M10 Flat Washer & DIN125 Plain Waasher manufacturer in India
Stainless steel alloys, especially those belonging to the authentic class are very ductile. Therefore, they could be formed into various shapes, while also retaining their toughness and other mechanical properties. Grades like the SS 304 flat Washer are popular because they are easily found and are relatively inexpensive in comparison to many high-end metals. Their tensile strength properties range between moderate to high, depending on the environment they are used in. Generally, a bolt and nut fastening component is combined with a plain washer. And although there are several reasons to use these devices, the thought behind using them is because of their usefulness in the distribution of load.
Threaded fasteners like nuts and bolts, while offering a good grip, could cause damage to the surface of the material they are being fastened to. Moreover, the load taken covers only a small surface area (area of the bolt and nut). Hence, when a 3 inch flat washer is used, the surface area automatically increases, and the stress is evenly distributed. In an application where the surface area is low, the chances of the operation failing are high. In addition to bearing stresses, the flat rubber washers absorb shocks and vibrations, which would be the cause of the nut and bolt getting unfastened to a material. For safety reasons, most stainless steel flat washer manufacturers recommend using this device in assemblies where vibrations are a state of constant. Although stainless steel alloys offer a lot, with regards to their mechanical and corrosion resistance properties. Using a softer material like rubber, plastic or even nylon flat washers would be better at absorbing shocks by vibrations. Just like some of these components dampen vibration, it is possible to prevent the penetration of any liquid in the assembly with the use of large flat washers.
Ready Stock of Fender Washer, Plain Washers, Large Flat Washers, Thick Washers, Sae Washer, F436 Flat Washer in Mumbai, India
Stainless Steel Flat Washers Specification Schedule
Buy 316 Stainless Steel Plain Washers, 3 Inch Flat Washer at best price, Check Fender Washer, M8 Flat Washer Size Chart
| Specifications | ASME SA193 ASTM A193 Flat Washers |
| Standard | ASTM, DIN, BS and all Standards |
| Length | M02 - M33 |
| Size | 3 - 200 MM |
| Supplier and Distributors Located in | Bogota, Courbevoie, Coimbatore, Bangalore, Kanpur, Jamshedpur, Perth, Abu Dhabi, Bengaluru, Kolkata, Hyderabad, Karachi, Kuwait, Ahvaz, Baroda, Surat, Port of Spain, Dammam, Ernakulam, Ranchi, Melbourne, Howrah, Rajkot, Calgary, Ludhiana, Sydney, Gurgaon, Chennai, Manama, Ahmedabad, Mumbai, Janeiro, Vadodara, Thiruvananthapuram, Caracas, Riyadh, Gimhae si, Muscat, Santiago, Pimpri Chinchwad, Ludhiana, Lagos, Montreal, Tehran, Ankara, India, Nagpur, London, Mexico, Noida, Indore, Gujarat, New Delhi, Khobar, Istanbul |
|---|
M10 SS 316 Thick Plain Washer Types
Din125a Gi Washer Galvanized Flat Washer
Din125 Stainless Steel M3 M4 M5 M6 M8 Flat Washer
Stainless Steel 304 316 Square Flat Spring Washer
Ss316 Din125a M6 Flat Washer
Din1440 Stainless Steel Metal Flat Washer
0.05mm Ultra Thin Stainless Steel Flat Washers
Din125 Din433 Round Flat Washer M4 M6 10mm
Plastic Nylon M5 Black Flat Washer
Carbon Steel Zinc Plated Flat Washer Din125a
Din125 Stainless Steel 304 316 Thin Flat Washer
