Hot Forged and Cold Formed ASME Sa 193 Grade B6x Threaded Rod manufacturer in India
Grade B6X is classified as a martensitic stainless steel alloy. Otherwise referred to as grade 410, it differs from grade B6 by a small modification in its chemical composition. While B6 contains about 12% chromium in its alloy, the material used to produce ASTM A193 Grade B6X Bolts contains 13% chromium. The modification done in the stainless steel alloy improves its mechanical characteristics and its resistance to corrosion. Quenching and tempering this alloy yields a tougher and harder stainless steel grade, making it possible for the A193 Grade B6x Hex Bolt to be used across several industries. In particular, this alloy works well as an engineering grade, especially in the food and beverage industry, and sugar processing industry.
There are natural acids and alkalis found in food, which over a period of time could cause corrosion and break down the equipment. Since this alloy is resilient to the effects of the chemicals found in food, and they can withstand elevated temperatures, the Astm A193 B6x Nuts are considered to be ideal for the food and beverage industry. Martensitic stainless steels that have not been tempered are rigid and brittle. Engineering applications are very demanding and often cause stress due to the use of a wide temperature and pressure range. For equipment to withstand such stress, they need to be tough, which is why a combination of heat treatments is always used on the ASTM A193 B6x Threaded Rod. Generally, hardening is achieved by treating the alloy to a QT or a quenching and tempering treatment. However, it is also possible to harden the alloy by both quenching and stress relieving the Sa 193 Gr B6x Stud Bolts. It is usually not possible to use a conventional alloy at temperatures as high as 1292°F, because they undergo rapid corrosion by oxidation. Yet, chromium increases the creep strength of the alloy, which makes it possible for the Astm A193 B6x Fasteners to be used in continuous service, despite exposure to elevated temperatures.
Buy ASTM A193 Grade B6x Hex Bolt from manufacturers and Supplier in India for high quality and better price
Table of Content
- ASTM A193 Grade B6X Bolts Specification Chart
- A193 B6X Hex Bolt Chemical Composition
- Mechanical Properties Table Of Astm A193 B6X Stud Bolts
- Astm A193 B6X Bolts Equivalent
- ASTM A193 B6X Bolts Type
- SA193 Gr B6X Stainless Steel Nuts Types
- Astm A193 B6X Stainless Steel Stud Bolt Type
- Types of ASME SA 193 Gr B6X Screws
- ASTM A193 Grade B6X Washers Types
- SA193 Gr B6X Stainless Steel Fasteners Sizes Available
- Why A193 B6X Stainless Steel Fasteners Are Used In Power Generation and Petrochemicals?
- Asme Sa 193 B6X Hex Bolt Price In India
- Why choose Vinesh Steel to buy Sa 193 B6X Fasteners?
- SA193 Gr B6X Stainless Steel Stud Bolt Torque Chart
- ASTM A193 Gr B6X bolt and nut grade markings
- Quality and Test reports Of A193 B6X Stainless Steel Bolts and Nuts
- ASTM A193 Grade B Studs Bolt Sizes
- ASTM A193 Gr B6X Threaded Rod threads type
- Astm A193 Grade B6X Nut Weight Chart
- din standard for Asme Sa 193 B6X hex head bolts
- SA 193 Gr B6X Hex Bolts dimensions
