P250GH is a grade referred to as boiler steel, which can be used at elevated temperatures. Components including flanges that are to be used for applications where both elevated levels of heat and pressure are present need to be durable. They need to withstand demanding stresses in piping systems. The P250GH Flange is a component that can withstand heat levels as high as a temperature of 450 ℃. This grade is typically hot rolled and the flange is supplied in a normalized condition.
Normalizing the Asme SA P250gh Carbon Steel Class 300 Flange brings about an elevation in its toughness and hardness levels. Since the alloy is used in high temperature and high pressure environments, the chemical composition ensures the alloy delivers a good performance. However, normalizing the P250GH Plate Flange essentially brings up its mechanical properties, while also refining its grains and making them more ductile. In addition to heat treatment by normalizing, it is annealed in order to relieve the residual stresses found in the Low Carbon Steel P250gh Pipe Flanges. Stress relieving them via annealing improves their work-life and makes them more durable, especially since they are used in structural applications. Industries like petrochemical, oil and gas processing, chemical industry as well as nuclear power statins use this structural material. As a type of non-alloy steel, the content of additional elements in the Carbon Steel P250GH Flanges is less than 0.7%. Elements like chromium, copper, nickel, and molybdenum are used to alloy the material in trace quantities. This elemental composition of the material gives the P250gh En 10222-2 Flange a tensile strength that ranges between 410 Mpa - 540 Mpa.
Size Chart | 1/2 inch (15 Nominal Bore) to 48 Inch (1200 Nominal Bore) |
---|---|
Pressure Rating ANSI | Class 600, 900, 150, 2500, 300, 1500 LBS |
Pressure Calculation in DIN | 16, 6, 25, 40, 10 Bar / PN10 PN16 PN6 PN25 PN64 PN40 |
JIS Standards | 5, 10, 16 20, 30, 40, 63 K |
UNI Standards | 6, 10, 16, 25, 40 Bar |
EN Standards | 6, 10, 16, 25, 40 Bar |
Coating | Cold and Hot Dip Galvanized, Anti-rust Paint, Zinc Plated,Oil Black Paint, Yellow Transparent |
Most common types | Screwed, Forged, Threaded, Plate |
Test Certificates | EN 10204/3.1B Raw Materials Certificate Third Party Inspection Report , 100% Radiography Test Report etc |
Production technique | Forged, Heat treated and machined |
Flange Face Type | Small Tongue, Lap-Joint Face, Raised Face, Ring Type Joint, Flat Face, Large Male-Female, Small Male-Female, Large Tongue & Groove Flanges manufacturer and Supplier |
Flanges Marking | All Flanges are marked as follows: Supplier or Manufacturer’s Name, Size, Class, Bore, Dimension, Material, Heat No. Or according to the customer’s request. |
Supplier and Distributors Located in | Ludhiana, Rajkot, Riyadh, Ahvaz, Ankara, Gurgaon, Khobar, Surat, Gimhae si, Montreal, Indore, Coimbatore, Port of Spain, Ranchi, Courbevoie, Perth, Calgary, Bengaluru, Gujarat, Ludhiana, Janeiro, Kolkata, Mexico, Baroda, Melbourne, Nagpur, Abu Dhabi, Chennai, Manama, Dammam, Kuwait, Kanpur, Istanbul, Sydney, Bangalore, New Delhi, Hyderabad, Karachi, Jamshedpur, Bogota, Ahmedabad, Ernakulam, Muscat, Thiruvananthapuram, Caracas, Noida, Santiago, Lagos, Mumbai, Pimpri Chinchwad, Tehran, London, Vadodara, India, Howrah, |
