It is not unusual for a system to get unfastened due to vibrations of a high velocity. Such instances call for support from fastening devices like washers to prevent the unraveling of the assembly. Washers balance out the shocks and vibrations by having a dampening or an absorbing effect. And therefore, using an ASTM F436 Washer gives the application stability at some level. In addition to stabilizing equipment, they prevent the head of the bolt from biting into the surface of the material it is to be latched upon.
The marks left on the material in these cases aren’t aesthetically pleasing. So when a washer is placed under the head of the bolt, the surface remains untarnished, since it is the ASTM F436 Flat Washers that take on the stress of the entire bolt across its surface area. There are two types of alloys that fall under this specification. Type 1 refers to carbon steel washers, whereas, type 3 refers to weathering steel, both of which may be produced by either one of the following processes - basic-oxygen, open-hearth, or electric-furnace process. The F436 Extra Thick Washers produced under this specification are subjected to a chemical analysis while also determining values such as Rockwell hardness, thickness, inside (ID), and outside diameter (OD). The device also needs to conform to the value of the clipped width. Thicker than a flat washer, ASTM F436 Bevel Washers prove to be useful as a replacement in damaged or worn-out faucet seats. Unlike flat washers that have a uniform surface, the device is split. The split created on the ASTM F436 Lock Washers is what generates some tension, which is what holds the bolt in its place. These type of washers evenly distribute pressure, especially in softer materials which can easily pull through. It is not uncommon to use F436 Lock Washers with flat washers for a more stable hold.
ASTM | F436 |
---|---|
ASTM F436M Washers Coatings | Cadmium, Teflon, Black Oxide, Galvanized, Xylan, Zinc |
Astm F436 Washers Dimensions | ASME B18.3, B18.2.1 |
Mandatory Requirements | Free from Mercury Contamination, Radioactive |
Additional Requirements | NACE MR0103 /MR0175 / ISO15156 |
Export To | Tehran, Ludhiana, Indore, Ranchi, Gurgaon, Melbourne, Khobar, Muscat, Montreal, Bogota, Thiruvananthapuram, Gimhae si, Calgary, Port of Spain, Ernakulam, Janeiro, Dammam, Ahvaz, Pimpri Chinchwad, Ankara, Baroda, Sydney, Abu Dhabi, Noida, Ludhiana, Ahmedabad, India, Mumbai, Jamshedpur, Bengaluru, Hyderabad, Karachi, Chennai, Tau, Courbevoie, Riyadh, Kuwait, Rajkot, Mexico, Kanpur, Manama, Gujarat, Lagos, Vadodara, Perth, Coimbatore, Istanbul, London, Nagpur, Howrah, Caracas, Surat, Santiago, New Delhi, Bangalore, Kolkata |
Astm F436 Washer
Astm F436 Flat Washer
Astm F436 Type 3 Lock Washer
Astm F436M Plate Washer
Astm F436 Spring Washer
Astm F436M Stainless Steel Washer
Astm F436 Square Washers
Astm F436 Type 1 Taper Washer
F436 Bevel Washer
Size | USS | SAE | ||||
---|---|---|---|---|---|---|
Inside Diameter in Inch | Outside Diameter in Inch | Thickness in Inch | Inside Diameter in Inch | Outside Diameter in Inch | Thickness in Inch | |
#2 | - | - | - | 3/32 | 1/4 | 0.020 |
#4 | - | - | - | 1/8 | 5/16 | 0.032 |
#6 | - | - | - | 5/32 | 3/8 | 0.049 |
#8 | - | - | - | 3/16 | 7/16 | 0.049 |
#10 | - | - | - | 7/32 | 1/2 | 0.049 |
#12 | - | - | - | 1/4 | 9/16 | 0.065 |