- different ASME SA193 Grade B6X bolt head styles
- ASME SA193 Gr B6X screw head drive types
- surface finish of Asme Sa 193 B6X bolts
- Astm A193 Grade B6X plain washer weight chart
- ASTM A193 B6X hex nut thread types
- ASME SA 193 Grade B6X Nut Bolt Packing
ASTM A193 Grade B6X Bolts Specification Chart
| Dimensions | ASME B18.2.1, B18.3 |
|---|---|
| Standard | ASTM A193 B6X/ ASME SB193 B6X |
| Melt Origin | Korea, Japan, South America, East Europe |
| Mandatory Requirements | Free from Radioactive Contaminationand Mercury |
| Certification | Dual Certified As per ASTM and ASME Standards |
| Additional Requirements | NACE MR0103 / ISO 15156 Compliance / MR0175 |
| Threads Configuration | B1.1 2A or 3A Inch Unified Threads B1.13M 6h Metric Coarse Threads |
| Supplier and Distributors Located in | Karachi, Calgary, Coimbatore, Ernakulam, Ranchi, Istanbul, Ludhiana, Bogota, Gurgaon, Santiago, Rajkot, Bengaluru, Dammam, India, Port of Spain, Hyderabad, Kanpur, Kuwait, Muscat, Pimpri Chinchwad, Ahmedabad, Baroda, Gujarat, Vadodara, Tehran, Surat, Howrah, Mexico, Abu Dhabi, Sydney, London, Montreal, New Delhi, Gimhae si, Ahvaz, Caracas, Thiruvananthapuram, Ludhiana, Jamshedpur, Nagpur, Janeiro, Tau, Mumbai, Riyadh, Kolkata, Lagos, Melbourne, Chennai, Noida, Khobar, Perth, Indore, Ankara, Courbevoie, Manama, Bangalore |
A193 B6X Hex Bolt Chemical Composition
Check online price of ASME SA193 B6X Hex Bolts and Nuts ex Mumbai, Buy A193 Grade B6x Self Tapping Screws M1.4 to M30 Metric Size at the best price
| Carbon | 0.08 To 0.15 |
|---|---|
| Manganese | 1 |
| Phosphorus | 0.040 |
| Sulfur | 11.5 To 13.5 |
| Chromium | 0.030 |
| Silicon | 1 |
Mechanical Properties Table Of Astm A193 B6X Stud Bolts
| Diameter in inch | Tensile Strength | Yield Strength | Elongation | Reduction | Hardness | |
|---|---|---|---|---|---|---|
| HBW | HRC | |||||
| 4 | 100 | 80 | 16 | 50 | 321 | 35 |
Astm A193 B6X Bolts Equivalent
| ASTM | AISI | UNS |
|---|---|---|
| ASTM A193 GRADE B6X | 410 | 41000 |
ASTM A193 B6X Bolts Type
Astm A193 Grade B6x Bolt
A193 B6X Heavy Hex Bolts
A193 B6X Stainless Steel Hex Bolts
A193 Grade B6x Flange Bolts
A193 Gr B6X Bolt
ASTM A193 Grade B6X Carriage Bolt
SA193 Gr B6X Stainless Steel Nuts Types
A193 Gr B6X Hex Nuts
Astm A193 B6X Flange Nuts
Sa193 Gr B6X Nyloc Nuts
Astm A193 Grade B6X Lock Nut
A193 Grade B6X Nut
Asme Sa 193 B6X Self Locking Nuts
Astm A193 B6X Stainless Steel Stud Bolt Type
Asme Sa 193 B6X Threaded Rod
SA 193 Gr B6X Fully Threaded Studs
ASME SA193 Grade B6X Studs
Astm A193 B6X Stainless Steel Stud Bolts
A193 B6X Stainless Steel Double Ended Studs
A193 B6X Unc Stud Bolt
Types of ASME SA 193 Gr B6X Screws
ASME SA 193 Gr Socket Head Cap Screws
Sa 193 B6X Self Tapping Screws
SA193 Gr B6X Stainless Steel Screws
A193 Gr B6X Cap Screw
Astm A193 Grade B6X Coach Screws
ASME SA193 Gr B6X Set Screw
ASTM A193 Grade B6X Washers Types
Astm A193 B6X Flat Washer
ASME SA 193 Grade B6X Lock Washer
SA193 Gr B6X Stainless Steel Belleville Washer
A193 B6X Washer
Asme Sa 193 B6X Fender Washer
SA193 Gr B6X Stainless Steel Spring Washer
SA193 Gr B6X Stainless Steel Fasteners Sizes Available
Why A193 B6X Stainless Steel Fasteners Are Used In Power Generation and Petrochemicals?
