SA182 F11 Cl2 Slip on Flange and A182 F11 Forged Flanges manufacturer in India
It is difficult for a component to withstand high temperature environments, especially since heat, and in some cases, moisture developed by heat has a tendency to corrode the metal. For an alloy to exhibit good resistance to thermal environments, they need to have a composition that permits their stability. For instance, the chemical composition of ASTM A182 F11 Flange contains small amounts of elements like chromium, molybdenum, silicon, and manganese, all of which allow the component to act in an efficient manner despite being situated in a high thermal zone.
There are specifications that permit the manufacturer to produce flanges of low alloy steel grades that could be used in such environments. The Asme Sa182 F11 Class 2 Flange, which belongs to this category of steel is useful in demanding high temperature settings. However, they are not recommended to be used in applications that require corrosion resistance because they lack a higher content of the above mentioned elements in their chemical composition. But in comparison to basic carbon steel alloys, the corrosion resistance properties of ASTM A182 F11 Blind Flanges are enhanced. Though this is not the only parameter where low alloy steels supersede carbon steel alloys. In fact, the inclusion of even trace amounts of chromium and molybdenum in their alloy improves their tensile and yield strength, toughness, and durability. Increasing their yield strength is possible by using heat treatments on the Astm A182 Alloy Steel F11 Flanges. Typically heat treatments used on the alloy include tempering, annealing, and normalizing, all of which serve their respective purposes. Tempering generally reduces the high hardness achieved by the Alloy Steel F11 Slip On Flanges after it has been quenched, causing it to balance this property without the alloy becoming susceptible to embrittlement. Annealing and normalizing the Sa182 F11 Pipe Flanges improves ductility, agility, strength, toughness while making the grains of the metal more uniform.
A182 F11 Class 2 Plate Flange Supplier in India, Check F11 Steel Material Equivalent, ASME SA 182 Gr F11 Lap Joint Flanges Dimension
Table of Contents
- Specifications Of ASTM A182 F11 Flange
- Common Types Of A182 F11 Forged Flanges
- A182 F11 Class 2 Plate Flange Pressure rating
- ASME SA 182 Gr F11 Blind Flange Dimension Chart
- 150 Lb ASTM A182 F11 Flange Dimensions
- Class 300 Alloy Steel F11 Slip On Flanges Dimension
- Dimension of 400 LBS Asme Sa182 F11 Class 2 Flange
- Class 600 Astm A182 Alloy Steel F11 Flanges Dimensions Table