Aluminum Fender Flat Washers
Aluminium Washer Din125 Flat Copper Washer
DIN125 Flat Washer Dimension Chart
We are Stainless Steel Flat Washers Suppliers, View Stainless Steel Fender Washers Size Chart, Call for Material test certificate and sample of 316 SS Plain Washers, M8 Threaded Flat Washer
| Size | Inside Diameter | Outside Diameter | Thickness |
|---|---|---|---|
| #2 | 3/32" | 1/4" | .020" |
| #4 | 1/8" | 5/16" | 1/32" |
| #8 | 3/16" | 7/16" | 3/64" |
| #10 | 7/32" | 1/2" | 3/64" |
| #6 | 5/32" | 3/8" | 3/64" |
| 1/4 | 9/32" | 5/8" | 1/16" |
| 3/8 | 13/32" | 13/16" | 1/16" |
| 7/16 | 15/32" | 59/64" | 1/16" |
| 1/2 | 17/32" | 1-1/16" | 3/32" |
| 9/16 | 19/32" | 1-3/16" | 3/32" |
| 5/16 | 11/32" | 11/16" | 1/16" |
| 1-3/4 | 1-7/8" | 4" | 3/16" |
| 5/8 | 21/32" | 1-5/16" | 3/32" |
| 3/4 | 13/16" | 1-1/2" | 9/64" |
| 7/8 | 15/16" | 1-3/4" | 9/64" |
| 1" | 1-1/16" | 2" | 9/64" |
| 1-1/8 | 1-3/16" | 2-1/4" | 9/64" |
| 1-1/4 | 1-5/16" | 2-1/2" | 5/32" |
| 1-1/2 | 1-7/16" | 3" | 3/16" |
| 1-5/8 | 1-3/4" | 3-3/4" | 3/16" |
| 2 | 2-1/8" | 4-1/2" | 3/16" |
316 Stainless Steel Plain Washers Dimension
| Size | Inside Diameter | Outside Diameter | Thickness |
|---|---|---|---|
| 3/16 | 1/4" | 9/16" | 3/64" |
| 1/4 | 5/16" | 3/4" | 1/16" |
| 3/8 | 7/16" | 1" | 5/64" |
| 7/16 | 1/2" | 1-1/4" | 5/64" |
| 1/2 | 9/16" | 1-3/8" | 7/64" |
| 9/16 | 5/8" | 1-1/2" | 7/64" |
| 5/8 | 11/16" | 1-3/4" | 9/64" |
| 3/4 | 13/16" | 2" | 5/32" |
| 5/16 | 3/8" | 7/8" | 5/64" |
| 7/8 | 15/16" | 2-1/4" | 1/64" |
| 1 | 1-1/16" | 2-1/2" | 11/64" |
| 1-1/8 | 1-1/4" | 2-3/4" | 11/64" |
| 1-1/4 | 1-3/8" | 3" | 11/64" |
| 1-3/8 | 1-1/2" | 3-1/4" | 3/16" |
| 1-5/8 | 1-3/4" | 3-3/4" | 3/16" |
| 1-3/4 | 1-7/8" | 4" | 3/16" |
| 2 | 2-1/8" | 4-1/2" | 3/16" |
| 2-1/2 | 2-5/8" | 4-1/2" | 3/16" |
| 3 | 3-1/8" | 5-1/2" | 9/32" |
| 1-1/2 | 1-5/8" | 3-1/2" | 3/16" |
Sizes of Stainless Steel Flat Washers
ISO High Temperature Flat Washer Manufacturers in India, View M6 Flat Washer, DIN 125 Thick Flat Washers Dimension, and M10 SS 316 Thick Plain Washer Weight Chart
| Size | Inside Diameter | Outside Diameter | Thickness |
|---|---|---|---|
| M1 | 1.1mm | 3.2mm | 0.3mm |
| M1.2 | 1.3mm | 3.8mm | 0.3mm |
| M1.4 | 1.5mm | 3.8mm | 0.3mm |
| M2 | 2.2mm | 5.0mm | 0.3mm |
| M2.5 | 2.7mm | 6.0mm | 0.5mm |
| M3 | 3.2mm | 7.0mm | 0.5mm |
| M3.5 | 3.7mm | 8.0mm | 0.5mm |
| M4 | 4.3mm | 9.0mm | 0.8mm |
| M1.6 | 1.7mm | 4.0mm | 0.3mm |
| M5 | 5.3mm | 10mm | 1mm |
| M6 | 6.4mm | 12mm | 1.6mm |
| M7 | 7.4mm | 14mm | 1.6mm |
| M8 | 8.4mm | 16mm | 1.6mm |
| M11 | 12mm | 24mm | 2.5mm |
| M12 | 13mm | 24mm | 2.5mm |
| M14 | 15mm | 28mm | 2.5mm |
| M16 | 17mm | 30mm | 3.0mm |
| M18 | 19mm | 34mm | 3.0mm |
| M10 | 10.5mm | 20mm | 2.0mm |
| M20 | 21mm | 37mm | 3.0mm |
High Temperature Flat Washer Size chart
| Bolt Size | Outside Diameter | Inside Diameter | Thickness | Approx Lbs per M Pcs | Approx Pcs per Carton |
|---|---|---|---|---|---|
| 3/16 | .563 | .250 | .036/.065 | 2.8 | 18,050 |
| 1/4 | .734 | .313 | .051/.080 | 6.7 | 7,450 |
| 5/16 | .875 | .375 | .064/.104 | 11.5 | 4,350 |
| 3/8 | 1.000 | .438 | .064/.104 | 14.9 | 3,350 |
| 7/16 | 1.250 | .500 | .064/.104 | 22 | |
| 1/2 | 1.375 | .563 | .086/.132 | 38.5 | 1,300 |
| 9/16 | 1.469 | .625 | .086/.132 | 45.5 | 1,100 |
| 5/8 | 1.750 | .688 | .108/.160 | 77 | 650 |
| 3/4 | 2.000 | .813 | .122/.177 | 110 | 455 |
| 7/8 | 2.250 | .938 | .136/.192 | 154 | 325 |