TheASTM A193 Grade B6X Bolts is also known to offer protection against galling in specific applications, Some of the features offered by the ASME Sa 193 Grade B6x Threaded Rod includes its durable and sturdy construction, resistance to wear and tear, improved resistance to corrosion, excellent tensile as well as yeild strength.
Asme Sa 193 B6X Hex Bolt Price In India
| Description | Price Per Piece in INR | Price Per Piece in USA $ | Price Per Piece in UAE Dirham |
|---|---|---|---|
| ASTM A193 Grade B7 Full Thread Stud Bolts And Nuts | INR 7.42 | USA $ 0.10 | AED 0.37 |
| Studs And Bolts B6x Astm A193 B6 | INR 2.23 | USA $ 0.03 | AED 0.11 |
| m12 high tensile black astm a193 grade b7 stud bolt | INR 7.42 | USA $ 0.10 | AED 0.37 |
| m8x50 bolts bolt astm a193 b7m | INR 14.84 | USA $ 0.20 | AED 0.73 |
| Full Thread ASTM A193 B7 Stud Bolt | INR 1.48 | USA $ 0.02 | AED 0.073 |
Why choose Vinesh Steel to buy Sa 193 B6X Fasteners?
We are well known ASTM A193 Grade B6X Bolts Manufacturers in India, We provide following services to our customers
- Free Samples
- Third Party Inspection
- Mill Test Certificate is supplied with shipment
- Resonable Prices
- Timely delivery
SA193 Gr B6X Stainless Steel Stud Bolt Torque Chart
| Diameter | Torque Feet/Lbs | ||
| 30% | 70% | 100% | |
| 9/16 | 23 | 53 | 75 |
| 1/2 | 16 | 36 | 52 |
| 5/8 | 31 | 73 | 104 |
| 7/8 | 71 | 166 | 237 |
| 3/4 | 55 | 129 | 184 |
| 1 | 107 | 249 | 356 |
| 1.1/4 | 179 | 417 | 596 |
| 1.1/8 | 127 | 297 | 424 |
| 1.3/8 | 186 | 435 | 622 |
| 1.9/16 | 168 | 392 | 560 |
| 1.1/2 | 246 | 574 | 821 |
| 1.5/8 | 191 | 445 | 636 |
| 1.7/8 | 298 | 696 | 994 |
| 1.3/4 | 240 | 561 | 801 |
| 2 | 366 | 853 | 1219 |
| 3 | 1289 | 3008 | 4297 |
| 2.1/4 | 529 | 1234 | 1762 |
| 2.1/2 | 733 | 1709 | 2442 |
| 2.3/4 | 986 | 2300 | 3285 |
ASTM A193 Gr B6X bolt and nut grade markings
- Brinell Hardness Number
- Supplier and Manufacturer’s Name
- Grade
- Heat Code
- ASTM Specification
- Nominal Diameter
Quality and Test reports Of ASTM A193 B6X Stainless Steel Bolts and Nuts
- Third Party Inspection
- EN 10204/3.1B
- Raw Materials Certificate
- 100% Radiography Test
- Mill test
ASTM A193 Grade B Studs Bolt Sizes
| Diameter | Diameter in mm | Diameter in inch | Nut Sizes |
|---|---|---|---|
| M12 | 12 | 0.4724 | 19 |
| M10 | 10 | 0.3937 | 17 |
| M14 | 14 | 0.5512 | 22 |
| M18 | 18 | 0.7087 | 27 |
| M16 | 16 | 0.6299 | 24 |
| M20 | 20 | 0.7874 | 30 |
| M24 | 24 | 0.9449 | 36 |
| M22 | 22 | 0.8661 | 32 |
| M27 | 27 | 1.063 | 41 |
| M33 | 33 | 1.2992 | 50 |
| M30 | 30 | 1.1811 | 46 |
| M36 | 36 | 1.4173 | 55 |
| M42 | 42 | 1.6535 | 65 |
| M39 | 39 | 1.5354 | 60 |
| M45 | 45 | 1.7717 | 70 |
| M52 | 52 | 2.0472 | 80 |
| M48 | 48 | 1.8898 | 75 |
| M56 | 56 | 2.2047 | 85 |
| M64 | 64 | 2.5197 | 95 |
| M60 | 60 | 2.3622 | 90 |
| M68 | 68 | 2.6772 | 100 |
| M76 | 76 | 2.9921 | 110 |
| M72 | 72 | 2.8346 | 105 |
| M80 | 80 | 3.1496 | 115 |
| M90 | 90 | 3.5433 | 130 |
| M85 | 85 | 3.3464 | 120 |
| M100 | 100 | 3.937 | 145 |
| M160 | 160 | 6.2992 | 230 |
| M125 | 125 | 4.9212 | 180 |
| M110 | 110 | 4.3307 | 155 |
| M140 | 140 | 5.5118 | 200 |
