• info@vineshsteel.com
  • +91 - 022 - 66541072

ASME SA182 F5 Slip on Flange and A182 F5 Cl2 Forging material manufacturer in India

Grade F5 is a type of alloy steel that is intended to be used for applications with elevated temperatures. Available in various classes and different sizes, one of the most common specifications followed by manufacturers across the globe is ASTM A182. In addition to this ASTM specification, producers also use Asme B16.5 as a standard during the manufacture of flange components.

ASTM A182 Grade F5 Flanges

While the characteristics of alloy steels like ASTM A182 Grade F5 Flanges are already placed at a significantly higher level than that of carbon steel grades, the use of heat treatment to process them yields better mechanical properties. It is typical for these wrought grade materials to be supplied in an annealed, or normalized condition. Normalizing does two things to steel. First, the impurities are eliminated, and second, the Astm A182 F5 Threaded Flange gains higher levels of both hardness and strength. Normalizing also makes the grain of alloy steel more uniform. Similar to normalizing, annealing carried out on the Sa A182 F5 Material makes the grains more homogenous, improving their ductility and agility. This in turn helps the producer form durable, tough and sustainable good quality Asme B16.5 Alloy Steel F5 Flanges with optimized hardness. Tempering is a process that is necessary to seal the deal in alloy steel grades, especially since they improve the strength, and cause a reduction in the embrittlement of the alloy by lowering its hardness. A hard alloy tends to be brittle and hence, won’t be able to perform as desired or worse, cause failure. The chemical composition of the Astm A182 F5 Slip On Flange includes chromium and small quantities of both manganese and silicon, which are known to impart toughness to the alloy. Although the corrosion resistance of this alloy is not at par with stainless steel alloys, the Alloy Steel F5 Flanges exhibit good resistance to atmospheric corrosion.

Do not forget to compare our price with other Alloy Steel A182 Grade F5 Weld Neck Flanges supplier in India

 

Specification Schedule of ASME SA182 F5 Slip on Flange

Buy from ASME SA 182 Gr F5 Steel Blind Flanges manufacturers in India for better price and quality Check Astm A182 Gr F5 Equivalent

ASTM Specifications list ASTM A182 and ASME SA182
Dimensions ANSI/ASME B16.5, B16.48, BS4504, BS 10, B 16.47 Series A & B, EN-1092, DIN, etc.
All Standard DIN, ANSI, ASME, BS, EN Flange, etc.
Size in inches 1/2 inch to 36 inch
Class / Pressure Rating Class 150 lbs, 300 lbs, 600 lbs, 900 lbs, 1500 lbs, 2500 lbs, PN6, PN10, PN16, PN25, PN40, PN64
Flange Face Type Small Tongue, Lap-Joint Face, Raised Face, Ring Type Joint, Flat Face, Large Male-Female, Small Male-Female, Large Tongue & Groove Flanges manufacturer and Supplier
Flanges Marking All Flanges are marked as follows: Supplier or Manufacturer’s Name, Size, Class, Bore, Dimension, Material, Heat No. Or according to the customer’s request.
Supplier and Distributors Located in Indore, Santiago, Howrah, Gurgaon, Montreal, Ahmedabad, New Delhi, London, Gimhae si, Hyderabad, Baroda, Port of Spain, Mexico, Ankara, Sydney, Calgary, Ludhiana, Ranchi, Riyadh, Ernakulam, Janeiro, Noida, Ahvaz, Bengaluru, Melbourne, Nagpur, Manama, Kolkata, Coimbatore, Courbevoie, Mumbai, Gujarat, Istanbul, Kuwait, India, Karachi, Kanpur, Bogota, Pimpri Chinchwad, Perth, Khobar, Surat, Abu Dhabi, Dammam, Caracas, Bangalore, Jamshedpur, Muscat, Tehran, Lagos, Ludhiana, Vadodara, Thiruvananthapuram, Rajkot, Chennai

