ASME SA453 Gr 660 Hex Bolts and A453 Grade 660 Threaded Rod Manufacturer In India
Precipitation hardening austenitic stainless steel like grade 660 has an optimized level of strength and hardness due to the alloys being hardened with a subsequent hardening process. This alloy is to be solution annealed, after which the ASTM A453 Grade 660 Bolts are to be quenched with the use of water. The hardening of this type of steel is possible by aging.
Although there is a significant increase in the level of hardening in this alloy, this is a property of the ASTM A453 Gr 660 Lag Bolts that remains lower in comparison to martensitic grades. This is possible because they retain their austenitic microstructure after annealing and hardening. To take up their tensile strength properties to the next level, using a cold working process prior to aging the A453 Grade 660 Threaded Rod will yield a stronger fastener grade. Cold working also brings out a surface that has a better finish and better ductility. This alloy is suited to applications that involve elevated thermal levels as high as 1300°F. The SA453 Grade 660 Bolts have the ability to bear a high temperature is due to the higher content of nickel added in its chemistry. Since the nickel content is relatively high at about 24% - 27% of the weight of the alloy, on some occasions, this alloy could be classified as a nickel alloy. Apart from being used at high temperatures, the other advantage of nickel in the chemistry of the ASTM A453 Grade 660 Double Ended Studs is that it acts as an austenite stabilizing element, despite undergoing an aging process. Testing is an integral part of specification ASTM A453, and therefore the ASTM A453 Grade 660 Fastener is tested for several parameters including hardness (Brinell & Rockwell), elongation, tensile strength, and yield strength.
Most Trusted Manufacturer of Extra Fine UNEF threads ASTM A453 Grade 660 Stud Bolts in India, Check SA453 Gr 660 Chemical Composition
Table of Content
- ASTM A453 Grade 660 Bolts Material Specification Chart
- Chemical Structure Of ASME SA453 Gr 660 Hex Bolt
- Mechanical Characteristics Of ASTM A453 Grade 660 Stud Bolts
- SA 453 Gr 660 Bolts Equivalent Material Grade
- ASTM A453 660 Stainless Steel Bolts Type
- SA453 Gr 660 Stainless Steel Nuts Types
- Astm A453 660 Stud Bolt Type
- Types of ASME SA453 Grade 660 Screws
- ASTM A453 660 Washers Types
- ASTM A453 Gr 660 Fasteners Sizes Available
- Why ASME SA 453 Gr 660 Fasteners Are Used In pressure vessels?
- ASTM A453 660 Stainless Steel Hex Bolt Price In India
- Why choose Vinesh Steel to buy Asme Sa 453 660 Fasteners?
- Quality and Test reports Of Astm A453 Grade 660 Bolts and Nuts
- ASTM A453 660 Stud Bolt Torque Chart
- Astm A453 660 bolt and nut grade markings
- ASTM A453 Gr 660 Studs Bolt Sizes
- SA453 Gr 660 Stainless Steel Threaded Rod threads type
- Astm A453 Grade 660 Nut Weight Chart
- din standard for Astm A453 660 Stainless Steel hex head bolts
- Sa453 Gr 660 Hex Bolts dimensions
- different Asme Sa 453 660 bolt head styles
- ASTM A453 Grade 660 Nut Bolt Packing
- SA453 Gr 660 Stainless Steel screw head drive types
- surface finish of ASTM A453 660 bolts
- ASTM A453 Gr 660 plain washer weight chart
- Asme Sa 453 660 hex nut thread types
ASTM A453 Grade 660 Bolts Specification Chart
| Dimensions | ASME B18.2.1, B18.3 |
|---|---|
| Standard | ASTM A453 gr 660/ ASME SB453 gr 660 |
| Melt Origin | Korea, Japan, South America, East Europe |
| Mandatory Requirements | Free from Radioactive Contaminationand Mercury |
| Certification | Dual Certified As per ASTM and ASME Standards |
| Additional Requirements | NACE MR0103 / ISO 15156 Compliance / MR0175 |
| Threads Configuration | B1.1 2A or 3A Inch Unified Threads B1.13M 6h Metric Coarse Threads |
Chemical Structure Of ASME SA453 Gr 660 Flange Nut
| Element | ASTM A563 Grade 660 |
|---|---|
| Carbon | 0.08 |
| Manganese | 2 |
| Phosphorus | 0.040 |
| Sulfur | 0.030 |
| Silicon | 1 |
| Nickel | 24 To 27 |
| Chromium | 13.5 To 16 |
| Molybdenum | 1 To 1.50 |
| Tungsten | - |
| Titanium | 1.9 To 2.35 |
| Columbium | - |
| Aluminum | 0.35 |
| Vanadium | 0.10 To 0.50 |
| Boron | 01 To 0.010 |
| Copper | To |
Mechanical Characteristics Of ASTM A453 Grade 660 Nuts
Oldest SA453 Grade 660 Heavy Hex Bolts Manufacturer in India, ASTM A453 Gr 660 Socket Head Cap Screws Supplier, Check Heat-treated Grade 660 Stud Bolt Dimension Chart
| Grade | Tensile Strength | Yield Strength | Elongation | Reduction of Area | Hardness | Rockwell | |||
|---|---|---|---|---|---|---|---|---|---|
| Ksi | Mpa | Ksi | Mpa | minimum | maximum | ASTM A453 Grade 660 C | 130 | 895 | 85 | 585 | 15 | 18 | 248 To 341 | 24 | 37 |
SA 453 Gr 660 Weld Nut Equivalent Material Grade
| AISI | unified numbering system | British Standards | werkstoff No | European Standards | Director Identification Number | Japan Industrial Standard | AMS | ASTM | Other | |
|---|---|---|---|---|---|---|---|---|---|---|
| 660 | S 66286 | HR 51 | 1.4944 | X6NiCrTiMoV26-15 | 10269 | SUS 660 | 5726 | ASTM A453 Grade 660 | incoloy a286 | |
ASTM A453 660 Stainless Steel Bolts Type
ASTM A453 Grade 660 Bolts
Astm A453 Grade 660 Hex Bolts
ASTM A453 660 Stainless Steel Heavy Hex Bolts
ASTM A453 Grade 660 Flange Bolts
Astm A453 660 Carriage Bolt
ASTM A453 Gr 660 Bolt
SA453 Gr 660 Stainless Steel Nuts Types
SA453 Gr 660 Stainless Steel Hex Nuts
ASME SA 453 Grade 660 Nyloc Nuts
ASTM A453 Grade 660 Nut
ASME SA453 Gr 660 Self Locking Nuts
ASME SA453 Grade 660 Flange Nuts
Asme Sa 453 660 Nut
Astm A453 660 Stud Bolt Type
Asme Sa 453 660 Threaded Rod
Asme Sa 453 660 Studs
SA453 Gr 660 Stainless Steel Double Ended Studs
ASTM A453 Gr 660 Fully Threaded Studs
ASTM A453 660 Unc Stud Bolt
Astm A453 Grade 660 Stud Bolts
Types of ASME SA453 Grade 660 Screws
Astm A453 660 Socket Head Cap Screws
SA453 Gr 660 Stainless Steel Self Tapping Screws
SA 453 Gr 660 Set Screw
ASTM A453 Gr 660 Cap Screw
ASTM A453 660 Coach Screws
ASTM A453 660 Screws
ASTM A453 660 Washers Types
Sa 453 660 Flat Washer
Astm A453 660 Stainless Steel Fender Washer
ASTM A453 660 Stainless Steel Belleville Washer
Sa453 Gr 660 Washer
ASTM A453 Grade 660 Spring Washer
ASME SA 453 Gr 660 Lock Washer
ASTM A453 Gr 660 Fasteners Sizes Available
Why ASME SA 453 Gr 660 Fasteners Are Used In pressure vessels?
ASTM A453 Grade 660 Bolts is a material detail for screws, studs, nuts and different clasp, planned for use in high temperature bolting applications. Grade 660 fasteners are utilized in pressure vessels, darting boilers, pipeline flanges and valves, expected for high temperature service.
ASTM A453 660 Stainless Steel Hex Bolt Price In India
Buy Astm A453 Grade 660 Class A Hex Bolts at a reasonable price, Manufacturer of SA453 Gr 660 Threaded Rod, View Partially/ Fully Threaded A453 Gr 660 Stud Bolts Dimension
| Description | Price Per Piece in INR | Price Per Piece in USA $ | Price Per Piece in UAE Dirham |
|---|---|---|---|
| ASTM A453 660 GR.A B C D stud bolt with two nuts | INR 14.86 | USA $ 0.20 | AED 0.73 |
| ASTM A453 Grade 660A/B/C Stud Bolt | INR 37.15 | USA $ 0.50 | AED 1.84 |
| ASTM A453 GR.660A stud bolt with full threaded stud bolts | INR 66.87 | USA $ 0.90 | AED 3.31 |
| ASTM A453 Grade 660 Heavy Hex Bolts and Nuts | INR 7.43 | USA $ 0.10 | AED 0.37 |
| ASTM A453 GRADE 660. A-286 Socket Head Cap Screws | INR 37.15 | USA $ 0.50 | AED 1.84 |
Why choose Vinesh Steel to buy Asme Sa 453 660 Fasteners?
We are well known ASTM A453 Grade 660 Bolts Manufacturers in India, We provide following services to our customers
- Free Samples
- Third Party Inspection
- Mill Test Certificate is supplied with shipment
- Resonable Prices
- Timely delivery
Quality and Test reports Of Astm A453 Grade 660 Bolts and Nuts
- Third Party Inspection
- EN 10204/3.1B
- Raw Materials Certificate
- 100% Radiography Test
- Mill test
ASTM A453 660 Stud Bolt Torque Chart
| Diameter | Torque Feet/Lbs | ||
| 30% | 70% | 100% | |
| 9/16 | 23 | 53 | 75 |
| 1/2 | 16 | 36 | 52 |
| 5/8 | 31 | 73 | 104 |
| 7/8 | 71 | 166 | 237 |
| 3/4 | 55 | 129 | 184 |
| 1 | 107 | 249 | 356 |
| 1.1/4 | 179 | 417 | 596 |
| 1.1/8 | 127 | 297 | 424 |
| 1.3/8 | 186 | 435 | 622 |
| 1.9/16 | 168 | 392 | 560 |
| 1.1/2 | 246 | 574 | 821 |
| 1.5/8 | 191 | 445 | 636 |
| 1.7/8 | 298 | 696 | 994 |
| 1.3/4 | 240 | 561 | 801 |
| 2 | 366 | 853 | 1219 |
| 3 | 1289 | 3008 | 4297 |
| 2.1/2 | 733 | 1709 | 2442 |
| 2.1/4 | 529 | 1234 | 1762 |
| 2.3/4 | 986 | 2300 | 3285 |
Astm A453 660 bolt and nut grade markings
- Brinell Hardness Number
- Supplier and Manufacturer’s Name
- Grade
- Heat Code
- ASTM Specification
- Nominal Diameter
ASTM A453 Gr 660 Studs Bolt Sizes
| Diameter | Diameter in mm | Diameter in inch | Nut Sizes |
|---|---|---|---|
| M12 | 12 | 0.4724 | 19 |
| M10 | 10 | 0.3937 | 17 |
| M14 | 14 | 0.5512 | 22 |
| M18 | 18 | 0.7087 | 27 |
| M16 | 16 | 0.6299 | 24 |
| M20 | 20 | 0.7874 | 30 |
| M24 | 24 | 0.9449 | 36 |
| M22 | 22 | 0.8661 | 32 |
| M27 | 27 | 1.063 | 41 |
| M33 | 33 | 1.2992 | 50 |
| M30 | 30 | 1.1811 | 46 |
| M36 | 36 | 1.4173 | 55 |
| M42 | 42 | 1.6535 | 65 |
| M39 | 39 | 1.5354 | 60 |
| M45 | 45 | 1.7717 | 70 |
| M52 | 52 | 2.0472 | 80 |
| M48 | 48 | 1.8898 | 75 |
| M56 | 56 | 2.2047 | 85 |
| M64 | 64 | 2.5197 | 95 |
| M60 | 60 | 2.3622 | 90 |
| M68 | 68 | 2.6772 | 100 |
| M76 | 76 | 2.9921 | 110 |
| M72 | 72 | 2.8346 | 105 |
| M80 | 80 | 3.1496 | 115 |
| M90 | 90 | 3.5433 | 130 |
| M85 | 85 | 3.3464 | 120 |
| M100 | 100 | 3.937 | 145 |
| M160 | 160 | 6.2992 | 230 |
| M125 | 125 | 4.9212 | 180 |
| M110 | 110 | 4.3307 | 155 |
| M140 | 140 | 5.5118 | 200 |
SA453 Gr 660 Stainless Steel Threaded Rod threads type
- Right Hand
- Left Hand
Astm A453 Grade 660 Nut Weight Chart
Metric ASTM A453 Grade 660 Self Tapping Screws Manufacturers in India, View M1.4 to M30 Metric Size SA453 Gr 660 Stud Bolts, and Grade 660 Flat Washer Weight Chart
| Sizes | Weight per Metre | Size (UNC) | Weight per Meter |
|---|---|---|---|
| M2 | 0.0187 | ||
| M2.5 | 0.030 | ||
| M3 | 0.044 | ||
| M3.5 | 0.060 | ||
| M4 | 0.078 | ||
| M5 | 0.124 | ||
| M6 | 0.177 | ¼ | 0.194 |
| M8 | 0.319 | 5/16 | 0.323 |
| M10 | 0.500 | 3/8 | 0.469 |
| 7/16 | 0.650 | ||
| M12 | 0.725 | ½ | 0.896 |
| M14 | 0.970 | 9/16 | 1.096 |
| M16 | 1.330 | 5/8 | 1.342 |
| M18 | 1.650 | ||
| M20 | 2.080 | ¾ | 2.021 |
| M22 | 2.540 | 7/8 | 2.756 |
| M24 | 3.000 | 1 | 3.638 |
| M27 | 3.850 | 1 1/8 | 4.545 |
| M30 | 4.750 | 1 ¼ | 5.718 |
| M33 | 5.900 | 1 3/8 | 6.842 |
| M36 | 6.900 | 1 ½ | 8.281 |
| M39 | 8.200 | 1 5/8 | 9.726 |
| M42 | 9.400 | 1 ¾ | 11.231 |
| M45 | 11.000 | 1 7/8 | 13.038 |
| M48 | 12.400 | 2 | 14.741 |
Din Standard For Astm A453 660 Stainless Steel Hex Head Bolts
- DIN 931
- DIN 933
- DIN 960
- DIN 961
- DIN 7990
- DIN 610
Sa453 Gr 660 Hex Bolts dimensions
| Nominal Size | F | G | H | ||||||
| Width Across Flats | Width Across Corners | Thickness | |||||||
| Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | |||
| 1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
| 3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
| 5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
| 7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
| 9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
| 1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
| 5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
| 7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
| 3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
| 1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
| 1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
| 1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
| 1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
| 1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
| 1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
| 2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
| 2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
| 2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
| 2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
different Asme Sa 453 660 bolt head styles
ASTM A453 Grade 660 Nut Bolt Packing
Sample Packing
Bubble Wrap Packing
Box Packing
SA453 Gr 660 Stainless Steel screw head drive types
surface finish of ASTM A453 660 bolts
- Anodizing
- Cadmium
- Ptfe Coated Silicon Bronze Bolts
- Plated zinc-nickel
- Zinc Alluminium Flake Coating
- Manganese Phosphate
- Zinc Electro Plating
- Dacroment
- Bright Zinc Plated
- Teflon
- Zinc Phosphat
- Sherardized
- Self-Colour
- Nickel plated
- Xylon
- Phosphate
- Geometry
ASTM A453 Gr 660 plain washer weight chart
| Sizes | USS | SAE | ||||
| Outer Diameter | Inner Diameter | Thickness | Outer Diameter | Inner Diameter | Thickness | |
| 1/8 (#6) | 0.375 | 0.156 | .036/.065 | |||
| 5/32 (#8) | 0.438 | 0.188 | .036/.065 | |||
| 3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
| 7/32 (#12) | 0.562 | 0.250 | .051/.080 | |||
| 1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
| 5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
| 3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
| 7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
| 1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
| 7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
| 1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
| 1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
| 1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | |||
| 1 3/4 | 4.000 | 1.875 | .153/.213 | |||
| 1 7/8 | 4.250 | 2.000 | .153/.213 | |||
| 2 | 4.500 | 2.125 | .153/.213 | |||
| 2 1/4 | 4.750 | 2.375 | .320/.248 | |||
| 2 1/2 | 5.000 | 2.625 | .210/.280 | |||
| 2 3/4 | 5.250 | 2.875 | .228/.410S | |||
| 3 | 5.500 | 3.125 | .249/.327 | |||
Asme Sa 453 660 Hex Nut Thread Types