- 900# Sa182 F11 Pipe Flanges Dimensions Standards
- 1500 LBS ASTM A182 F11 Flange Dimension Table
- Class 2500 A182 F11 Forged Flanges Dimensions Chart
- Chemical Structure of Alloy Steel SA182 F11 weld neck flange
- A182 F11 Class 2 Plate Flange Mechanical Behaviour
- Equivalent material of ASTM A182 F11 Class 2 Blind Flange
- ASTM A182 F11 Flange Size Chart
- Astm A182 F11 Flange Hs Code
- Alloy Steel F11 Slip On Flanges Application
Specifications Of ASTM A182 F11 Flange
Check A182 F11 Flanges Pressure rating in Class 150 to 2500, Manufacturer and Supplier of Alloy Steel SA182 F11 Blind flange in India
| Specifications List | ASTM A182 / ASME SA182 |
|---|---|
| Size range | 1/2 to 48 Inch |
| Standard DIN | 6, 16, 10, 40, 25 Bar/ PN6 PN16 PN10 PN40 PN25, PN64 |
| Standard ANSI | Class 150 LBS to 2500 LBS |
| Standard UNI | 6, 16, 10, 40, 25 Bar |
| Standard JIS | 6, 16, 10 30, 20, 63, 40 K |
| Standard EN | 6, 16, 16, 40, 25 Bar |
| Flange Face Type | Lap-Joint Face, Raised Face, Flat Face, Small Tongue, Large Male-Female, Ring Type Joint, Small Male-Female, Large Tongue & Groove Flanges manufacturer and Supplier |
| Flanges Marking | All Flanges are marked as follows: Supplier or Manufacturer’s Name, Size, Class, Bore, Dimension, Material, Heat No. Or according to the customer’s request. |
Common Types Of A182 F11 Forged Flanges
Astm A182 F11 Cl2 Alloy Steel Class 150 Npt Flanges
Alloy Steel Astm A182 F11 Slip On Flanges
F11 Cl2 Alloy Steel Ansi B16.5 Blind 900# 4 Flanges
Astm A182 F11 Forged Threaded Flanges
F11 Alloy Steel Flat Face Ff Flanges
Astm A182 Gr F11 Wn Bl Sw Blind Flanges
Astm A182 Alloy Steel F11 Dn80 Threaded Flanges
Astm A182 F11 Alloy Steel Plate Flanges
Forged 1/2-24 Inch Astm A182 F11 So Blind Flanges
Astm A182 F11 Alloy Steel Weld Neck Raised Face Flanges
Forged Asme B16.5 Asme Sa182 Gr F11 So Wn Flanges
Alloy Steel Astm A182 F11 Wn Flanges Asme B16.5
A182 F11 Class 2 Plate Flange Pressure rating
Manufacturer of ASTM A182 F11 Class 2 Blind and Slip On Flange in Mumbai, View SA 182 Gr F11 Socket Weld chemical composition and price in India
| Temperature °F | Class 150 LBS | Class 300 LBS | Class 400 LBS | Class 600 LBS | Class 900 LBS | Class 1500 LBS | Class 2500 LBS |
| -20 to 100 | 265 | 695 | 925 | 1390 | 2085 | 3470 | 5785 |
| 200 | 260 | 680 | 905 | 1360 | 2035 | 3395 | 5660 |
| 800 | 80 | 510 | 675 | 1015 | 1525 | 2540 | 4230 |
| 400 | 200 | 640 | 855 | 1280 | 1920 | 3200 | 5330 |
| 500 | 170 | 620 | 830 | 1245 | 1865 | 3105 | 5180 |
| 600 | 140 | 605 | 805 | 1210 | 1815 | 3025 | 5040 |
| 650 | 125 | 590 | 785 | 1175 | 1765 | 2940 | 4905 |