1/4 | 5/16 | 0.734 | 0.065 | 9/32 | 5/8 | 0.065 |
5/16 | 3/8 | 7/8 | 0.083 | 11/32 | 11/16 | 0.065 |
3/8 | 7/16 | 1 | 0.083 | 13/32 | 13/16 | 0.065 |
7/16 | 1/2 | 1-1/4 | 0.083 | 15/32 | 15/16 | 0.065 |
1/2 | 9/16 | 1-3/8 | 0.109 | 17/32 | 1-1/16 | 0.095 |
9/16 | 5/8 | 1-15/32 | 0.109 | 19/32 | 1-5/32 | 0.095 |
5/8 | 11/16 | 1-3/4 | 0.134 | 21/32 | 1-5/16 | 0.095 |
3/4 | 13/16 | 2 | 0.148 | 13/16 | 1-15/32 | 0.134 |
7/8 | 15/16 | 2-1/4 | 0.165 | 15/16 | 1-3/4 | 0.134 |
1 | 1-1/16 | 2-1/2 | 0.165 | 1-1/16 | 2 | 0.134 |
1-1/8 | 1-1/4 | 2-3/4 | 0.165 | - | - | - |
1-1/4 | 1-3/8 | 3 | 0.165 | - | - | - |
1-3/8 | 1-1/2 | 3-1/4 | 0.180 | - | - | - |
1-1/2 | 1-5/8 | 3-1/2 | 0.180 | - | - | - |
1-5/8 | 1-3/4 | 3-3/4 | 0.180 | - | - | - |
1-3/4 | 1-7/8 | 4 | 0.180 | - | - | - |
2 | 2-1/8 | 4-1/2 | 0.213 | - | - | - |
Element | Type 1 | Type 3 |
---|---|---|
Sulfur | 0.050 | 0.050 |
Phosphorous | 0.040 | 0.040 |
Chromium | – | 0.45 To 0.65 |
Silicon | – | 0.15 To 0.35 |
Copper | – | 0.25 To 0.45 |
Nickel | – | 0.25 To 0.45 |
F436 Plain Washer | F436 Galvanized Washer |
---|---|
38 to 45 | 26 to 45 |
F436 Plain Washer | F436 Galvanized Washer |
---|---|
38 to 45 | 26 to 45 |
ASTM F436 Hardened Washers are utilized to offer snugness to the joint, to forestall spillage and to convey pressure under the head of nut or fastener. These are intended for universally useful like with screws, nuts, studs and other strung latches.
Description | Price Per Piece in INR | Price Per Piece in USA $ | Price Per Piece in UAE Dirham |
---|---|---|---|
3/4'' stainless steel astm f436 flat washer | INR 14.92 | USA $ 0.20 | AED 0.73 |
carbon steel zinc plated F436 spring washer | INR 0.75 | USA $ 0.01 | AED 0.037 |
USS/SAE F436 Zinc Plated Extra Thick Flat Washer | INR 1.49 | USA $ 0.02 | AED 0.073 |
High Tensile Hardness ASTM F436 Flat Washers | INR 11.19 | USA $ 0.15 | AED 0.55 |
hot dipped galvanized stainless steel astm f436 flat washer | INR 0.037 | USA $ 0.01 | AED 0.037 |
We are well known Astm F436 Spring Washer Manufacturers in India, We provide following services to our customers
Bolt Size | Outer Diameter | Inner Diameter | Thickness | Weight Lbs |
---|---|---|---|---|
1/2 | 1.063 | .531 | .097/.177 | 20.0 |
5/8 | 1.313 | .688 | .122/.177 | 35.0 |
3/4 | 1.469 | .813 | .122/.177 | 41.2 |
7/8 | 1.750 | .938 | .136/.177 | 71.0 |
1 | 2.000 | 1.063 | .136/.177 | 93.8 |
1-1/8 | 2.250 | 1.188 | .136/.177 | 120 |
1-1/4 | 2.500 | 1.375 | .136/.177 | 144 |
1-3/8 | 2.750 | 1.531 | .136/.177 | 174 |
1-1/2 | 3.000 | 1.625 | .136/.177 | 208 |
1-5/8 | 3.250 | 1.770 | .178/.280 | 311 |
1-3/4 | 3.375 | 1.875 | .178/.280 | 328 |
1-7/8 | 3.500 | 2.000 | .178/.280 | 345 |
2 | 3.750 | 2.125 | .178/.280 | 398 |
2-1/4 | 4.000 | 2.407 | .240/.340 | 568 |
2-1/2 | 4.500 | 2.657 | .240/.340 | 734 |
2-3/4 | 5.000 | 2.907 | .240/.340 | 921 |
3 | 5.500 | 3.157 | .240/.340 | 1129 |
Bolt Size | Outer diameter | Inner diameter | Thickness | Weight |
---|---|---|---|---|
1/2 | 1.063 | .531 | .097/.177 | 20.0 |
5/8 | 1.313 | .688 | .122/.177 | 35.0 |
3/4 | 1.469 | .813 | .122/.177 | 41.2 |
7/8 | 1.750 | .938 | .136/.177 | 71.0 |
1 | 2.000 | 1.063 | .136/.177 | 93.8 |
1-1/8 | 2.250 | 1.188 | .136/.177 | 120 |
1-1/4 | 2.500 | 1.375 | .136/.177 | 144 |
1-3/8 | 2.750 | 1.531 | .136/.177 | 174 |
1-1/2 | 3.000 | 1.625 | .136/.177 | 208 |
