.818 | 92.593 | |||||||
360 | 35.211 | 63.291 | 104.167 | |||||||
340 | 33.557 | 60.241 | 98.039 | |||||||
400 | 39.063 | 69.444 | 113.636 | |||||||
380 | 37.037 | 66.667 | 108.696 |
Nominal Size | F | G | H | ||||||
Width Across Flats | Width Across Corners | Thickness | |||||||
Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | |||
1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
7/8 | .8750 | 1 5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
3/4 | .7500 | 1 1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
1 | 1.0000 | 1 1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
1 3/8 | 1.3750 | 2 1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1 11/64 | 1.206 | 1.138 |
1 1/8 | 1.1250 | 1 11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
1 1/2 | 1.500 | 2 1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1 9/32 | 1.ASTM A194 GR. 8 | 1.245 |
1 3/4 | 1.7500 | 2 5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1 1/2 | 1.540 | 1.460 |
1 5/8 | 1.6250 | 2 7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1 25/64 | 1.429 | 1.353 |
2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1 23/32 | 1.763 | 1.675 |
2 1/2 | 2.5000 | 3 3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2 5/32 | 2.209 | 2.105 |
2 1/4 | 2.2500 | 3 3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1 15/16 | 1.986 | 1.890 |
2 3/4 | 2.7500 | 4 1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2 3/8 | 2.431 | 2.319 |
Sample Packing
Bubble Wrap Packing
Box Packing
Bolt Size in Inch | Threads Per Inch | Standard Dry Torque in Inch-Pounds | |||||
#2 | 56 | 2.5 | 2.6 | ||||
64 | 3.0 | 3.2 | |||||
#3 | 48 | 3.9 | 4.0 | ||||
56 | 4.4 | 4.6 | |||||
#4 | 40 | 5.2 | 5.5 | ||||
48 | 6.6 | 6.9 | |||||
#5 | 40 | 7.7 | 8.1 | ||||
44 | 9.4 | 9.8 | |||||
#6 | 32 | 9.6 | 10.1 | ||||
40 | 12.1 | 12.7 | |||||
#8 | 32 | 19.8 | 20.7 | ||||
36 | 22.0 | 23.0 | |||||
#10 | 24 | 22.8 | 23.8 | ||||
32 | 31.7 | 33.1 | |||||
1/4 | 20 | 75.2 | 78.8 | ||||
28 | 94.0 | 99.0 | |||||
5/16 | 18 | 132 | 138 | ||||
24 | 142 | 147 | |||||
3/8 | 16 | 236 | 247 | ||||
24 | 259 | 271 | |||||
7/16 | 14 | 376 | 393 | ||||
20 | 400 | 418 | |||||
1/2 | 13 | 517 | 542 | ||||
20 | 541 | 565 | |||||
9/16 | 12 | 682 | 713 | ||||
18 | 752 | 787 | |||||
5/8 | 11 | 1110 | 1160 | ||||
18 | 1244 | 1301 | |||||
3/4 | 10 | 1530 | 1582 | ||||
16 | 1490 | 1558 | |||||
7/8 | 9 | 2328 | 2430 | ||||
14 | 2318 | 2420 | |||||
1 | 8 | 3440 | 3595 | ||||
14 | 3110 | 3250 | |||||
1 1/8 | 7 | 413 | 432 | ||||
12 | 390 | 408 | |||||
1 1/4 | 7 | 523 | 546 | ||||
12 | 480 | 504 | |||||
1 1/2 | 6 | 888 | 930 | ||||
12 | 703 | 732 |
Melting Point | °F | °C |
---|---|---|
Copper Bolts | 1983 | 1084 |
Sizes | USS | SAE | ||||
Outer Diameter | Inner Diameter | Thickness | Outer Diameter | Inner Diameter | Thickness | |
