• info@vineshsteel.com
  • +91 - 022 - 66541072

Api 17d Swivel Flange Manufatcurer in India

Specification API 17D is used in the manufacture of flanges intended for subsea applications. This means the production unit of the wells is located on a seabed. Hence, the alloy used in this specification needs to be able to withstand currents and exhibit some level of corrosion resistance. Generally, alloys like carbon steel or stainless steel grades are used in the construction of these flanges. Stainless steel is preferred n the production of an API 17D SS Flange because of its superior resistance to corrosion and higher mechanical characteristics.

API 17D SS Flange

API 17D is a specification that is a part of ISO standard 13628. This standard details the several parameters for the API 17D Flange including the design, tooling necessary, testing and quality control, storing, as well as shipping of the entire subsea piping system. Subsea applications may require an assembly that needs higher tensile properties, especially high toughness because the environment applies high pressure to the piping system, which in turn is stressful. The Api 17d Carbon Steel Swivel Flange is more suited to those applications that need high pressure and increased tensile strength. The equipment in Subsea applications is not new to stress, as they are subjected to surface tension on a daily basis. Surface tension acts as an opposing force, to the internal force in the piping system. Shutting these systems is a task. This is why the use of stainless steel Api 17d Blind Flange helps to reduce the stress caused in the system with its high mechanical strength. In the case of an Api 17d Swivel Flange, the component is required to be connected to a piping system via welding. Therefore, it is necessary that the material’s weldability should range from good to excellent. Although the weldability of carbon steel is lower than stainless steel, the ISO 13628-4 Swivel Flange produced in carbon steel tends to be more cost effective.

Check ISO 13628-4 Swivel Flange Dimensions and 17d SS Blind Flange Size Chart Online

 

Api 17d Ss Flange Specification Chart

PED approved Api 17d Carbon Steel Swivel Flange manufacturer in India, Buy ISO 13628-4 SS Flange at best price ex Mumbai

Material Specification Of: API 17D SS Flange
API 17d Standard Cover : pressure ratings & temperature ratings, materials, marking, dimensions, weight, tolerances, testing
Contact Faces For API 17d RTJ (Ring Type Joint), FF (Flat Face), RF (Raised Face), T/G (Tongue And Groove ), M/F (Male And Female)
Thickness Of API 17d Normal Pipe Size ≤ 18
Size Chart Normal Pipe Size 1/2 to NPS 24 inch
Materials Stainless Steel (Grade 304/L, 316/L), Carbon Steel (ASTM A105 And ASTM A350), Alloy Steel (ASTM A182), Mild Steel, Duplex Steel, Pressure Vessel Steel, Titanium, Super Duplex Steel, Nickel Alloy, Monel, Inconel, Hastelloy, Copper Nickel, Cast Iron, Wrought Iron.
Low Temperature Of API 17d Above -29 Degree C (−20°F)
Bore Diameter Of ANSI B16.5 Normal Pipe ≤ 10
Flanges Standards EN 1092-1, JIS, ASME B16.5, ASME B16.47 type A, UNI, DIN
API 17d Pressure Rating Class 150 To Class 2500
High Temperature Of API 17d Above 200°C (400°F) For Class 150 Or Above 400°C (750°F)
API 17d Marking Standard Name of Manufacturer
Schedule
Type of Flange Facing
Nominal Pipe Size
Pressure Class
ASME B16 Designation
API 17d Bolt Type high strength bolts
medium strength bolts
low strength bolts
European Standard Flanges JIS B2220 Flanges (5k to 30k) and KS1503 flanges
Russian-Standard Flanges GOST 12820 / 12821-80, DIN, UNI, EN 1092-1
South African Standard Flanges SANSflanges And SABS flanges
Surface Finish Of API 17d smooth, concentric serrated, stock
Advantages Of Pipe Flange Used to Connect Pipe System
Easy Repair Pipe System
Assembled Without Welding
Flange Face Type Small Male-Female, Lap-Joint Face, Raised Face, Ring Type Joint, Flat Face, Small Tongue, Large Male-Female, Large Tongue & Groove Flanges manufacturer and Supplier
Flanges Marking All Flanges are marked as follows: Supplier or Manufacturer’s Name, Size, Class, Bore, Dimension, Material, Heat No. Or according to the customer’s request.
Supplier and Distributors Located in Howrah, Montreal, Ahmedabad, Karachi, Coimbatore, Gimhae si, Santiago, Hyderabad, Lagos, Ernakulam, Tehran, Vadodara, Kuwait, Kanpur, Bengaluru, Mexico, Ahvaz, Perth, India, Janeiro, Mumbai, Istanbul, New Delhi, Sydney, Gujarat, Rajkot, Noida, Ankara, London, Caracas, Gurgaon, Surat, Ludhiana, Abu Dhabi, Pimpri Chinchwad, Manama, Ludhiana, Riyadh, Thiruvananthapuram, Jamshedpur, Dammam, Kolkata, Muscat, Khobar, Bogota, Baroda, Courbevoie, Bangalore, Port of Spain, Indore, Calgary, Chennai, Melbourne, Nagpur, Ranchi

Api 17d Swivel Flange Types

Buy directly from ISO 13628-4 Weld Neck Flange manufacturers in India for high quality and better price, Check Api 17d Threaded Flange Dimensions
Api 17d Blind Flange

Api 17d Blind Flange

Api 17d Ss Flange

Api 17d Ss Flange

Api 17d Swivel Flange

Api 17d Swivel Flange

Api 17d Swivel Flange Dimensions

Supplier of Api 17d Swivel Flange, buy Non-Standard Sizes from stock, view online ISO 13628-4 Stainless Steel Blind Flange price and Api 17d Weld Neck Flange Dimensions
API 17D SV
Flange / Hub
API 16A Hub API 16A Clamp Number
2-1/16" 5M 2-1/16" 5M 1
2-9/16" 5M 2-9/16" 5M 2
3-1/8" 5M 3-1/8" 5M 4
4-1/16" 5M 4-1/16" 5M 5
4-1/16" 10M 4-1/16" 10M 6
9" 5M 9" 5M 8
9" 10M 9" 10M 10
11" 5M 11" 5M 10
13-5/8" 10M 13-5/8" 10M 15