1-5/8 | 3.250 | 1.770 | .178/.280 | 311 |
1-3/4 | 3.375 | 1.875 | .178/.280 | 328 |
1-7/8 | 3.500 | 2.000 | .178/.280 | 345 |
2 | 3.750 | 2.125 | .178/.280 | 398 |
2-1/4 | 4.000 | 2.407 | .240/.340 | 568 |
2-1/2 | 4.500 | 2.657 | .240/.340 | 734 |
2-3/4 | 5.000 | 2.907 | .240/.340 | 921 |
3 | 5.500 | 3.157 | .240/.340 | 1129 |
Bolt Size | Outer diameter | Slope | Weight |
---|---|---|---|
1/2 | 1.750 | 16-2/3% | 251 |
5/8 | 1.750 | 16-2/3% | 237 |
3/4 | 1.750 | 16-2/3% | 224 |
7/8 | 1.750 | 16-2/3% | 209 |
1 | 1.750 | 16-2/3% | 181 |
Sizes | USS | SAE | ||||
Outer Diameter | Inner Diameter | Thickness | Outer Diameter | Inner Diameter | Thickness | |
1/8 (#6) | 0.375 | 0.156 | .036/.065 | |||
5/32 (#8) | 0.438 | 0.188 | .036/.065 | |||
3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
7/32 (#12) | 0.562 | 0.250 | .051/.080 | |||
5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
1 5/8 | 3.750 | 1.750 | .153/.213 | |||
1 3/4 | 4.000 | 1.875 | .153/.213 | |||
1 7/8 | 4.250 | 2.000 | .153/.213 | |||
2 | 4.500 | 2.125 | .153/.213 | |||
2 1/4 | 4.750 | 2.375 | .320/.248 | |||
2 1/2 | 5.000 | 2.625 | .210/.280 | |||
2 3/4 | 5.250 | 2.875 | .228/.410S | |||
3 | 5.500 | 3.125 | .249/.327 |
Bolt Size | Outside Diameter | Inside Diameter | Thickness |
---|---|---|---|
1/2 | 1.063 | .531 | .097/.177 |
5/8 | 1.313 | .688 | .122/.177 |
3/4 | 1.469 | .813 | .122/.177 |
7/8 | 1.750 | .938 | .136/.177 |
1 | 2.000 | 1.063 | .136/.177 |
1-1/8 | 2.250 | 1.188 | .136/.177 |
1-1/4 | 2.500 | 1.375 | .136/.177 |
1-3/8 | 2.750 | 1.531 | .136/.177 |
1-1/2 | 3.000 | 1.625 | .136/.177 |
1-5/8 | 3.250 | 1.770 | .178/.280 |
1-3/4 | 3.375 | 1.875 | .178/.280 |
1-7/8 | 3.500 | 2.000 | .178/.280 |
2 | 3.750 | 2.125 | .178/.280 |
2-1/4 | 4.000 | 2.407 | .240/.340 |
2-1/2 | 4.500 | 2.657 | .240/.340 |
2-3/4 | 5.000 | 2.907 | .240/.340 |
3 | 5.500 | 3.157 | .240/.340 |
Sample Packing
Bubble Wrap Packing
Box Packing
Products | We supplied to following Locations |
---|---|
3/4'' stainless steel f436 flat washer | South Africa, Bahrain, Singapore |
astm f436 flat washer | France, Thailand, Europe, Qatar |
carbon steel zinc plated F436 spring washer | Philippines, Nigeria, Australia, UK |
USS/SAE F436 Zinc Plated Extra Thick Flat Washer | Oman, Malaysia, Hong Kong, UAE |
High Tensile Hardness F436 Flat Washers | Finland, Malaysia, USA, Bangladesh |
hot dipped galvanized stainless steel f436 flat washer | Italy, Iran, Chile, Singapore |
F436 washer high strength steel washer | United Arab Emirates, Norway, Malaysia, Turkey |
astm f436 flat washer m36 lock washer | Dammam -KSA, Indonesia, Belgium, Philippines. |
f436 hardened steel washer | Canada, Singapore, Malaysia, Philippines |
f436 din6916 din433 din7989 40mm id 52mm-57mm od stainless steel flat washer | Egypt, Spain, UK, Mexico |
Heavy f436 black washer | Ellington -United States, Poland, Canada, UK |
ASTM F436 Hardned Flat washers 3/4" black oxide | United Kingdom -UK, Europe, UAE, Malaysia |
ASTM F436 F436M HARDENED WASHER | Japan, Europe, Romania, Malaysia |
f436 galvanized countersunk washer | Germany, Czechia, Malaysia, Thailand |
f436 round structural flat washer | Colombia, Malaysia, Sweden, China |
Stainless Steel F436 Flat Washer | Dubai, Netherlands, Russia, Malaysia |
F436 Hardened Plain Steel Flat Washer 1/2" | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |