• sales@vineshsteel.com
  • +91 - 022 - 66541072

Tongue And Groove Flange and Stainless Steel Large Tongue Groove Flange supplier in Mumbai

In the assembly of piping systems, it is very difficult to get a proper alignment of the flanges. Yet, some designs like the tongue and groove flanges are self aligning, which makes the assembly of a piping system much simpler. The Groove and Tongue Flanges manufacturer produces two parts in this assembly. The first part will have a ring that is machined on the surface of the flange.

Groove and Tongue Flange

The ring in this part is raised, which is why it is referred to as the tongue of the flange. The second part of the Tongue And Groove Flange consists of a depression machined on its surface. The depression otherwise referred to as a groove acts as a mating surface to the raised ring or the tongue. Both the depression and the raised ring are produced in such a manner that they can get aligned easily. An Ansi Tongue And Groove Flange are usually seen in applications that involved pump coverings or on valve bonnets. These applications are non-critical. Unlike other flanges, where there is an overlap between the mating surfaces, the Small Tongue Groove Flange does not require bolting. This component is most suited to work in low pressure environments. As with most flanges, the alloy used to make the Alloy steel Tongue Flange will determine its properties. For piping systems that require very little resistance to corrosion and good mechanical strength alloy steel is the perfect material. The use of heat treatment on flanges is common practice. Heat treatment on the Stainless Steel Large Tongue Groove Flange proves to be effective in increasing its yield and tensile strength, hardness, toughness as well as wear resistance properties. It is important that components demonstrate good resistance to wear, especially since they are in contact with other components. The wear resistance properties of stainless steel Large Tongue Flange tend to be much better than conventional alloy steels.

Searching for SS 304 Tongue & Groove Flange suppliers? Manufacturer and exporter of Carbon Steel Large Tongue Groove Flange in India, view A182 Gr F316 Tongue And Groove Flange Standard and Dimensions

 

Tongue And Groove Flange Specifications

Looking to buy Alloy steel Tongue Flange? Before placing an order check MOQ of Inconel 625 Large Tongue And Groove Flange suppliers and ask for a Free sample

Groove And Tongue Flanges Size Chart 1/2 Inch to 48 inch
Pressure Rating ANSI Class 150, 300, 600, 900, 1500, 2500 LBS
Pressure Calculation in DIN 6, 10, 16, 25, 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
JIS Standards 5, 10, 16, 20, 30, 40, 63 K
EN Standards 6, 10, 16, 25,r 40Bar
UNI Standards 6Bar 10Bar 16Bar 25Bar 40Bar
Coating Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types of Tongue & Groove Flange Forged / Threaded / Screwed / Plate
Test Hydrostatic testing machine, Direct-reading Spectrograph, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Pushing Machine, Press machine, Bending machine, electric bevelling machine, Sand-blasting machine etc
Flanges Face Type Lap-Joint Face, Ring Type Joint, Raised Face, Flat Face, Small Tongue, Large Male-Female, Small Male-Female, Large Tongue & Groove Flanges manufacturer and Supplier
Flanges Marking All Flanges are marked as follows: Supplier or Manufacturer’s Name, Size, Class, Bore, Dimension, Material, Heat No. Or according to the customer’s request.
Supplier and Distributors Located in Pimpri Chinchwad, Gujarat, Lagos, Istanbul, Hyderabad, Jamshedpur, Montreal, Courbevoie, Gimhae si, Caracas, Gurgaon, Kanpur, Bogota, London, Khobar, Tehran, Muscat, Vadodara, Manama, Thiruvananthapuram, Perth, Ahvaz, Ludhiana, Bangalore, Janeiro, New Delhi, Melbourne, Ranchi, Abu Dhabi, Nagpur, Rajkot, Ahmedabad, Mumbai, Chennai, Kolkata, Ernakulam, Port of Spain, Howrah, Karachi, Calgary, Riyadh, Santiago, Sydney, Ankara, Surat, Kuwait, Indore, India, Baroda, Ludhiana, Mexico, Bengaluru, Coimbatore, Dammam, Noida