ASTM A193 Gr B6X Threaded Rod threads type
- Right Hand
- Left Hand
Astm A193 Grade B6X Nut Weight Chart
PED and ISO Certified Sa 193 Gr B6x Stud Bolts manufacturers in Mumbai, View UNF/ UNC threads ASTM A193 Grade B6x Csk Allen Bolt Weight and Size Chart
| Sizes | Weight per Metre | Size (UNC) | Weight per Meter |
|---|---|---|---|
| M2 | 0.0187 | ||
| M2.5 | 0.030 | ||
| M3 | 0.044 | ||
| M3.5 | 0.060 | ||
| M4 | 0.078 | ||
| M5 | 0.124 | ||
| M6 | 0.177 | ¼ | 0.194 |
| M8 | 0.319 | 5/16 | 0.323 |
| M10 | 0.500 | 3/8 | 0.469 |
| 7/16 | 0.650 | ||
| M12 | 0.725 | ½ | 0.896 |
| M14 | 0.970 | 9/16 | 1.096 |
| M16 | 1.330 | 5/8 | 1.342 |
| M18 | 1.650 | ||
| M20 | 2.080 | ¾ | 2.021 |
| M22 | 2.540 | 7/8 | 2.756 |
| M24 | 3.000 | 1 | 3.638 |
| M27 | 3.850 | 1 1/8 | 4.545 |
| M30 | 4.750 | 1 ¼ | 5.718 |
| M33 | 5.900 | 1 3/8 | 6.842 |
| M36 | 6.900 | 1 ½ | 8.281 |
| M39 | 8.200 | 1 5/8 | 9.726 |
| M42 | 9.400 | 1 ¾ | 11.231 |
| M45 | 11.000 | 1 7/8 | 13.038 |
| M48 | 12.400 | 2 | 14.741 |
din standard for Asme Sa 193 B6X hex head bolts
- DIN 931
- DIN 933
- DIN 960
- DIN 961
- DIN 7990
- DIN 610
SA 193 Gr B6X Hex Bolts dimensions
| Nominal Size | F | G | H | ||||||
| Width Across Flats | Width Across Corners | Thickness | |||||||
| Maximum | Minimum | Maximum | Minimum | Basic | Maximum | Minimum | |||
| 1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
| 3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
| 5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
| 7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
| 9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
| 1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
| 5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
| 7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
| 3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
| 1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
| 1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
| 1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
| 1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
| 1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
| 1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
| 2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
| 2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
| 2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
| 2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
different ASME SA193 Grade B6X bolt head styles
ASTM SA193 Gr B6X screw head drive types
surface finish of Asme Sa 193 B6X bolts
- Teflon
- Sherardized
- Plated zinc-nickel
- Zinc Alluminium Flake Coating
- Phosphate
- Manganese Phosphate
- Cadmium
- Zinc Electro Plating
- Ptfe Coated Silicon Bronze Bolts
- Dacroment
- Bright Zinc Plated
- Xylon
- Zinc Phosphat
- Anodizing
- Self-Colour
- Nickel plated
- Geometry
Astm A193 Grade B6X plain washer weight chart
Manufacturer and supplier of ASME SA193 B6X Flat Washer and A193 Gr B6X Studs in India, Check Extra Fine UNEF threads ASTM A193 Grade B6x Threaded Bolts Dimensions, Thickness and Weight Chart
| Sizes | USS | SAE | ||||