Most Popular Types Of SA182 F5 Cl2 Pipe Flange

Alloy steel ASTM A182 GR F5 BL flange

Alloy steel ASTM A182 GR F5 BL flange

ASTM A182 F5 alloy steel blind flange

ASTM A182 F5 alloy steel blind flange

2 Inch, 300#, SCH 80 Alloy F5 Orifice Flange

2 Inch, 300#, SCH 80 Alloy F5 Orifice Flange

10 Inch, 600#, API 590, FF, A182 F5 Class 2 SORF Flanges

10 Inch, 600#, API 590, FF, A182 F5 Class 2 SORF Flanges

ASTM A182 F5 weld neck alloy steel flange

ASTM A182 F5 weld neck alloy steel flange

A182 F5 Flange 14 Inch ANSI B16.5 SW RF FF RTJ flange class 150 to 2500

A182 F5 Flange 14 Inch ANSI B16.5 SW RF FF RTJ flange class 150 to 2500

2 Inch, CL1500, A182 F5 Blind Flange

2 Inch, CL1500, A182 F5 Blind Flange

Alloy Steel ASTM A182 F5 weld neck Flange

Alloy Steel ASTM A182 F5 weld neck Flange

20 Inch, Class 150, SA 182 Gr F5 Spectacle Blind Flange

20 Inch, Class 150, SA 182 Gr F5 Spectacle Blind Flange

3 In, Class 300, SCH 40, Raised Face, ASTM A182 F5 Weld Neck Orifice Flange

3 In, Class 300, SCH 40, Raised Face, ASTM A182 F5 Weld Neck Orifice Flange

F5 RFWN Flange Raised Face Weld neck Flange

F5 RFWN Flange Raised Face Weld neck Flange

ASTM A182 F5 Alloy Steel Flange

ASTM A182 F5 Alloy Steel Flange


Chemical Composition of ASME SA 182 Gr F5 Steel Flanges

Manufacturer and supplier of ASTM A182 F5 Cl1 Forged Flanges in India, view F5 steel Lap Joint Flanges weight chart & SA 182 Gr F5 Pipe Flange dimensions
Grade Carbon Manganese Silicon Sulfur Phosphorus Chromium Molybdenum
A182 F5 0.15 0.3 - 0.6 0.5 0.03 0.03 4 - 6 0.044 - 0.65

ASTM A182 F5 Cl1 Forged Flanges Mechanical Properties

Grade Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
A182 F5 275 485 20

Sizes of F5 steel Blind Flanges

Finding the best Alloy Steel ASTM A182 F5 Blind Flanges manufacturers for a critical use? Then look no further! A leading exporter and supplier of SA 182 Gr F5 Steel Socket weld Flanges in India
Products Size
ASTM A182 F5 Slip-On Flange F5 Threaded Flanges Sizes 1/8 inch – 36 inch Raised or Flat Face
ASTM A182 Gr F5 Socket Weld Flange ASTM A182 Grade F5 Weld Weld Flange
Alloy Steel Grades F5 Forged Flange Low Alloy Steel F5 Orifice Flange
ASTM A182 F5 Alloy Steel RTJ Flange ASTM A182 Grade F5 Pipe Flange
Grade F5 ASTM A182 Flange ASTM A182 F5 Lap Joint Flange
ASTM A182 Grade F5 Plate Flange ASTM A182 Gr F5 Blind Flange

