Components in applications that are involved in transmission services (High pressure) are produced using specification ASTM A694. High pressure applications cause a lot of stress or load on the component, especially during the conveyance or the flow of media across systems. Hence the materials used in the manufacture of ASTM A694 Flange must be from either carbon steel or alloy steel.
Cheaper of the two, carbon steels have a tensile strength that ranges between high to moderate, with high hardness, making them ideal for high pressure applications. They are durable, albeit lack corrosion resistance properties, which they make up for with their strength and economical cost. There are different grades available in the ASTM A694 carbon steel flange, most common of which are F52, F60 & F42. These components are also referred to as high yield carbon steel. Typically, the use of these high yield carbon steel Astm A694 F70 Threaded Flanges is with API designated pipes in systems. Hence, these flanges will match steel pipes in grades such as API 5L X42, X52, X60, as well as X65. Since carbon atoms form the primary alloyant in the chemical composition is why they are referred to as carbon steels. Under this specification, the SA694 F42 Socket weld Flanges include a higher content of manganese in their alloy. Manganese is used in alloying steels to improve their durability and hardness. This element also offers good abrasion resistance, hardenability and enhances the strength of these high yield carbon Astm A694 Grade F60 Slip On flange. Aside from manganese, small amounts of silicon, with trace contents of phosphorus and sulfur can be found in the alloy of ASME SA694 F52 Blind Flange.
Specifications | ASTM A694 / ASME SA694 |
Dimensions | ANSI/ASME B16.5, BS 10, B 16.47 Series A & B, B16.48, BS4504, EN-1092, DIN, etc. |
Standard | BS, ANSI, ASME, DIN, EN etc. |
Grades | F42, F46, F52, F60, F65, F70, A36, A516 Gr. 70, 60 |
Size | 1/2 Inch to 48 inch |
Class / Pressure | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS PN6, PN10, PN16, PN25, PN40, PN64 etc. |
Flanges Face Type | Lap-Joint Face, Raised Face, Ring Type Joint, Flat Face, Small Tongue, Large Male-Female, Small Male-Female, Large Tongue & Groove Flanges manufacturer and Supplier |
---|---|
Flanges Marking | All Flanges are marked as follows: Supplier or Manufacturer’s Name, Size, Class, Bore, Dimension, Material, Heat No. Or according to the customer’s request. |