| Outer Diameter | Inner Diameter | Thickness | Outer Diameter | Inner Diameter | Thickness | |
| 1/8 (#6) | 0.375 | 0.156 | .036/.065 | |||
| 5/32 (#8) | 0.438 | 0.188 | .036/.065 | |||
| 3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
| 7/32 (#12) | 0.562 | 0.250 | .051/.080 | |||
| 1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
| 5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
| 3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
| 7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
| 1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
| 9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
| 5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
| 3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
| 7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
| 1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
| 1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
| 1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
| 1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
| 1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
| 1 5/8 | 3.750 | 1.750 | .153/.213 | |||
| 1 3/4 | 4.000 | 1.875 | .153/.213 | |||
| 1 7/8 | 4.250 | 2.000 | .153/.213 | |||
| 2 | 4.500 | 2.125 | .153/.213 | |||
| 2 1/4 | 4.750 | 2.375 | .320/.248 | |||
| 2 1/2 | 5.000 | 2.625 | .210/.280 | |||
| 2 3/4 | 5.250 | 2.875 | .228/.410S | |||
| 3 | 5.500 | 3.125 | .249/.327 | |||
ASTM A193 B6X hex nut thread types
ASME SA 193 Grade B6X Nut Bolt Packing
Sample Packing
Bubble Wrap Packing
Box Packing
If you searching a supplier from these places check our suppliers below
| Products | We supplied to following Locations |
|---|---|
| Astm A193 B6x Stud Bolts | United Arab Emirates, Norway, Malaysia, Turkey |
| Astm A193 B6x Heavy Hex Nuts | Dammam -KSA, Indonesia, Belgium, Philippines. |
| Astm A193 Grade B6x Full Thread Stud Bolts And Nuts | Canada, Singapore, Malaysia, Philippines |
| Studs And Bolts B6x Astm A193 B6x | Japan, Europe, Romania, Malaysia |
| M12 High Tensile Black Astm A193 Grade B6x Stud Bolt | Colombia, Malaysia, Sweden, China |
| Plain Astm A193 B6x Heavy Hex Bolts And Nuts | Dubai, Netherlands, Russia, Malaysia |
| Astm A193 B6x Double End Stud Bolt | South Africa, Saudi Arabia, Kuwait, Brazil |
| Astm A193 B6x Stud Bolt | Philippines, Nigeria, Australia, UK |
| M8x50 Bolts Bolt Astm A193 B6x | Oman, Malaysia, Hong Kong, UAE |
| Astm A193 B6x Hexagon Stud Bolts With Nut | South Africa, Bahrain, Singapore |
| Full Thread Astm A193 B6x Stud Bolt | France, Thailand, Europe, Qatar |
| Astm A193 Gr B6x Hex Heavy Structural Bolt | Germany, Czechia, Malaysia, Thailand |
| Alloy Steel Stud Bolt Astm A193 B6x With Nut | Finland, Malaysia, USA, Bangladesh |
| Unc Hot Dip Galvanizing M14*75 Astm A193 B6x Stud Bolts And Nuts | Italy, Iran, Chile, Singapore |
| Din912 Astm A193 B6x Allen Cup Head Or Hex Socket Head Bolt | Egypt, Spain, UK, Mexico |
| Astm A193 Grade B6x Socket Head Cap Screws M41 M60 | Ellington -United States, Poland, Canada, UK |
| Astm A193 Grade B6X Full Thread Stud Bolts And Nuts | United Kingdom -UK, Europe, UAE, Malaysia |