1/8 (#6) | 0.375 | 0.156 | .036/.065 | |||
5/32 (#8) | 0.438 | 0.188 | .036/.065 | |||
3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
7/32 (#12) | 0.562 | 0.250 | .051/.080 | |||
1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
1 5/8 | 3.750 | 1.750 | .153/.213 | |||
1 3/4 | 4.000 | 1.875 | .153/.213 | |||
1 7/8 | 4.250 | 2.000 | .153/.213 | |||
2 | 4.500 | 2.125 | .153/.213 | |||
2 1/4 | 4.750 | 2.375 | .320/.248 | |||
2 1/2 | 5.000 | 2.625 | .210/.280 | |||
2 3/4 | 5.250 | 2.875 | .228/.410S | |||
3 | 5.500 | 3.125 | .249/.327 |
Size | Inside Diameter in inch | Outside Diameter in inch | Thickness in inch |
---|---|---|---|
4 | 1/8 | 5/16 | 1/32 |
2 | 3/32 | 1/4 | .020 |
6 | 5/32 | 3/8 | 3/64 |
10 | 7/32 | 1/2 | 3/64 |
8 | 3/16 | 7/16 | 3/64 |
1/4 | 9/32 | 5/8 | 1/16 |
3/8 | 13/32 | 13/16 | 1/16 |
5/16 | 11/32 | 11/16 | 1/16 |
7/16 | 15/32 | 59/64 | 1/16 |
9/16 | 19/32 | 1 3/16 | 3/32 |
1/2 | 17/32 | 1 1/16 | 3/32 |
5/8 | 21/32 | 1 5/16 | 3/32 |
7/8 | 15/16 | 1 3/4 | 9/64 |
3/4 | 13/16 | 1 1/2 | 9/64 |
1 | 1 1/16 | 2 | 9/64 |
1 1/4 | 1 5/16 | 2 1/2 | 5/32 |
1 1/8 | 1 3/16 | 2 1/4 | 9/64 |
1 1/2 | 1 7/16 | 3 | 3/16 |
1 3/4 | 1 7/8 | 4 | 3/16 |
1 5/8 | 1 3/4 | 3 3/4 | 3/16 |
2 | 2 1/8 | 4 1/2 | 3/16 |
Products | We supplied to following Locations |
---|---|
Copper outer hexagon bolt copper screw | South Africa, Kuwait, Brazil, Saudi Arabia |
Hard drawn brass copper split bolts | Nigeria, Australia, Philippines, UK |
Copper Stud Bolt with Nut and Washer M2-M30 | Malaysia, Hong Kong, Oman, UAE |
copper Hammer Head Forged T Bolt | Singapore, Bahrain, South Africa |
copper hex bolt DIN933 | Italy, Iran, Chile, Singapore |
Customized Copper Barrel Bolt With Center Hole | Turkey, Norway, Malaysia, United Arab Emirates |
copper bolts and nuts DIN933 DIN931 | Dammam -KSA, Belgium, Philippines, Indonesia. |
Copper Alloy Bolt Cap Hex Head Bolts | Canada, Malaysia, Philippines, Singapore |
copper M4 Double Through Hexagonal 5mm-60mm Threaded Copper Stud Bolts | Europe, Romania, Japan, Malaysia |
copper DIN315 High Strength Brass Copper Wing Nut | Colombia, Sweden, China, Malaysia |
din 603 large half round head copper carriage bolts | Netherlands, Russia, Dubai, Malaysia |
m20 copper socket bolt m6 steel thread hollow screw | Egypt, UK, Mexico, Spain |
Copper brass m6x1 hex bolt with nut and washer m12x40mm bolt | Ellington -United States, Poland, Canada, UK |
DIN 933 Copper Brass Hex Head Bolt M6 | United Kingdom -UK, Europe, UAE, Malaysia |
copper T head screw bolt | Thailand, Europe, France, Qatar |
copper DIN933 All sizes M3 brass copper bronze hex bolt | Czechia, Malaysia, Germany, Thailand |
ISO13918 steel copper plated weld bolt | Finland, USA, Bangladesh, Malaysia |