Our Supplier and Distributors Located in | Ranchi, Hyderabad, Kanpur, Karachi, Bangalore, Perth, Lagos, Surat, Baroda, Pimpri Chinchwad, Caracas, Gujarat, Mumbai, Dammam, Riyadh, Ludhiana, Tehran, Coimbatore, Ahmedabad, Abu Dhabi, Thiruvananthapuram, Khobar, Ankara, Noida, Chennai, New Delhi, Montreal, Melbourne, Sydney, Santiago, Ernakulam, Ahvaz, Bogota, Gimhae si, Kolkata, Manama, Tau, Mexico, Vadodara, London, Istanbul, Bengaluru, Gurgaon, India, Nagpur, Muscat, Howrah, Jamshedpur, Janeiro, Kuwait, Ludhiana, Port of Spain, Rajkot, Courbevoie, Calgary, Indore |
Astm A694 F65 Weld Neck Flanges 1 inch Rtj 300# Sch40 Mss Sp 44
Astm A694 F65 Carbon Steel Flanges/a105 Wn Rtj Flanges
Astm A694 A150 Carbon Steel 2 Inch Pipe Flanges
Astm A694 F42 Carbon Steel Pipe Flange
Forged Carbon Steel Astm A694 F70 Welding Neck Flanges
150# Sorf Flange 14.3mm Astm A694 Gr. F 60
Weld Neck Flange 8inch Cl1500 Cs Astm A694 F-60 Normalized Sch160
3 Inch Nps Flange 600# Rf Wn astm-a694 F60
Astm A694 Gr F52 Wn Flanges
36 Inch 600# Anchor Flange 14.3mm Astm A694 Gr. F 60
Astm A694 F70 Wn Api Flange 10000psi Weld Neck Flat Face Flanges
Astm A694 F65 Carbon Steel Flanges 3/4 Flanges
Element | F42 | F52 | F60 | F65 | F70 |
Carbon (C) | 0.13~0.20 | 0.16~0.22 | 0.17~0.23 | 0.17~0.23 | 0.06~0.10 |
Silicon (Si) | 0.20~0.40 | 0.15~0.40 | 0.15~0.40 | 0.15~0.40 | 0.20~0.40 |
Manganese (Mn) | 1.20~1.60 | 1.10~1.40 | 1.20~1.50 | 1.30~1.60 | 1.10~1.40 |
Molybdenum (Mo) | 0.20~0.35 | 0.45~0.60 | 0.45~0.65 | 1.20~1.70 | |
Phosphorous (P) | ≤ 0.030 | ≤ 0.025 | ≤ 0.020 | ≤ 0.025 | ≤ 0.020 |
Sulfur (S) | ≤ 0.020 | ≤ 0.012 | ≤ 0.012 | ≤ 0.015 | ≤ 0.010 |
Chromium (Cr) | ≤ 0.30 | ≤ 0.30 | ≤ 0.25 | ≤ 0.30 | ≤ 0.30 |
Copper (Cu) | ≤ 0.25 | ≤ 0.25 | ≤ 0.25 | ≤ 0.25 | ≤ 0.25 |
Vanadium (V) | ≤ 0.050 | 0.02~0.06 | |||
Nickel (Ni) | ≤ 0.30 | ≤ 0.50 | 0.40~1.00 | ≤ 0.30 | 0.20~0.40 |
Niobium (Nb) | 0.025~0.050 | ||||
Pcm | ≤ 0.25 | ||||
Carbon Equivalent | ≤ 0.48 | ≤ 0.48 | ≤ 0.48 | ≤ 0.43 | ≤ 0.48 |
ASTM A694 Grade | Yield Strength minimum | Tensile Strength minimum | Elongation minimum | ||
MPa | ksi | MPa | ksi | % | |
A694 F42 | 290 | 42 | 415 | 65 | 20 |
A694 F46 | 315 | 46 | 415 | 60 | 20 |
A694 F48 | 330 | 48 | 425 | 62 | 20 |
A694 F50 | 345 | 50 | 440 | 64 | 20 |
A694 F52 | 360 | 52 | 455 | 66 | 20 |
A694 F56 | 385 | 56 | 470 | 68 | 20 |
A694 F60 | 415 | 60 | 515 | 75 | 20 |
A694 F65 | 450 | 65 | 530 | 77 | 20 |
A694 F70 | 485 | 70 | 565 | 82 | 18 |
Nominal Pipe Size | Dimension | Weight in Kg | ||||
---|---|---|---|---|---|---|
Normal Pipe Size (Inche) |
Diameter Nominal | Flange Outer Diameter in MM |
Flange Thickness in MM |
Socket Weld | Weld Neck | Blind |
8 | 200 | 342.9 | 28.4 | 12.1 | 17.6 | 19.6 |
3/4 | 20 | 98.6 | 12.7 | 0.6 | 0.7 | 0.6 |
1 | 25 | 108 | 14.2 | 0.8 | 1 | 0.9 |
1 1/4 | 32 | 117.3 | 15.7 | 1 | 1.3 | 1.2 |
1 1/2 | 40 | 127 | 17.5 | 1.3 | 1.7 | 1.5 |