| 700 | 110 | 570 | 755 | 1135 | 1705 | 2840 | 4730 |
| 300 | 230 | 655 | 870 | 1305 | 1955 | 3260 | 5435 |
| 750 | 95 | 530 | 710 | 1065 | 1595 | 2660 | 4430 |
| 1000 | 20 | 165 | 220 | 330 | 495 | 825 | 1370 |
| 850 | 65 | 485 | 650 | 975 | 1460 | 2435 | 4060 |
| 900 | 50 | 450 | 600 | 900 | 1350 | 2245 | 3745 |
| 950 | 35 | 280 | 375 | 560 | 845 | 1405 | 2345 |
ASME SA 182 Gr F11 Blind Flange Dimension Chart
| Nominal Pipe Size | Dimension | Weight in Kg | ||||
|---|---|---|---|---|---|---|
| Normal Pipe Size (Inche) |
Diameter Nominal | Flange Outer Diameter in MM |
Flange Thickness in MM |
Socket Weld | Weld Neck | Blind |
| 8 | 200 | 342.9 | 28.4 | 12.1 | 17.6 | 19.6 |
| 3/4 | 20 | 98.6 | 12.7 | 0.6 | 0.7 | 0.6 |
| 1 | 25 | 108 | 14.2 | 0.8 | 1 | 0.9 |
| 1 1/4 | 32 | 117.3 | 15.7 | 1 | 1.3 | 1.2 |
| 1 1/2 | 40 | 127 | 17.5 | 1.3 | 1.7 | 1.5 |
| 2 | 50 | 152.4 | 19.1 | 2.1 | 2.6 | 2.4 |
| 2 1/2 | 65 | 177.8 | 22.4 | 3.3 | 4.1 | 3.9 |
| 1/2 | 15 | 88.9 | 11.2 | 0.4 | 0.5 | 0.4 |
| 3 | 80 | 190.5 | 23.9 | 3.9 | 4.9 | 4.9 |
| 24 | 600 | 812.8 | 47.8 | 86.9 | 115 | 185.0 |
| 3 1/2 | 90 | 215.9 | 23.9 | 4.8 | 6.1 | 6.2 |
| 4 | 100 | 228.6 | 23.9 | 5.3 | 6.8 | 7.0 |
| 5 | 125 | 254 | 23.9 | 6.1 | 8.6 | 8.6 |
| 6 | 150 | 279.4 | 25.4 | 7.5 | 10.6 | 11.3 |
| 10 | 250 | 406.4 | 30.2 | 16.5 | 24 | 28.6 |
| 14 | 350 | 533.4 | 35.1 | 34.6 | 48.4 | 58.1 |
| 12 | 300 | 482.6 | 31.8 | 26.2 | 36.5 | 43.2 |
| 16 | 400 | 596.9 | 36.6 | 44.8 | 60.6 | 76.1 |
| 18 | 450 | 635 | 39.6 | 48.9 | 68.3 | 93.7 |
| 20 | 500 | 698.5 | 42.9 | 61.9 | 84.5 | 122.0 |
150 Lb ASTM A182 F11 Flange Dimensions
| Nominal Pipe sizes in Inches | Number of bolts used | Diameter of Flange in inches | Diameter of Bolt Holes in Inches | Diameter of Bolts in Inches | Bolt Circle in Inches |
|---|---|---|---|---|---|
| 1/4 | 4 | 3-3/8 | 0.62 | 1/2 | 2-1/4 |
| 1/2 | 4 | 3-1/2 | 0.62 | 1/2 | 2-3/8 |
| 3/4 | 4 | 3-7/8 | 0.62 | 1/2 | 2-3/4 |
| 1 | 4 | 4-1/4 | 0.62 | 1/2 | 3-1/8 |
| 1-1/4 | 4 | 4-5/8 | 0.62 | 1/2 | 3-1/2 |
| 1-1/2 | 4 | 5 | 0.62 | 1/2 | 3-7/8 |
| 2 | 4 | 6 | 0.75 | 5/8 | 4-3/4 |
| 2-1/2 | 4 | 7 | 0.75 | 5/8 | 5-1/2 |
| 3 | 4 | 7-1/2 | 0.75 | 5/8 | 6 |
| 3-1/2 | 8 | 8-1/2 | 0.75 | 5/8 | 7 |
| 4 | 8 | 9 | 0.75 | 5/8 | 7-1/2 |
| 5 | 8 | 10 | 0.88 | 3/4 | 8-1/2 |
| 6 | 8 | 11 | 0.88 | 3/4 | 9-1/2 |
| 8 | 8 | 13-1/2 | 0.88 | 3/4 | 11-3/4 |
| 10 | 12 | 16 | 1 | 7/8 | 14-1/4 |
| 12 | 12 | 19 | 1 | 7/8 | 17 |
| 14 | 12 | 21 | 1.12 | 1 | 18-3/4 |
| 16 | 16 | 23-1/2 | 1.12 | 1 | 21-1/4 |
| 18 | 16 | 25 | 1.25 | 1-1/8 | 22-3/4 |
| 20 | 20 | 27-1/2 | 1.25 | 1-1/8 | 25 |
| 24 | 20 | 32 | 1.38 | 1-1/4 | 29-1/2 |
Class 300 Alloy Steel F11 Slip On Flanges Dimension