Basic Types Of Groove & Tongue Flanges

Large Tongue & Groove Stainless Steel Flanges

Large Tongue & Groove Stainless Steel Flanges

Pn16 Tongue And Groove Face Dh150 Blind Forged Ss Flanges

Pn16 Tongue And Groove Face Dh150 Blind Forged Ss Flanges

Srf Face Tongue And Groove Flange

Srf Face Tongue And Groove Flange

Astm A536 Grade 65-45-12 Ductile Cast Iron Grooved Flanges

Astm A536 Grade 65-45-12 Ductile Cast Iron Grooved Flanges

6 Inch Pipe Flange Tongue And Groove Face

6 Inch Pipe Flange Tongue And Groove Face

3 Inch Weld Neck Tongue And Groove Flange

3 Inch Weld Neck Tongue And Groove Flange

Jis B2220 5k 10k 16k Slip On Casting Tongue And Groove Face Flanges

Jis B2220 5k 10k 16k Slip On Casting Tongue And Groove Face Flanges

Forged Steel Rtj Flange Tongue And Groove Flange

Forged Steel Rtj Flange Tongue And Groove Flange

Carbon Steel Tongue And Groove Flanges

Carbon Steel Tongue And Groove Flanges

Forged Tongue Groove Flange

Forged Tongue Groove Flange

Customize Pn16 Tongue And Groove Face Dh150 Blind Forged Ss Flanges

Customize Pn16 Tongue And Groove Face Dh150 Blind Forged Ss Flanges

150lb Flat Face Flange Tongue And Groove Flange

150lb Flat Face Flange Tongue And Groove Flange

Stainless Steel Wn Tongue And Groove So Flange

Stainless Steel Wn Tongue And Groove So Flange

Tongue And Groove Face Blind Forged Flanges

Tongue And Groove Face Blind Forged Flanges

Ansi Welded Stainless Steel Tongue And Groove Flange

Ansi Welded Stainless Steel Tongue And Groove Flange


Tongue And Groove Flange Design

Tongue And Groove Flange Design

Tongue Groove Flange Dimensions

Check Duplex Groove & Tongue Flange price list in India, Buy CS A694 Tongue & Groove Flange at factory price, View Stainless Steel Tongue And Groove Flanges Dimensions
DN d1 d2 d3 d4 d5 d6 d7 d8 f1 f2
¾" 1,69
(42,9)
1,75
(44,5)
1,69
(42,9)
1,75
(44,5)
1,31
(33,3)
1,25
(31,8)
2,12
(53,8)
2,06
(52,3)
0,25
(6,4)
0,19
(4,8)
1½" 2,88
(73,2)
2,94
(74,7)
2,50
(63,5)
2,56
(65,0)
2,12
(53,8)
2,06
(52,3)
3,31
(84,1)
2,88
(73,2)
0,25
(6,4)
0,19
(4,8)
1" 2,00
(50,8)
2,06
(52,3)
1,88
(47,7)
1,94
(49,3)
1,50
(38,1)
1,44
(36,6)
2,44
(62,0)
2,25
(57,2)
0,25
(6,4)
0,19
(4,8)
½" 1,38
(35,1)
1,44
(36,6)
1,38
(35,1)
1,44
(36,6)
1,00
(25,4)
0,94
(23,9)
1,81
(46,0)
1,75
(44,5)
0,25
(6,4)
0,19
(4,8)
1¼" 2,50
(63,5)
2,56
(65,0)
2,25
(57,2)
2,31
(58,7)
1,88
(47,8)
1,81
(46,0)
2,94
(74,7)
2,62
(66,6)
0,25
(6,4)
0,19
(4,8)
2" 3,62
(92,0)
3,69
(93,7)
3,25
(82,6)
3,31
(84,1)
2,88
(73,0)
2,81
(71,4)
4,06
(103,1)
3,62
(92,0)
0,25
(6,4)
0,19
(4,8)
4" 6,19
(157,2)
6,25
(158,8)
5,69
(144,5)
5,75
(146,1)
5,19
(131,8)
5,12
(130,0)
6,62
(168,1)
6,19
(157,2)
0,25
(6,4)
0,19
(4,8)
2½" 4,12
(104,6)
4,19
(106,4)
3,75
(95,2)
3,81
(96,8)
3,38
(85,8)
3,31
(84,1)
4,56
(115,8)
4,12
(104,6)
0,25
(6,4)
0,19
(4,8)
3" 5,00
(127,0)
5,06
(128,5)
4,62
(117,5)
4,69
(119,1)
4,25
(108,0)
4,19
(106,4)
5,44
(138,2)
5,00
(127,0)
0,25
(6,4)
0,19
(4,8)
5" 7,31
(185,7)
7,38
(187,5)
6,81
(173,0)
6,88
(174,8)
6,31
(160,3)
6,25
(158,8)
7,75
(196,9)