2 | 50 | 152.4 | 19.1 | 2.1 | 2.6 | 2.4 |
2 1/2 | 65 | 177.8 | 22.4 | 3.3 | 4.1 | 3.9 |
1/2 | 15 | 88.9 | 11.2 | 0.4 | 0.5 | 0.4 |
3 | 80 | 190.5 | 23.9 | 3.9 | 4.9 | 4.9 |
24 | 600 | 812.8 | 47.8 | 86.9 | 115 | 185.0 |
3 1/2 | 90 | 215.9 | 23.9 | 4.8 | 6.1 | 6.2 |
4 | 100 | 228.6 | 23.9 | 5.3 | 6.8 | 7.0 |
5 | 125 | 254 | 23.9 | 6.1 | 8.6 | 8.6 |
6 | 150 | 279.4 | 25.4 | 7.5 | 10.6 | 11.3 |
10 | 250 | 406.4 | 30.2 | 16.5 | 24 | 28.6 |
14 | 350 | 533.4 | 35.1 | 34.6 | 48.4 | 58.1 |
12 | 300 | 482.6 | 31.8 | 26.2 | 36.5 | 43.2 |
16 | 400 | 596.9 | 36.6 | 44.8 | 60.6 | 76.1 |
18 | 450 | 635 | 39.6 | 48.9 | 68.3 | 93.7 |
20 | 500 | 698.5 | 42.9 | 61.9 | 84.5 | 122.0 |
Temp. ℃ | 75 | 150 | 300 | 400 | 600 | 900 |
-29 to 38 | 10.0 | 20.0 | 51.7 | 68.9 | 103.4 | 155.1 |
100 | 8.8 | 17.7 | 50.7 | 67.5 | 101.3 | 152.0 |
150 | 7.9 | 15.8 | 45.9 | 61.2 | 91.9 | 137.8 |
200 | 6.9 | 13.8 | 42.7 | 56.9 | 85.3 | 128.0 |
250 | 6.0 | 12.1 | 40.5 | 53.9 | 80.9 | 121.4 |
300 | 5.1 | 10.2 | 38.9 | 51.8 | 77.7 | 116.6 |
50 | 9.8 | 19.5 | 51.7 | 68.9 | 103.4 | 155.1 |
Products | We supplied to following Locations |
---|---|
Astm A694 F65 Weld Neck Flanges 1 inch Rtj 300# Sch40 Mss Sp 44 | Sweden, China, Malaysia, Colombia |
Astm A694 F65 Carbon Steel Flanges/a105 Wn Rtj Flanges | Netherlands, Russia, Malaysia, Dubai |
Astm A694 A150 Carbon Steel 2 Inch Pipe Flanges | Philippines, UK, Australia, Nigeria |
Astm A694 F42 Carbon Steel Pipe Flanges | Oman, UAE, Hong Kong, Malaysia |
Forged Carbon Steel Astm A694 F70 Welding Neck Flanges | Canada, Malaysia, Philippines, Singapore |
150# Sorf Flanges 14.3mm Astm A694 Gr. F 60 | Chile, Singapore, Iran, Italy |
Astm A694 F65 Flanges | United Arab Emirates (UAE), Norway, Turkey, Malaysia |
Astm A694 F65 Forged Flanges | United Kingdom -UK, Malaysia, Europe, UAE |
Weld Neck Flanges 8inch Cl1500 Cs Astm A694 F-60 Normalized Sch160 | Dammam -KSA, Belgium, Philippines, Indonesia. |
3 Inch Nps Flanges 600# Rf Wn astm-a694 F60 | Qatar, Thailand, Europe, France. |
Astm A694 Gr F52 Wn Flanges | Malaysia, Thailand, Germany, Czechia |
36 Inch 600# Anchor Flanges 14.3mm Astm A694 Gr. F 60 | South Africa, Bahrain, Singapore, Singapore |
Astm A694 F70 Wn Api Flanges 10000psi Weld Neck Flat Face Flanges | Finland, Bangladesh, Malaysia, USA |
Astm A694 F65 Carbon Steel Flanges 3/4 Flanges | Saudi Arabia (KSA), Kuwait, South Africa, Brazil |
Pn10 Dn700 Astm A694 F60 F70 A694 F52 Steel Flanges | Egypt, UK, Mexico, Spain |
Forged Ansi B16.5 Welded Neck Astm A694 Alloy Steel Flanges | UK, Ellington -United States, Poland, Canada |
Astm A649 F60 Steel Flanges | Japan, Romania, Europe, Malaysia |