SA 182 Gr F5 Steel Slip on Flanges Weight Chart

Pipe Normal Diam. Outer Diameter Flange Thickness Of Flange Min Diameter of Hub Diameter of Raised Face Length Hub.Y Thread Length Diameter of Bolt Circle Diameter of Bolt Holes Number of Bolts Diameter of Bolts (inch) KG LB
inch dn O C X G Y T BC BH BN BD
3/4" 20 98.50 12.70 38.10 42.90 15.70 15.70 69.90 15.80 4 1/2" 0.7 1.5
1" 25 108.00 14.20 49.30 50.80 17.50 17.50 79.30 15.80 4 1/2" 0.8 1.8
1/2" 15 89.00 11.20 30.20 35.10 15.70 15.70 60.50 15.80 4 1/2" 0.4 0.9
1-1/4" 32 117.50 15.70 58.70 63.50 20.60 20.60 88.90 15.80 4 1/2" 1.2 2.6
2" 50 152.50 19.10 77.70 91.90 25.40 25.40 120.70 19.10 4 5/8" 2.3 5.1
2-1/2" 65 178.00 22.40 90.40 104.60 28.40 28.40 139.70 19.10 4 5/8" 3.7 8.1
4" 100 228.50 23.90 134.90 157.20 33.30 33.30 190.50 19.10 8 5/8" 5.9 13
1-1/2" 40 127.00 17.50 65.00 73.20 22.40 22.40 98.60 15.80 4 1/2" 1.5 3.3
3" 80 190.50 23.90 108.00 127.00 30.20 30.20 152.40 19.10 4 5/8" 4.1 9
3-1/2" 90 216.00 23.90 122.20 139.70 31.80 31.80 177.80 19.10 8 5/8" 5.1 11.2
10" 250 406.50 30.20 304.80 323.90 49.30 49.30 362.00 25.40 12 7/8" 18 39.5
5" 125 254.00 23.90 163.60 185.70 36.60 36.60 215.90 22.40 8 3/4" 7 15.4
6" 150 279.50 25.40 192.00 215.90 39.60 39.60 241.30 22.40 8 3/4" 8.4 18.5
8" 200 343.00 28.40 246.10 269.70 44.50 44.50 298.50 22.40 8 3/4" 13 28.6
12" 300 482.50 31.80 365.30 381.00 55.60 55.60 431.80 25.40 12 7/8" 29 64
14" 350 533.50 35.10 400.10 412.80 57.20 57.20 476.30 28.50 12 1" 39 86
24" 600 813.00 47.80 663.40 692.20 82.60 82.60 749.30 35.10 20 1 1/4" 97 214
16" 400 597.00 36.60 457.20 469.90 63.50 63.50 539.80 28.50 16 1" 47 103
18" 450 635.00 39.60 505.00 533.40 68.30 68.30 577.90 31.80 16 1 1/8" 57 126
20" 500 698.50 42.90 558.80 584.20 73.20 73.20 635.00 31.80 20 1 1/8" 76 167

Do you belong to following locations Please see what we supply here

Products We supplied to following Locations
Alloy steel ASTM A182 GR F5 BL flange USA, Bangladesh, Finland, Malaysia
ASTM A182 F5 alloy steel blind flange Norway, Malaysia, Turkey, United Arab Emirates (UAE)
2 Inch, 300#, SCH 80 Alloy F5 Orifice Flange Malaysia, Philippines, Canada, Singapore
10 Inch, 600#, API 590, FF, A182 F5 Class 2 SORF Flanges Romania, Japan, Europe, Malaysia
ASTM A182 F5 weld neck alloy steel flange Sweden, China, Colombia, Malaysia
A182 F5 Flange 14 Inch ANSI B16.5 SW RF FF RTJ flange class 150 to 2500 Russia, Dubai, Netherlands, Malaysia
2 Inch, CL1500, A182 F5 Blind Flange Kuwait, Brazil, South Africa, Saudi Arabia (KSA)
Alloy Steel ASTM A182 F5 weld neck Flange Australia, Philippines, Nigeria, UK
20 Inch, Class 150, SA 182 Gr F5 Spectacle Blind Flange Hong Kong, Oman, Malaysia, UAE
3 In, Class 300, SCH 40, Raised Face, ASTM A182 F5 Weld Neck Orifice Flange Bahrain, Singapore, South Africa
F5 RFWN Flange Raised Face Weld neck Flange Europe, France, Thailand, Qatar
ASTM A182 F5 Alloy Steel Flange Malaysia, Germany, Czechia, Thailand
Alloy Steel SA-336 Gr. F5 15Cr5Mo Flanges Belgium, Philippines, Dammam -KSA, Indonesia.
Grade F5 Alloy Steel threaded Flange Chile, Singapore, Italy, Iran
ASTM A182 F5 F5a Slip on Flange UK, Mexico, Egypt, Spain
ASTM A182 F5 15cr5mo Alloy Steel Flange Poland, Canada, Ellington -United States, UK
A182 F5 alloy steel flange Threaded flange Europe, UAE, United Kingdom -UK, Malaysia