F468 UNS N06625 Hex Nuts and ASTM F468 Alloy 400 Threaded Rod Manufacturer In India
There are several benefits of using non-ferrous alloys as fasteners. First, most nonferrous alloys including Inconel, monel, Hastelloy, copper, aluminum, and titanium grades tend to have corrosion resistance properties that are naturally inherent. In comparison to ferrous alloys, the density of an ASTM F468 Anchor Bolt tends to be much lighter, which is why they are ideal for applications where weight savings are a primary concern. Malleability and ductility are the other important characteristics exhibited by this group of alloys.
With better ductility, it becomes much easier to shape and form the ASTM F468 Material as required. Threading them also is much simpler, since the material is soft, making it easier to miter or cut the alloy. Specification ASTM F468 exclusively deals with non-ferrous components, which may be used for general purpose applications. As there are several different grades of alloy grouped here, the material’s chemical composition of the ASTM F468 Bolts must be according to the specification. The processing of these fasteners could be done by any of the three means - machining, hot forming, or cold forming, depending on the properties required by the fastener. For instance, if high precision is required, then the fastener would be processed by hot forming. Apart from a higher degree of accuracy, the surface profile of the ASTM F468 Flange Bolt will be much better. On the other hand, cold forming the material will yield differing geometrics while imparting the ASTM F468 Alloy 400 Nuts a better finish surface. The rate of production is also faster, and the end product has a higher structural strength. Machining an alloy improves its efficiency and accuracy, making it possible to achieve threads on fasteners like screws.
View ASTM F468 Bolts, Heat-treated F468 Threaded Rod Price List, Buy ASTM F468 UNS N06625 Stud Bolts at low price
Table of Content
- ASTM F468 Bolts Material Specification Chart
- Chemical Structure Of ASTM F468 Alloy 400 Hex Bolt
- Mechanical Characteristics Of SF468 Alloy 400 Stud Bolts
- ASTM F468 Bolts Equivalent Material Grade
- SF468 Alloy 400 Bolts Type
- ASTM F468 Nuts Types
- Astm F468 Stud Bolt Type
- Types of ASME SF468 Screws
- ASTM F468 Washers Types
- ASME SF468 Fasteners Sizes Available
- Why SF468 Fasteners Are Used In Power Generation?
- ASTM F468 Hex Bolt Price In India
- Why choose Vinesh Steel to buy Asme SF468 Fasteners?
- Quality and Test reports Of Astm F468 Bolts and Nuts
- ASTM F468 Stud Bolt Torque Chart
- Asme SF468 bolt and nut grade markings
- Astm F468 Alloy 400 Studs Bolt Sizes
- ASTM F468 Threaded Rod threads type
- Astm F468 Nut Weight Chart
- din standard for SF468 hex head bolts
- SF468 Alloy 400 Hex Bolts dimensions
- different SF468 bolt head styles
- ASME SF468 Nut Bolt Packing
- Asme SF468 screw head drive types
- surface finish of ASME SF468 bolts
- ASTM F468 Alloy 400 plain washer weight chart
- ASTM F468 hex nut thread types
ASTM F468 Bolts Specification Chart
| Dimensions | ASME B18.2.1, B18.3 |
|---|---|
| Standard | ASTM F468 / ASME SF468 |