7,31
(185,7)
0,25
(6,4)
0,19
(4,8)
6" 8,50
(215,9)
8,56
(217,5)
8,00
(203,2)
8,06
(204,7)
7,50
(190,5)
7,44
(189,0)
8,94
(227,0)
8,50
(215,9)
0,25
(6,4)
0,19
(4,8)
8" 10,62
(269,8)
10,69
(271,5)
10,00
(254,0)
10,06
(255,5)
9,38
(238,3)
9,31
(236,5)
11,06
(281,0)
10,62
(269,8)
0,25
(6,4)
0,19
(4,8)
12" 15,00
(381,0)
15,06
(382,5)
14,25
(362,0)
14,31
(363,5)
13,50
(342,9)
13,44
(341,4)
15,44
(392,2)
15,00
(381,0)
0,25
(6,4)
0,19
(4,8)
14" 16,25
(412,8)
16,31
(414,3)
15,50
(393,7)
15,56
(395,2)
14,75
(374,7)
14,69
(373,1)
16,69
(423,9)
16,25
(412,8)
0,25
(6,4)
0,19
(4,8)
10" 12,75
(323,5)
12,81
(325,4)
12,00
(304,8)
12,06
(306,3)
11,25
(285,8)
11,19
(284,2)
13,19
(335,0)
12,75
(323,5)
0,25
(6,4)
0,19
(4,8)
16" 18,50
(469,9)
18,56
(471,5)
17,62
(447,6)
17,69
(449,3)
16,75
(425,5)
16,69
(423,9)
18,94
(481,0)
18,50
(469,9)
0,25
(6,4)
0,19
(4,8)
20" 23,00
(584,2)
23,06
(585,8)
22,00
(558,8)
22,06
(560,3)
21,00
(533,4)
20,94
(531,9)
23,44
(595,4)
23,00
(584,2)
0,25
(6,4)
0,19
(4,8)
24" 27,25
(692,2)
27,31
(693,7)
26,25
(666,8)
26,31
(668,3)
25,25
(641,4)
25,19
(639,8)
27,69
(703,3)
27,25
(692,2)
0,25
(6,4)
0,19
(4,8)
18" 21,00
(533,4)
21,06
(535,0)
20,12
(511,0)
20,19
(512,8)
19,25
(489,0)
19,19
(487,4)
21,44
(544,6)
21,00
(533,4)
0,25
(6,4)
0,19
(4,8)

Large Tongue And Groove Flange Dimensions

Nominal Large Tongue Large Tongue Gasket Number Size of Bolt Torque Comp Force Maximum Gasket Internal Min. Rec’d Min. Rec’d Max. Rec’d/Avail. Preferred
Pipe Size Contact I.D. Contact O.D. Contact Area Of Bolts at 60ksi Stress Per Bolt @ 60ksi Stress Avail. Pressure Gasket Stress Torque/Bolt Gasket Stress Torque/Bolt
(in) (in) (in) (sq.in.) Bolts (in) (ft.lbs.) (psi) (psi) (psig) (psi) (ft.lbs.) (psi) (ft.lbs.)
0.75 1.31 1.69 0.89 4 0.50 60 7560 33791 <300 4800 9 10000 18
1 1.50 2.00 1.37 4 0.50 60 7560 22013 <300 4800 13 10000 27
0.5 1.00 1.38 0.71 4 0.50 60 7560 42594 <300 4800 7 10000 14
1.25 1.88 2.50 2.13 4 0.50 60 7560 14186 <300 4800 20 10000 42
3.5 4.75 5.50 6.03 8 0.63 120 12120 16067 <300 4800 36 10000 75
2 2.88 3.62 3.78 4 0.63 120 12120 12839 <300 4800 45 10000 93
2.5 3.38 4.12 4.36 4 0.63 120 12120 11128 <300 4800 52 10000 108
1.5 2.12 2.88 2.98 4 0.50 60 7560 10137 <300 4800 28 10000 59
3 4.25 5.00 5.45 4 0.63 120 12120 8902 <300 4800 65 8902 120
8 9.38 10.62 19.47 8 0.75 200 18120 7446 <300 4800 129 7446 200
4 5.19 6.19 8.93 8 0.63 120 12120 10854 <300 4800 53 10854 120
5 6.31 7.31 10.69 8 0.75 200 18120 13558 <300 4800 71 13558 200
6 7.50 8.50 12.56 8 0.75 200 18120 11541 <300 4800 83 11541 200
24 25.25 27.25 82.43 20 1.25 1000 55740 13525 <300 4800 355 13525 1000
10 11.25 12.75 28.26 12 0.88 320 25140 10675 <300 4800 144 10675 320
14 14.75 16.25 36.50 12 1.00 490 33060 10868 <300 4800 216 10868 490
16 16.75 18.50 48.42 16 1.00 490 33060 10923 <300 4800 215 10923 490
18 19.25 21.00 55.29 16 1.13 710 43680 12639 <300 4800 270 12639 710
12 13.50 15.00 33.56 12 0.88 320 25140 8990 <300 4800 171 8990 320
20 21.00 23.00 69.08 20 1.13 710 43680 12646 <300 4800 269 12646 710