| Nominal Pipe Size in Inch | Number of Bolt used | Bolt Circle in inch | Diameter of Bolts in inch | Diameter of Flange in inch | Diameter of Bolt Holes in inch |
|---|---|---|---|---|---|
| 1/4 | 4 | 2-1/4 | 1/2 | 3-3/8 | 0.62 |
| 1/2 | 4 | 2-5/8 | 1/2 | 3-3/4 | 0.62 |
| 3/4 | 4 | 3-1/4 | 5/8 | 4-5/8 | 0.75 |
| 1 | 4 | 3-1/2 | 5/8 | 4-7/8 | 0.75 |
| 1-1/4 | 4 | 3-7/8 | 5/8 | 5-1/4 | 0.75 |
| 1-1/2 | 4 | 4-1/2 | 3/4 | 6-1/8 | 0.88 |
| 2 | 8 | 5 | 5/8 | 6-1/2 | 0.75 |
| 2-1/2 | 8 | 5-7/8 | 3/4 | 7-1/2 | 0.88 |
| 3 | 8 | 6-5/8 | 3/4 | 8-1/4 | 0.88 |
| 3-1/2 | 8 | 7-1/4 | 3/4 | 9 | 0.88 |
| 4 | 8 | 7-7/8 | 3/4 | 10 | 0.88 |
| 5 | 8 | 9-1/4 | 3/4 | 11 | 0.88 |
| 6 | 12 | 10-5/8 | 3/4 | 12-1/2 | 0.88 |
| 8 | 12 | 13 | 7/8 | 15 | 1 |
| 10 | 16 | 15-1/4 | 1 | 17-1/2 | 1.12 |
| 12 | 16 | 17-3/4 | 1-1/8 | 20-1/2 | 1.25 |
| 14 | 20 | 20-1/4 | 1-1/8 | 23 | 1.25 |
| 16 | 20 | 22-1/2 | 1-1/4 | 25-1/2 | 1.38 |
| 18 | 24 | 24-3/4 | 1-1/4 | 28 | 1.38 |
| 20 | 24 | 27 | 1-1/4 | 30-1/2 | 1.38 |
| 24 | 24 | 32 | 1-1/2 | 36 | 1.62 |
Dimension of 400 LBS Asme Sa182 F11 Class 2 Flange
| Nominal Pipe Sizes in Inch | Diameter of Bolt Holes in inch | Number of Bolt used | Diameter of Flange in inch | Diameter of Bolts in inch | Bolt Circle in inch |
|---|---|---|---|---|---|
| 1/4 | 0.62 | 4 | 3-3/8 | 1/2 | 2-1/4 |
| 1/2 | 0.62 | 4 | 3-3/4 | 1/2 | 2-5/8 |
| 3/4 | 0.75 | 4 | 4-5/8 | 5/8 | 3-1/4 |
| 1 | 0.75 | 4 | 4-7/8 | 5/8 | 3-1/2 |
| 1-1/4 | 0.75 | 4 | 5-1/4 | 5/8 | 3-7/8 |
| 1-1/2 | 0.88 | 4 | 6-1/8 | 3/4 | 4-1/2 |
| 2 | 0.75 | 8 | 6-1/2 | 5/8 | 5 |
| 2-1/2 | 0.88 | 8 | 7-1/2 | 3/4 | 5-7/8 |
| 3 | 0.88 | 8 | 8-1/4 | 3/4 | 6-5/8 |
| 3-1/2 | 1 | 8 | 9 | 7/8 | 7-1/4 |
| 4 | 1 | 8 | 10 | 7/8 | 7-7/8 |
| 5 | 1 | 8 | 11 | 7/8 | 9-1/4 |
| 6 | 1 | 12 | 12-1/2 | 7/8 | 10-5/8 |
| 8 | 1.12 | 12 | 15 | 1 | 13 |
| 10 | 1.25 | 16 | 17-1/2 | 1-1/8 | 15-1/4 |
| 12 | 1.38 | 16 | 20-1/2 | 1-1/4 | 17-3/4 |
| 14 | 1.38 | 20 | 23 | 1-1/4 | 20-1/4 |
| 16 | 1.5 | 20 | 25-1/2 | 1-3/8 | 22-1/2 |
| 18 | 1.5 | 24 | 28 | 1-3/8 | 24-3/4 |
| 20 | 1.62 | 24 | 30-1/2 | 1-1/2 | 27 |
| 24 | 1.88 | 24 | 36 | 1-3/4 | 32 |
Class 600 Astm A182 Alloy Steel F11 Flanges Dimensions Table
| Nominal Pipe Sizes in Inch | Number of Bolt Used | Bolt Circle in inch | Diameter of Bolts in inch | Diameter of Flange in inch | Diameter of Bolt Holes in inch |
|---|---|---|---|---|---|
| 1/4 | 4 | 2-1/4 | 1/2 | 3-3/8 | 0.62 |
| 1/2 | 4 | 2-5/8 | 1/2 | 3-3/4 | 0.62 |
| 3/4 | 4 | 3-1/4 | 5/8 | 4-5/8 | 0.75 |
| 1 | 4 | 3-1/2 | 5/8 | 4-7/8 | 0.75 |
| 1-1/4 | 4 | 3-7/8 | 5/8 | 5-1/4 | 0.75 |
| 1-1/2 | 4 | 4-1/2 | 3/4 | 6-1/8 | 0.88 |
| 2 | 8 | 5 | 5/8 | 6-1/2 | 0.75 |