| Melt Origin | Korea, Japan, South America, East Europe |
| Mandatory Requirements | Free from Radioactive Contaminationand Mercury |
| Certification | Dual Certified As per ASTM and ASME Standards |
| Additional Requirements | NACE MR0103 / ISO 15156 Compliance / MR0175 |
| Threads Configuration | B1.1 2A or 3A Inch Unified Threads B1.13M 6h Metric Coarse Threads |
Chemical Structure Of ASTM F468 Alloy 400 Flange Nut
Check ASTM F468 Alloy 400 Threaded Rod, F468 UNS N06625 Hex Head Bolt Price list online, Buy F468 Stud Bolts at affordable price
| Grade | C | Mn | Si | Fe | S | Cr2 | Al-Ti | Ni | |
| ASTM F468 | Minimum | – | – | – | – | – | 20.0 | – | 58.0 |
| Maximum | 0.10 | 0.50 | 0.50 | 5.0 | 0.015 | 23.0 | 0.40 | – | |
Mechanical Characteristics Of SF468 Alloy 400 Nuts
| Properties | Metric | Imperial |
| Yield Stress | 172 To 345 MPa | 25 To 50 ksi |
| Tensile strength | 517 To 620 MPa | 75 To 90 ksi |
| Poisson’s ratio | 0.32 | 0.32 |
| Modulus of elasticity | 179 GPa | 26000 ksi |
ASTM F468 Weld Nut Equivalent Material Grade
| STANDARD | WERKSTOFF Number | BS | AFNOR | JIS | UNS | GOST | EN |
| ASTM F468 | 2.4360 | NA 13 | NU-30M | NW 4400 | N04400 | МНЖМц 28-2,5-1,5 | NiCu30Fe |
SF468 Alloy 400 Bolts Type
ASTM F468 Bolts
ASTM F468 Hex Bolts
ASTM F468 Alloy 400 Heavy Hex Bolts
SF468 Alloy 400 Flange Bolts
ASTM F468 Carriage Bolt
SF468 Alloy 400 Bolt
ASTM F468 Nuts Types
ASTM F468 Hex Nuts
Astm F468 Nyloc Nuts
ASME SF468 Nut
ASTM F468 Self Locking Nuts
ASME SF468 Flange Nuts
SF468 Nut
Astm F468 Stud Bolt Type
ASTM F468 Threaded Rod
Asme SF468 Studs
ASTM F468 Double Ended Studs
Astm F468 Fully Threaded Studs
ASTM F468 Unc Stud Bolt
Asme SF468 Stud Bolts
Types of ASME SF468 Screws
Astm F468 Alloy 400 Socket Head Cap Screws
ASTM F468 Self Tapping Screws
Astm F468 Set Screw
SF468 Cap Screw
SF468 Alloy 400 Coach Screws
SF468 Screws
ASTM F468 Washers Types
ASME SF468 Flat Washer
Asme SF468 Fender Washer
ASME SF468 Belleville Washer
Astm F468 Washer
ASTM F468 Alloy 400 Spring Washer
ASTM F468 Lock Washer
ASME SF468 Fasteners Sizes Available
Why SF468 Fasteners Are Used In Power Generation?
ASTM F468 Bolts manages non-ferrous, economically created latches like studs, bolts with their widths running between ¼" to around 1 ½". These clasp incorporate different amalgam grades like the titanium grade 5, Monel like 400, 405 and K500 , Inconel 625, aluminum compounds, copper composites and so on
ASTM F468 Hex Bolt Price In India
Manufacturer and Supplier of ASTM F468 UNS N06625 Screws in India, View ASTM F468 Bolts Size Chart, ASTM F468 Alloy 400 Hex Nut Dimension
| Description | Price Per Piece in INR | Price Per Piece in USA $ | Price Per Piece in UAE Dirham |
|---|---|---|---|
| ASTM F468 Alloy UNS N06625 Bolt Stud Bolt | INR 14.92 | USA $ 0.20 | AED 0.73 |
| ASTM F468 Stainless Steel Stud Bolt Stud Rod Nut | INR 7.46 | USA $ 0.10 | AED 0.37 |
| ASTM F468 Alloy Steel C/W Hex Nuts | INR 0.75 | USA $ 0.01 | AED 0.037 |
| ASTM F468 Stainless Steel Stud Bolt | INR 22.38 | USA $ 0.30 | AED 1.10 |
| ASTM F468 UNS N05500 Bolts Monel alloy fastener | INR 37.30 | USA $ 0.50 | AED 1.84 |
Why choose Vinesh Steel to buy Asme SF468 Fasteners?