Ansi Tongue And Groove Flange Dimensions

Nominal Large Tongue Large Tongue Gasket Number Size of Bolt Torque Comp Force Max. Gasket Internal Min. Rec’d Min. Rec’d Max. Rec’d/Avail. Preferred
Pipe Size Contact I.D. Contact O.D. Contact Area Of Bolts at 60ksi Stress Per Bolt @ 60ksi Stress Avail. Pressure Gasket Stress Torque/Bolt Gasket Stress Torque/Bolt
(in) (in) (in) (sq.in.) Bolts (in) (ft.lbs.) (psi) (psi) (psig) (psi) (ft.lbs.) (psi) (ft.lbs.)
2 2.88 3.62 3.78 8 0.63 120 12120 25679 <800 6400 46 10000 47
0.75 1.31 1.69 0.89 4 0.63 120 12120 54174 <800 6200 21 10000 22
1 1.50 2.00 1.37 4 0.63 120 12120 35290 <800 6400 28 10000 34
0.5 1.00 1.38 0.71 4 0.50 60 7560 42594 <800 6200 12 10000 14
1.25 1.88 2.50 2.13 4 0.63 120 12120 22742 <800 6400 43 10000 53
1.5 2.12 2.88 2.98 4 0.75 200 18120 24298 <800 6400 64 10000 82
2.5 3.38 4.12 4.36 8 0.75 200 18120 33273 <800 6400 60 10000 60
3 4.25 5.00 5.45 8 0.75 200 18120 26618 <800 6400 88 10000 75
3.5 4.75 5.50 6.03 8 0.75 200 18120 24021 <800 6400 99 10000 83
4 5.19 6.19 8.93 8 0.75 200 18120 16227 <800 6400 125 10000 123
6 7.50 8.50 12.56 12 0.75 200 18120 17312 <800 6400 131 10000 116
8 9.38 10.62 19.47 12 0.88 320 25140 15496 <800 6400 205 10000 207
10 11.25 12.75 28.26 16 1.00 490 33060 18718 <800 6400 219 10000 262
12 13.50 15.00 33.56 16 1.13 710 43680 20826 <800 6400 319 15000 511
5 6.31 7.31 10.69 8 0.75 200 18120 13558 <800 6400 156 10000 148
14 14.75 16.25 36.50 20 1.13 710 43680 23933 <800 6600 287 15000 445
16 16.75 18.50 48.42 20 1.25 1000 55740 23021 <800 6600 401 15000 652
20 21.00 23.00 69.08 24 1.25 1000 55740 19365 <800 6400 484 15000 775
24 25.25 27.25 82.43 24 1.50 1600 84300 24546 <800 6400 662 15000 978
18 19.25 21.00 55.29 24 1.25 1000 55740 24194 <800 6400 439 15000 620