Test | Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Direct-reading Spectrograph, Magnetic particle detector |
Equipment | Bending machine, Sand-blasting machine, Pushing Machine,Press machine, electric bevelling machine etc |
En 1092-1 Type 11 C22.8 P250gh Welding Neck Flange
Cs P250gh Sorf Flange
P250gh Carbon Steel En 1092-1 Socket Weld Flanges
P250gh Weld Neck Flange 14" Pn16 Dn350
Carbon Steel P250gh High Hub Blind Flanges
P250gh Carbon Steel Square Flanges
Asme Sa P250gh Carbon Steel Spade Flange
Low Carbon Steel P250gh Reducing Flanges
P250gh Cs Spectacle Blind Flanges
P250gh Carbon Steel Raised Face Flanges
Asme Sa P250gh Carbon Steel Wnrf Flange
Grade P250gh Carbon Steel Ring Type Joint Flanges
American Society Of Mechanical Engineers (ASME) |
|
---|
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ASTM B16.5 | ASTM 150 | 89 | 60 | 4 | 13 | 16 |
ASTM 600 | 95 | 67 | 4 | 13 | 16 | |
ASTM 900 | 121 | 83 | 4 | 19 | 22 | |
ASTM 300 | 95 | 67 | 4 | 13 | 16 | |
ASTM 1500 | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 |
Carbon | Silicon | Manganese | Nickel | Phosphorus | Sulfur | Chromium | Vanadium | niobium | Titanium | Aluminum | - |
0.18 - 0.23 | max 0.4 | 0.3 - 0.9 | max 0.3 | max 0.025 | max 0.015 | max 0.3 | max 0.02 | max 0.01 | max 0.03 | 0.015 - 0.05 | Cr+Cu+Mo+Ni < 0.7 |
Nominal thickness (mm): | to 150 | ||
Rm - Tensile strength (MPa) (+N) | 410-540 | ||
Nominal thickness (mm): | to 50 | 50 - 100 | 100 - 150 |
ReH - Minimum yield strength (MPa) (+N) | 250 | 240 | 230 |
KV - Impact energy (J) longitud., | +20° 47 |
||
Nominal thickness (mm): | to 150 | ||
A - Min. elongation at fracture (%) (+N) | 25 |
Products | We supplied to following Locations |
---|---|
En 1092-1 Type 11 C22.8 P250gh Welding Neck Flange | UK, Mexico, Egypt, Spain |
Cs P250gh Sorf Flange | Australia, Philippines, Nigeria, UK |
P250gh Carbon Steel En 1092-1 Socket Weld Flanges | Hong Kong, Oman, Malaysia, UAE |
P250gh Weld Neck Flange 14" Pn16 Dn350 | Bahrain, Singapore, South Africa |
Carbon Steel P250gh High Hub Blind Flanges | Chile, Singapore, Italy, Iran |
P250gh Carbon Steel Square Flanges | Norway, Malaysia, Turkey, United Arab Emirates (UAE) |
Asme Sa P250gh Carbon Steel Spade Flange | Belgium, Philippines, Dammam -KSA, Indonesia. |
Low Carbon Steel P250gh Reducing Flanges | Malaysia, Philippines, Canada, Singapore |
P250gh Cs Spectacle Blind Flanges | Romania, Japan, Europe, Malaysia |
P250gh Carbon Steel Raised Face Flanges | Sweden, China, Colombia, Malaysia |
Asme Sa P250gh Carbon Steel Wnrf Flange | Kuwait, Brazil, South Africa, Saudi Arabia (KSA) |
Grade P250gh Carbon Steel Ring Type Joint Flanges | Russia, Dubai, Netherlands, Malaysia |
P250gh Carbon Steel Forged Flange | Poland, Canada, Ellington -United States, UK |
P250gh En 10222-2 Forged Flanges | Europe, UAE, United Kingdom -UK, Malaysia |
P250gh Carbon Steel En 1092-1 Long Weld Neck Flanges | Europe, France, Thailand, Qatar |
Carbon Steel P250gh Threaded Flanges | Malaysia, Germany, Czechia, Thailand |
Low Carbon Steel P250gh Blind Flanges | USA, Bangladesh, Finland, Malaysia |