| 2-1/2 | 8 | 5-7/8 | 3/4 | 7-1/2 | 0.88 |
| 3 | 8 | 6-5/8 | 3/4 | 8-1/4 | 0.88 |
| 3-1/2 | 8 | 7-1/4 | 7/8 | 9 | 1 |
| 4 | 8 | 8-1/2 | 7/8 | 10-3/4 | 1 |
| 5 | 8 | 10-1/2 | 1 | 13 | 1.12 |
| 6 | 12 | 11-1/2 | 1 | 14 | 1.12 |
| 8 | 12 | 13-3/4 | 1-1/8 | 16-1/2 | 1.25 |
| 10 | 16 | 17 | 1-1/4 | 20 | 1.38 |
| 12 | 20 | 19-1/4 | 1-1/4 | 22 | 1.38 |
| 14 | 20 | 20-3/4 | 1-3/8 | 23-3/4 | 1.5 |
| 16 | 20 | 23-3/4 | 1-1/2 | 27 | 1.62 |
| 18 | 20 | 25-3/4 | 1-5/8 | 29-1/4 | 1.75 |
| 20 | 24 | 28-1/2 | 1-5/8 | 32 | 1.75 |
| 24 | 24 | 33 | 1-7/8 | 37 | 2 |
900# Sa182 F11 Pipe Flanges Dimensions Standards
| Nominal Pipe Sizes in Inch | Diameter of Flange in inch | Diameter of Bolts in inch | Bolt Circle in inch | Diameter of Bolt Holes in inch | Number of Bolt Used |
|---|---|---|---|---|---|
| 1/2 | 4-3/4 | 3/4 | 3-1/4 | 0.88 | 4 |
| 3/4 | 5-1/8 | 3/4 | 3-1/2 | 0.88 | 4 |
| 1 | 5-7/8 | 7/8 | 4 | 1 | 4 |
| 1-1/4 | 6-1/4 | 7/8 | 4-3/8 | 1 | 4 |
| 1-1/2 | 7 | 1 | 4-7/8 | 1.12 | 4 |
| 2 | 8-1/2 | 7/8 | 6-1/2 | 1 | 8 |
| 2-1/2 | 9-5/8 | 1 | 7-1/2 | 1.12 | 8 |
| 3 | 9-1/2 | 7/8 | 7-1/2 | 1 | 8 |
| 4 | 11-1/2 | 1-1/8 | 9-1/4 | 1.25 | 8 |
| 5 | 13-3/4 | 1-1/4 | 11 | 1.38 | 8 |
| 6 | 15 | 1-1/8 | 12-1/2 | 1.25 | 12 |
| 8 | 18-1/2 | 1-3/8 | 15-1/2 | 1.5 | 12 |
| 10 | 21-1/2 | 1-3/8 | 18-1/2 | 1.5 | 16 |
| 12 | 24 | 1-3/8 | 21 | 1.5 | 20 |
| 14 | 25-1/4 | 1-1/2 | 22 | 1.62 | 20 |
| 16 | 27-3/4 | 1-5/8 | 24-1/2 | 1.75 | 20 |
| 18 | 31 | 1-7/8 | 27 | 2 | 20 |
| 20 | 33-3/4 | 2 | 29-1/2 | 2.12 | 20 |
| 24 | 41 | 2-1/2 | 35-1/2 | 2.62 | 20 |
1500 LBS ASTM A182 F11 Flange Dimension Table
| Nominal Pipe Sizes in Inch | Diameter of Bolts in inch | Diameter of Flange in inch | Diameter of Bolt Holes in inch | Number of Bolt Used | Bolt Circle in inch |
|---|---|---|---|---|---|
| 1/2 | 3/4 | 4-3/4 | 0.88 | 4 | 3-1/4 |
| 3/4 | 3/4 | 5-1/8 | 0.88 | 4 | 3-1/2 |
| 1 | 7/8 | 5-7/8 | 1 | 4 | 4 |
| 1-1/4 | 7/8 | 6-1/4 | 1 | 4 | 4-3/8 |
| 1-1/2 | 1 | 7 | 1.12 | 4 | 4-7/8 |
| 2 | 7/8 | 8-1/2 | 1 | 8 | 6-1/2 |
| 2-1/2 | 1 | 9-5/8 | 1.12 | 8 | 7-1/2 |
| 3 | 1-1/8 | 10-1/2 | 1.25 | 8 | 8 |
| 4 | 1-1/4 | 12-1/4 | 1.38 | 8 | 9-1/2 |
| 5 | 1-1/2 | 14-3/4 | 1.62 | 8 | 11-1/2 |
| 6 | 1-3/8 | 15-1/2 | 1.5 | 12 | 12-1/2 |
| 8 | 1-5/8 | 19 | 1.75 | 12 | 15-1/2 |
| 10 | 1-7/8 | 23 | 2 | 12 | 19 |
| 12 | 2 | 26-1/2 | 2.12 | 16 | 22-1/2 |
| 14 | 2-1/4 | 29-1/2 | 2.38 | 16 | 25 |
| 16 | 2-1/2 | 32-1/2 | 2.62 | 16 | 27-3/4 |
| 18 | 2-3/4 | 36 | 2.88 | 16 | 30-1/2 |
| 20 | 3 | 38-3/4 | 3.12 | 16 | 32-3/4 |
| 24 | 3-1/2 | 46 | 3.62 | 16 | 39 |
Class 2500 A182 F11 Forged Flanges Dimensions Chart