Groove & Tongue Flange Schedule Chart

A PED approved Groove & Tongue Flange manufacturers in India, Check Titanium Tongue Groove Flange Dimensions, Titanium Tongue And Groove Flange Gasket Dimensions and price list
Nominal Pipe Size
Inches
DN
MM
Flange Outer Diameter
A MM
Flange Thickness D
MM
Slip On Flange Weight in KG Weld Neck Flange Weight in KG Blind Flange Weight in KG
1/ 2 15 88.9 11.2 0.4 0.5 0.4
1 25 108 14.2 0.8 1 0.9
1 1/ 4 32 117.3 15.7 1 1.3 1.2
1 1/ 2 40 127 17.5 1.3 1.7 1.5
3/ 4 20 98.6 12.7 0.6 0.7 0.6
2 50 152.4 19.1 2.1 2.6 2.4
2 1/ 2 65 177.8 22.4 3.3 4.1 3.9
24 600 812.8 47.8 86.9 115 185.0
3 1/ 2 90 215.9 23.9 4.8 6.1 6.2
4 100 228.6 23.9 5.3 6.8 7.0
5 125 254 23.9 6.1 8.6 8.6
3 80 190.5 23.9 3.9 4.9 4.9
6 150 279.4 25.4 7.5 10.6 11.3
8 200 342.9 28.4 12.1 17.6 19.6
12 300 482.6 31.8 26.2 36.5 43.2
14 350 533.4 35.1 34.6 48.4 58.1
16 400 596.9 36.6 44.8 60.6 76.1
10 250 406.4 30.2 16.5 24 28.6
18 450 635 39.6 48.9 68.3 93.7
20 500 698.5 42.9 61.9 84.5 122.0

Large Tongue Flange Pressure rating

Temperature (F°) 150 LB 300 LB 400 LB 600 LB 900 LB 1500 LB 2500 LB
-20 to 100 285 740 985 1480 2220 3705 6170
600 140 570 755 1135 1705 2840 4730
800 80 410 550 825 1235 2055 3430
300 230 655 870 1310 1965 3270 5450
400 200 635 845 1265 1900 3170 5280
500 170 605 805 1205 1810 3015 5025
650 125 550 730 1100 1650 2745 4575
1000 20 85 115 170 255 430 715
200 260 680 905 1360 2035 3395 5655
700 110 530 710 1060 1590 2655 4425
750 95 505 675 1015 1520 2535 4230
850 65 320 425 640 955 1595 2655
900 50 230 305 460 690 1150 1915
950 35 135 185 275 410 685 1145

Know what exactly we supply and where it goes

Products We supplied to following Locations
Large Tongue & Groove Stainless Steel Flanges Qatar, Europe, France, Thailand
Pn16 Tongue And Groove Face Dh150 Blind Forged Ss Flanges Dammam -KSA, Philippines, Indonesia, Belgium
Srf Face Tongue And Groove Flanges Czechia, Thailand, Germany, Malaysia
Astm A536 Grade 65-45-12 Ductile Cast Iron Grooved Flanges Malaysia, Bangladesh, USA, Finland
6 Inch Pipe Flanges Tongue And Groove Face South Africa, Kuwait, Saudi Arabia (KSA), Brazil
3 Inch Weld Neck Tongue And Groove Flanges Bahrain, Singapore, South Africa, Singapore
Jis B2220 5k 10k 16k Slip On Casting Tongue And Groove Face Flanges Philippines, UK, Australia, Nigeria
Forged Steel Rtj Flange Tongue And Groove Flanges Oman, Hong Kong, Malaysia, UAE
Carbon Steel Tongue And Groove Flange Chile, Iran, Italy, Singapore
Forged Tongue Groove Flange United Arab Emirates (UAE), Norway, Turkey, Malaysia
Customize Pn16 Tongue And Groove Face Dh150 Blind Forged Ss Flange Netherlands, Russia, Malaysia, Dubai
150lb Flat Face Flange Tongue And Groove Flanges Egypt, Mexico, Spain, UK
Stainless Steel Wn Tongue And Groove So Flanges United Kingdom -UK, Malaysia, Europe, UAE
Tongue And Groove Face Blind Forged Flanges UK, Poland, Canada, Ellington -United States
Ansi Welded Stainless Steel Tongue And Groove Flanges Philippines, Canada, Malaysia, Singapore
Asme B16.48 Calss150 Welding Neck Tongue And Groove Flanges Europe, Romania, Japan, Malaysia
Sa105, 20 Inch, Tongue And Groove Blind Flanges Sweden, Malaysia, Colombia, China
Astm A182 F316l, 12 Inch, Tongue And Groove Flanges Joint Malaysia, Los Alamos -Mexico, Taiwan, Philippines
Astm A105n, 10 Inch, Tongue-and-groove (T&g) Flange Singapore, NY 12203 (USA), South Korea, Malaysia