We are well known ASTM F468 Bolts Manufacturers in India, We provide following services to our customers
- Free Samples
- Third Party Inspection
- Mill Test Certificate is supplied with shipment
- Resonable Prices
- Timely delivery
Quality and Test reports Of Astm F468 Bolts and Nuts
- Third Party Inspection
- EN 10204/3.1B
- Raw Materials Certificate
- 100% Radiography Test
- Mill test
ASTM F468 Stud Bolt Torque Chart
| Diameter | Torque Feet/Lbs | ||
| 30% | 70% | 100% | |
| 9/16 | 23 | 53 | 75 |
| 1/2 | 16 | 36 | 52 |
| 7/8 | 71 | 166 | 237 |
| 3/4 | 55 | 129 | 184 |
| 1 | 107 | 249 | 356 |
| 5/8 | 31 | 73 | 104 |
| 1.1/4 | 179 | 417 | 596 |
| 1.1/8 | 127 | 297 | 424 |
| 1.3/8 | 186 | 435 | 622 |
| 1.9/16 | 168 | 392 | 560 |
| 1.1/2 | 246 | 574 | 821 |
| 1.5/8 | 191 | 445 | 636 |
| 1.7/8 | 298 | 696 | 994 |
| 1.3/4 | 240 | 561 | 801 |
| 2 | 366 | 853 | 1219 |
| 3 | 1289 | 3008 | 4297 |
| 2.1/2 | 733 | 1709 | 2442 |
| 2.1/4 | 529 | 1234 | 1762 |
| 2.3/4 | 986 | 2300 | 3285 |
Asme SF468 bolt and nut grade markings
- Brinell Hardness Number
- Supplier and Manufacturer’s Name
- Grade
- ASTM Specification
- Heat Code
- Nominal Diameter
Astm F468 Alloy 400 Studs Bolt Sizes
| Diameter | Diameter in mm | Diameter in inch | Nut Sizes |
|---|---|---|---|
| M12 | 12 | 0.4724 | 19 |
| M14 | 14 | 0.5512 | 22 |
| M18 | 18 | 0.7087 | 27 |
| M10 | 10 | 0.3937 | 17 |
| M16 | 16 | 0.6299 | 24 |
| M20 | 20 | 0.7874 | 30 |
| M24 | 24 | 0.9449 | 36 |
| M22 | 22 | 0.8661 | 32 |
| M27 | 27 | 1.063 | 41 |
| M33 | 33 | 1.2992 | 50 |
| M30 | 30 | 1.1811 | 46 |
| M36 | 36 | 1.4173 | 55 |
| M42 | 42 | 1.6535 | 65 |
| M39 | 39 | 1.5354 | 60 |
| M45 | 45 | 1.7717 | 70 |
| M52 | 52 | 2.0472 | 80 |
| M48 | 48 | 1.8898 | 75 |
| M56 | 56 | 2.2047 | 85 |
| M64 | 64 | 2.5197 | 95 |
| M60 | 60 | 2.3622 | 90 |
| M68 | 68 | 2.6772 | 100 |
| M76 | 76 | 2.9921 | 110 |
| M72 | 72 | 2.8346 | 105 |
| M80 | 80 | 3.1496 | 115 |
| M90 | 90 | 3.5433 | 130 |
| M85 | 85 | 3.3464 | 120 |
| M100 | 100 | 3.937 | 145 |
| M160 | 160 | 6.2992 | 230 |
| M125 | 125 | 4.9212 | 180 |
| M110 | 110 | 4.3307 | 155 |
| M140 | 140 | 5.5118 | 200 |
ASTM F468 Threaded Rod threads type
- Right Hand
- Left Hand
Astm F468 Nut Weight Chart
| Sizes | Weight per Metre | Size (UNC) | Weight per Meter |
|---|---|---|---|
| M2 | 0.0187 | ||
| M2.5 | 0.030 | ||
| M3.5 | 0.060 | ||
| M4 | 0.078 | ||
| M3 | 0.044 | ||
| M5 | 0.124 | ||
| M6 | 0.177 | ¼ | 0.194 |
| M8 | 0.319 | 5/16 | 0.323 |
| 7/16 | 0.650 | ||
| M12 | 0.725 | ½ | 0.896 |
| M10 | 0.500 | 3/8 | 0.469 |
| M14 | 0.970 | 9/16 | 1.096 |
| M16 | 1.330 | 5/8 | 1.342 |
| M18 | 1.650 | ||
| M20 | 2.080 | ¾ | 2.021 |
| M22 | 2.540 | 7/8 | 2.756 |
| M24 | 3.000 | 1 | 3.638 |
| M27 | 3.850 | 1 1/8 | 4.545 |
| M30 | 4.750 | 1 ¼ | 5.718 |
| M33 | 5.900 | 1 3/8 | 6.842 |
| M36 | 6.900 | 1 ½ | 8.281 |
| M39 | 8.200 | 1 5/8 | 9.726 |
| M42 | 9.400 | 1 ¾ | 11.231 |
| M45 | 11.000 | 1 7/8 | 13.038 |
| M48 | 12.400 | 2 | 14.741 |
Din Standard For SF468 Hex Head Bolts
- DIN 931
- DIN 610
- DIN 960
- DIN 961
- DIN 7990
- DIN 933
SF468 Alloy 400 Hex Bolts dimensions