| Nominal Pipe Sizes in Inch | Diameter of Flange in inch | Bolt Circle in inch | Diameter of Bolts in inch | Number of Bolt Used | Diameter of Bolt Holes in inch |
|---|---|---|---|---|---|
| 1/2 | 5-1/4 | 3-1/2 | 3/4 | 4 | 0.88 |
| 3/4 | 5-1/2 | 3-3/4 | 3/4 | 4 | 0.88 |
| 1 | 6-1/4 | 4-1/4 | 7/8 | 4 | 1 |
| 1-1/4 | 7-1/4 | 5-1/8 | 1 | 4 | 1.12 |
| 1-1/2 | 8 | 5-3/4 | 1-1/8 | 4 | 1.25 |
| 2 | 9-1/4 | 6-3/4 | 1 | 8 | 1.12 |
| 2-1/2 | 10-1/2 | 7-3/4 | 1-1/8 | 8 | 1.25 |
| 3 | 12 | 9 | 1-1/4 | 8 | 1.38 |
| 4 | 14 | 10-3/4 | 1-1/2 | 8 | 1.62 |
| 5 | 16-1/2 | 12-3/4 | 1-3/4 | 8 | 1.88 |
| 6 | 19 | 14-1/2 | 2 | 8 | 2.12 |
| 8 | 21-3/4 | 17-1/4 | 2 | 12 | 2.12 |
| 10 | 26-1/2 | 21-1/4 | 2-1/2 | 12 | 2.62 |
| 12 | 30 | 24-3/8 | 2-3/4 | 12 | 2.88 |
Chemical Structure of Alloy Steel SA182 F11 weld neck flange
| Grades | Carbon | Manganese | Silicon | Sulfur | Phosphorus | Chromium | Molybdenum |
| ASTM A182 F11 Flange | 0.05 - 0.15 | 0.3 - 0.6 | 0.5 - 1 | 0.03 | 0.03 | 1 - 1.5 | 0.044 - 0.65 |
A182 F11 Class 2 Plate Flange Mechanical Behaviour
PED Approved ASTM A182 Gr F11 Cl.1 RTJ Flanges Supplier in India, View Alloy Steel F11 Flanges Dimension Chart and SA 182 Gr F11 Pipe Flange Weight Chart
| Mechanical Properties | Original Value | Comments |
|---|---|---|
| Hardness, Brinell | 143 - 207 | |
| Tensile Strength, Yield | 275 MPa | |
| Tensile Strength, Ultimate | 485 MPa | |
| Elongation at Break | 20 % | in 2 in. (50 mm) |
| Reduction of Area | >= 30 % |
Equivalent material of ASTM A182 F11 Class 2 Blind Flange
| Material Group | Common Name | Type | UNS | Forging Spec. | Casting Spec. Equivalent | DIN | DIN W. No |
|---|---|---|---|---|---|---|---|
| ASTM A182 F11 Flange | 1.1/4Cr-1/2Mo | K11572 | A182-F11 cl2 | A217-WC6 | 13CRM044 | 1.7335 | Up to 593ºC (1100ºF) |
ASTM A182 F11 Flange Size Chart
| Dimension Standards | Size Range | Ratings |
|---|---|---|
| F11 Socket Weld Flanges | 1/2" to 24" | 150# to 2500# |
| A182 F11 Lapped joint Flanges | 1" TO 24" | 300# TO 2500# |
| SA182 Gr F11 flange | 26" TO 48" | 150# TO 600# |
| Chromoly F11 lap joint flange | 12" TO 60" | 150# to 900# |
| Low F11 WNRF Flanges | 26" TO 60" | -- |
| SA182 F11 RTJ Flange | 2 1/6" TO 30" | 2000 PSI TO 20000 PSI |
| A182 Gr F11 Flat Flange | 1/2" TO 24" | 150# TO 2500# |
| F11 Slip On Flanges | DN10 TO DN3600 | PN6 TO PN160 |
Astm A182 F11 Flange Hs Code
| HSN Code | Description |
|---|---|
| 73071190 | Astm A182 F11 Flange |
Alloy Steel F11 Slip On Flanges Application
- Pharmaceuticals
- Off-Shore Oil Drilling Companies
- Gas Processing
- Petrochemicals
- Power Generation
- Sea Water Equipment
- Specialty Chemicals
- Chemical Equipment
- Pharmaceutical Equipment