| 1 | 2.500 | 1.063 | .136/.192 | 188 | 265 |
| 1-1/8 | 2.750 | 1.250 | .136/.192 | 222 | 225 |
| 1-1/4 | 3.000 | 1.375 | .136/.192 | 263 | 190 |
| 1-3/8 | 3.250 | 1.500 | .153/.213 | 333 | 150 |
| 1-1/2 | 3.500 | 1.625 | .153/.213 | 385 | 130 |
| 1-5/8 | 3.750 | 1.750 | .153/.213 | 435 | 115 |
| 1-3/4 | 4.000 | 1.875 | .153/.213 | 500 | 100 |
| 1-7/8 | 4.250 | 2 | .153/.213 | 555 | 90 |
| 2 | 4.500 | 2.125 | .153/.213 | 633 | 79 |
| 2-1/4 | 4.750 | 2.375 | .193/.248 | 833 | 60 |
| 2-1/2 | 5.000 | 2.625 | .210/.280 | 961 | 52 |
| 2-3/4 | 5.250 | 2.875 | .228/.310 | 1111 | 45 |
| 3 | 5.500 | 3.125 | .249/.327 | 1281 | 39 |
Weight Chart M8 Flat Washer
| Bolt Size | Inner Diameter | Outer Diameter) | Thickness | Approx LBs per 1000 | Approx Pcs per 50 lb Carton | Approx Pcs per LB |
|---|---|---|---|---|---|---|
| #6 | 5/32 | 3/8 | .036/.065 | 1.26 | 39,500 | 790 |
| #8 | 3/16 | 7/16 | .036/.065 | 1.7 | 29,500 | 585 |
| #10 | 7/32 | 1/2 | .036/.065 | 2.3 | 22,750 | 435 |
| #12 | 1/4 | 9/16 | .051/.080 | 3.4 | 14,700 | 280 |
| 1/4 | 9/32 | 5/8 | .051/.080 | 4.5 | 11,100 | 222 |
| 5/16 | 11/32 | 11/16 | .051/.080 | 5.2 | 9,750 | 192 |
| 3/8 | 13/32 | 13/16 | .051/.080 | 7.2 | 7,000 | 140 |
| 7/16 | 15/32 | 59/64 | .051/.080 | 9.5 | 5,500 | 105 |
| 1/2 | 17/32 | 1 1/16 | .074/.121 | 18.3 | 2,800 | 55 |
| 9/16 | 19/32 | 1 5/32 | .074/.121 | 23.4 | 2,250 | 43 |
| 5/8 | 21/32 | 1 5/16 | .074/.121 | 27.7 | 1,850 | 36 |
| 3/4 | 13/16 | 1 15/32 | .108/.160 | 47.4 | 1,050 | 21 |
| 7/8 | 15/16 | 1 3/4 | .108/.160 | 63 | 775 | 16 |
| 1 | 1 1/16 | 2 | .108/.160 | 83 | 585 | 12 |
| 1 1/8 | 1 1/4 | 2 1/4 | .108/.160 | 109 | 460 | 9.2 |
| 1 1/4 | 1 3/8 | 2 1/2 | .136/.192 | 160 | 335 | 6.3 |
| 1 3/8 | 1 1/2 | 2 3/4 | .136/.213 | 190 | 275 | 5.25 |
| 1 1/2 | 1 5/8 | 3 | .153/.213 | 240 | 230 | 4.25 |
Best Material supplied in following projects
| Products | We supplied to following Locations |
|---|---|
| Din125a Gi Washer Galvanized Flat Washer | Poland, Canada, Ellington -United States, UK |
| Din125 Stainless Steel M3 M4 M5 M6 M8 Flat Washer | Australia, Philippines, Nigeria, UK |
| Stainless Steel 304 316 Square Flat Spring Washer | Hong Kong, Oman, Malaysia, UAE |
| Ss316 Din125a M6 Flat Washer | Bahrain, Singapore, South Africa |
| Din1440 Stainless Steel Metal Flat Washer | Chile, Singapore, Italy, Iran |
| 0.05mm Ultra Thin Stainless Steel Flat Washers | Norway, Malaysia, Turkey, United Arab Emirates (UAE) |
| Din125 Din433 Round Flat Washer M4 M6 10mm | Belgium, Philippines, Dammam -KSA, Indonesia. |
| Plastic Nylon M5 Black Flat Washer | Malaysia, Philippines, Canada, Singapore |
| Carbon Steel Zinc Plated Flat Washer Din125a | Romania, Japan, Europe, Malaysia |
| Din125 Stainless Steel 304 316 Thin Flat Washer | Sweden, China, Colombia, Malaysia |
| Copper Lead Flat Washers | Russia, Dubai, Netherlands, Malaysia |
| Aluminum Fender Flat Washers | Kuwait, Brazil, South Africa, Saudi Arabia (KSA) |
| Aluminium Washer Din125 Flat Copper Washer | UK, Mexico, Egypt, Spain |
| 2mm-14mm White Black Nylon Plastic Flat Washer | Europe, UAE, United Kingdom -UK, Malaysia |
| 0.01mm To 1.0mm Thickness Shim Flat Washer | Europe, France, Thailand, Qatar |
| F436 Hot Dip Galvanized Harden Flat Washers | Malaysia, Germany, Czechia, Thailand |
| Din9021 Sae Uss Din125a Plain Flat Stainless Steel Washer | USA, Bangladesh, Finland, Malaysia |