| Nominal Size | F | G | H | ||||||
| Width Across Flats | Width Across Corners | Thickness | |||||||
| Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | |||
| 1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
| 5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
| 7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
| 9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
| 1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
| 5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
| 7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
| 3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
| 3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
| 1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
| 1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
| 1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
| 1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
| 1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
| 1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
| 2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
| 2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
| 2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
| 2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
different SF468 bolt head styles
ASME SF468 Nut Bolt Packing
Sample Packing
Bubble Wrap Packing
Box Packing
Asme SF468 screw head drive types
surface finish of ASME SF468 bolts
- Manganese Phosphate
- Cadmium
- Bright Zinc Plated
- Plated zinc-nickel
- Sherardized
- Zinc Alluminium Flake Coating
- Self-Colour
- Zinc Electro Plating
- Ptfe Coated Silicon Bronze Bolts
- Dacroment
- Teflon
- Zinc Phosphat
- Anodizing
- Nickel plated
- Xylon
- Phosphate
- Geometry
ASTM F468 Alloy 400 plain washer weight chart
Looking to buy F468 Pan Head Wood Screws? Before placing an order check MOQ of ASTM F468 Stud Bolts and ASTM F468 Alloy 400 Hex Head Bolt suppliers and ask for a Free sample
| Sizes | USS | SAE | ||||
| Outer Diameter | Inner Diameter | Thickness | Outer Diameter | Inner Diameter | Thickness | |
| 1/8 (#6) | 0.375 | 0.156 | .036/.065 | |||
| 5/32 (#8) | 0.438 | 0.188 | .036/.065 | |||
| 7/32 (#12) | 0.562 | 0.250 | .051/.080 | |||
| 3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
| 1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
| 5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
| 3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
| 7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
| 1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
| 7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
| 1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
| 1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
| 1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | |||
| 1 3/4 | 4.000 | 1.875 | .153/.213 | |||
| 1 7/8 | 4.250 | 2.000 | .153/.213 | |||
| 2 | 4.500 | 2.125 | .153/.213 | |||
| 2 1/4 | 4.750 | 2.375 | .320/.248 | |||
| 2 1/2 | 5.000 | 2.625 | .210/.280 | |||
| 2 3/4 | 5.250 | 2.875 | .228/.410S | |||
| 3 | 5.500 | 3.125 | .249/.327 | |||
ASTM F468 Hex Nut Thread Types
